Tv does not power up

It' seems short circuit . kindly check your input card and power supply .

The product is no good any more.

The tv now is completely dead,no LED power light indication at all?Yes,than the tv power supply board 90-95% it is alway the problems and the causes.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

the picture tube (what makes the TV picture work) has blown out. Just call you nearest tv reapair shop and purchase a new one. (these are kind of expensive!)

(Also, if it's fifteen years old, i think it's time to get a new T.V. hint. hint.)

I am looking for a couple of parts for my zenith tv model # A27A11D.
fuse-1360011423A
knob array-04610578

The convergence is way off. You may be able to adjust it thru a service mode menu. You'd need to get the model number first.
How old is the set?

Thanks,

SF in Vermont

Hi Pswglaw,

From the way you describe the problem, it seems you have a high voltage leak. To check this, make the room dark and look into the back of the TV while turning it on. If you see something like lighting jumping around you have this high voltage problem. The TV will eventually destroy itself under this condition. I would suggest not using it until you get it repaired. The repair cost will be much lower if the TV is still working when you take it in. The high voltage leak will destroy more parts and cause the TV to stop working. Then it will blow a fuse.

MyTvGuy

It's a Zenith remote, MBR 3440 is the model #, 124-202-01 is the part #. To program, press and hold PRG button until red light stays on, press TV,AUX etc, enter 3 digit code (www.xdiv.com) press Enter.

Go thru each menu selection--look for the word for language
In Spanish = lengua ? French = ?? Cycle thru choices------
Consult owners manual ?........T.

picture tube need a picture tube reguvinator $1300