Question about Ingersoll Rand 271 Super Duty 1 Inch Pnuematic Impact Wrench

3 Answers

Detent worn out?

I have an Ingersoll Rand 1/2" drive impact wrench. I probably bought it in 1960 or so. It says "size 405, model A, sn.7329" It has given me years of service but the detent that holds the switch from F to R has gotten worn, so it often gets knocked into the wrong direction. Is this something you can fix, or I can fix with some help and the right parts. Except for this problem it still works great.
Thanks for any help you can provide,
Tony McCauley

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,596 Answers

Yes iy is The Detent But Unfortunatualy parts Are Probably Unavalable I have been there you may be able to come up with something If its a simple Ball or Pin & Spring setup its Repairable. That Unit is 2 yrs Older Than I am . I Would Break it down and see What Type setup it is as some are in the Switch and others are In Body . I realy hope This helps a Little it sounds like an old friend your tryin to save and 30 yrs of wrenchin I know the Feeling. Good Luck, RejakWilson

Posted on Jan 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,183 Answers

Hi,
getting original parts for the same , would be difficut job. The only option is to mix and match a solution for the same . You can try the followig webiste in case they have the required parts

http://tinyurl.com/bj2dup


Thanks
proton

Posted on Jan 29, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 124 Answers

Im sorry they dont make replacement for wrenches that i know of just try to jam it with something to hold it in right direction until you can buy another wrench somewhere you may want to try ebay see if someone is selling the wrench or the part hope this helps

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Impact wrench manual


You can download manuals and parts lists from Ingersoll Rand.
Follow this link:
Ingersoll Rand Industrial Technologies On line Publications

Feb 23, 2014 | Ingersoll Rand Air Impact Wrench 1in Dr...

1 Answer

My 3/4" ingersoll rand impact has little power how do i fix?


A very common problem with most impacts is the incorrect size of the air fittings and air hoses, follow the MFG'S suggestion located in the owner's manual. Most 3/4" impacts need a 1/2" i.d. hose with 1/2" series air couplers. All I.R. impacts have a screen on the inlet bushing that can become clogged with debris and will cause a low power condition, make sure it is clean. If the problem persists disassembly and inspection of the tool will be necessary. Most common problems are damaged / worn motor vanes, bearings, gaskets, seals, scarred endplates. Special note for IR261 the endplates along the edge have small plugs that can deteriorate cause an internal air leak causing low performance.
Follow this link to find the parts list for you model:
http://manualarchive.ingersollrandproducts.com/

Apr 19, 2012 | Ingersoll Rand Air Impact Wrenches

2 Answers

Diagram of parts


you can download ingersoll rand tool manuals and parts lists from

www.irtechpubs.com

Jan 22, 2012 | Ingersoll Rand 1/2" Super Duty Air Impact...

1 Answer

What the maximum working torque for a Ingersoll Rand 1/2 2705P1?


Ingersoll Rand 2705P1 1/2 inch 40-200 ft lb Industrial Duty Impact Wrench
Max Torque 400 Ft-Lb

Pneumatic Impact Wrench, Industrial Duty
Pistol Grip Style
Standard Anvil
Square Drive Size 1/2 In
Torque Range 40-200 Ft-Lb
Max Torque 400 Ft-Lb
Average CFM @ 15 Second Run Time 4.2
CFM @ Full Load 23
Max Bolt Capacity 5/8 In
Free Speed 8500 RPM
Pin Retainer Type
Required Pressure 90 PSI
Air Inlet 1/4 In
Min Hose 3/8 In
Overall Length 6 3/4 In
Weight 2.55 Lbs
Country of Origin: USA
CR 4Z942

Mar 28, 2011 | Ingersoll Rand Air Impact Wrenches

1 Answer

My directional control buttons on the gun are sticking


Ingersoll Rand impacts have o-rings that are mounted in the housing or on the valve that are susceptible to swelling and causing the reverse valve to stick!
if you know the model number, follow this link to find the appropriate manual to see the valve set up.
Ingersoll Rand Industrial Technologies On line Publications

Jan 31, 2011 | Ingersoll Rand 1/2" Air Impact Wrench Gun

1 Answer

What is the maximum operating air pressure fir the IR2190DTi-6


Most I.R. impacts are recommended for 90PSI with the exception for the 285B which is 120PSI.
If you need manuals or parts lists follow this link:
Ingersoll Rand Industrial Technologies On line Publications

Jan 12, 2011 | Ingersoll Rand Ingersoll - Rand IR2190DTi...

2 Answers

Need exploded diagram of ingersoll rand Model 8049 electric impact wrench in order to order a planetery gear kit


Here you go... I needed the same...

http://www.powertoolrepairohio.com/pages.php?pageid=14&breakid=1118

Feb 22, 2010 | Ingersoll Air Impact Wrenches

1 Answer

Ingersoll rand 231A 1/2 inch impact wrench no power


if you have already used air tool oil you may have to take it apart and clean the motor vanes

Jan 29, 2010 | Ingersoll Rand 1/2" Super Duty Air Impact...

Not finding what you are looking for?
Ingersoll Rand 271 Super Duty 1 Inch Pnuematic Impact Wrench Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ingersoll Air Impact Wrenches Experts

John Trevino

Level 3 Expert

1378 Answers

yadayada
yadayada

Level 3 Expert

60985 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you an Ingersoll Air Impact Wrench Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...