Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Blank picture, good sound, 5 red blinks?

Picture is on then off then on etc... Sound stays on. 5 blinks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Phillips Universal Remote Control and I'm looking for the code library

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

No picture but the red power button blinks each time it blinks there is a thumping noise from speakers and a clicking sound


try checking the fuse area, together with the capacitor & resistor may one of them is faulty. and also check for any bad soldered.

let me know

Oct 31, 2008 | Haier HTF27R11 27" TV

1 Answer

Sony kv35s66: No picture, just sound and red blinking


This should be a quick fix. Try resoldering the vertical IC. This is a small flat IC attached to a heat sink with about 11 pins. It should be marked LA7837 or something similar. That should resolve the problem.

Keep us posted.
Dan

Sep 08, 2008 | Standard (CRT) Televisions

1 Answer

Standby Blinks 5 times. Picture goes off but sound stays on. Only hookup is Digital Cable - help!


Plug the electricity to a surge protector. I fixed my that way. Try it and let us know.

Jun 28, 2008 | Sony KP-53HS10 TV

1 Answer

KV-36FS10 - No picture or sound Stand By Light blinks


5 Blinks usually means the horozontal circuit has problems and parts need to be replaced. unplug power to reset

Jun 15, 2008 | Sony KV-36FS100 36" TV

1 Answer

Blank screen on startup on Sony KV-32FX20U


All Sony sets will stay blank until the circuit is ready to power the tube. If there is a problem detected inside the set, the tube will remain vlack and the standby light will blink. This blinking will repeat a count as follows: Blink count, pause for a second or two, repeat the blink count, etc. Some Sony sets will play for a while then flash off and on. This is usually an indication that the picture tube is starting to fail. In your case, you should see a blink code. If you can update this with the blink count, I can use that info plus the model number listed above to provide a possible cause and the parts required to repair the set.
Dan

Mar 29, 2008 | Sony KV-32FX20U 32" TV

5 Answers

Sony Trinitron blank tv/no picture


When I turn on the TV I hear the click sound and the TV powers up. Immediatly the red (standby) light begins to flash 6 times on and off. this happenes only in the morning, but after 5:00PM when youturn on the TV as if nothing is wrong.

what is the problem?

Feb 08, 2008 | Sony FD Trinitron WEGA KV-32HS510 32" TV

1 Answer

Sony KV-32FS120 No picture, No sounds, 5 red blinks after turned on


your problem is in power supply section in your tv. if it is ok check for h/output section. call skilled tech to fix it it is not a major problem.

Sep 28, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...