Question about Hobart Welders Champion 500433A Factory Reconditioned 10,000 Watt Generator

1 Answer

Need transformer for Hobart Cybertig CT300

I need a control transformer for a Hobart CT 300 230/460 single phase welder. If you have one or know where to find one, could you please contact me.

Thanks,

Steve Nelson

Posted by on

  • Stumpy61 Feb 15, 2009

    I have a Hobart CT300 cybertig and have no power on secondary windings of the control transformer. I have 110 volts going to L1and L2 on terminal strip but nothing coming back. Can this transformer be rewound. If so how much? Please advise.

    Stumpy

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Hi Steve
my name is Rob

The cyber tig brand covers a lot of ground some of it older than me!

critical questions
do you have a parts list?

can you get from the machine
Model number
Spec number

do you have any drawings?

if these are all no all is not lost.
I can get a transformer custom made. i would need some details from the old unit.
Please let me know.

Regards
Rob Lee

Posted on Feb 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electric Phases for Hobart Oven


you must understand this : your electric oven must be indicate if it is a single phase( use 3 wires for 230 2 hot wires + 1 Neutral see the diagram like dryer? you must sure about this. Normally any appliance for home are single phase NOT 3 phase.

2) If you electric oven, say 3 PHASES( use 4 WIRES, 3 hot wires+1 Neutral wires) this for industrial application +comercial 270266c5-a0ad-44dc-9f40-e963255d47f5.jpgNOT for home

However if you system is 3 phase you must need to install 3phase transformer.ba1c9d4d-85e3-4744-8ce5-2f25c6e34ad3.jpg

Jul 18, 2013 | Hobart HEC501-240V Electric Oven

1 Answer

Electrical wiring


The CP-300 and CP-200 were never designed to run on single phase. You can buy a 3-phase generator (see military surplus) or a phase converter. You will need a pretty big one - like one rated for 20hp to use the full potential of the welder. That is also pretty expensive - say $1000. However, if you have a shop, you can buy used 3-phase equipment sometimes significantly cheaper than 2-phase stuff. So you buy that expensive converter and save money on all the other equipment you will buy. Or sell it. Or scrap it - some older welders had big copper wound transformers - a few hundred bucks worth of copper.... some had aluminum though... Good luck.

Jul 08, 2013 | Miller matic 140 Mig Welding Package W/As...

1 Answer

I needed to know the PH for a h600 11344142 Hobart mixer... And is it a single Or 3 face??


Hello Jbabajanov,

I understand that you want to know about the HP (Horse Power) of a H600, 60 quart mixer and weither it is a single or three phase.

All H600 Hobart mixers are equiped with a 2 horse power motor.

As to wether it is single or three phase you will need to look at the service tag of the machine. If is listed on it weather it is single or three phase.

Thank you for choosing FixYa.com

Justin

May 13, 2011 | Hobart H600 Stand Mixer

1 Answer

Where can i get parts for my hobart welding machine but is a old welder


Your local welding shop supply will be able to give you advice, the guys at Lowes and farm supply shops just sell the welders

Oct 05, 2010 | Hobart Handler 125 115 Volt 30 To 125 Amp...

1 Answer

How to from 480 to 230 on a 300r 3 phase hobart welder


Assuming 230 volt three phase primary you would need an autotranformer. A very large one. If only 230 single phase is available then it isn't a practical posibility. Probably cheaper to find a different welding machine.

Apr 25, 2010 | Hobart Welding Tools

1 Answer

Need to change oven from 440 3 phase to 220 single phase hobart cn90 oven


It can be done with a transformer, 480/ 240 single phase transformer to get the lower voltage. Then the oven will require some wiring changes to get all the elements and controls connected to two hot wires instead of three. The transformed will be sized to the wattage rating of the oven. This is a only basic description of what needs to take place.

Sep 05, 2009 | Hobart Ovens

1 Answer

Arc start board


At your nearest Miller distributor (almost all gaz reseller)

Jun 03, 2009 | Hobart Welders Champion 500433A Factory...

Not finding what you are looking for?
Hobart Welders Champion 500433A Factory Reconditioned 10,000 Watt Generator Logo

493 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Welding Tools Experts

Troy
Troy

Level 1 Expert

35 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Bill Boyd

Level 3 Expert

34837 Answers

Are you a Hobart Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...