Crib assembly instructions

This will only work with full make and model number. A serial number is just a numerical sequence of manufacture. Most cribs are built to a theme so wee the bottom link.

https://www.google.com/search?q=crib+serial+number+130783203

The assembly instructions might help you.

https://www.google.com/search?q=crib+assembly+instructions

..

Hello, Shanon -

The fact that the crib was given to you without the hardware is a "red flag" to me that something may not be right with the crib, beyond just not having assembly hardware.

I began looking for assembly instructions for your model of crib, hoping the instructions would include images and parts numbers for the missing hardware. I did find instructions for a crib manufactured by C & T International, Model #740 Vick Crib. Is that your model of crib, perhaps? If so, this is the link to the assembly instructions, which can be downloaded (free):
https://www.manualslib.com/manual/769396/CAndt-International-740-Vick-Crib.html#manual
Note: To save and read or print the instructions you will need Adobe Reader software (free.)

See page 4 of the manual for the hardware list giving the bolt lengths and identifying the other hardware.

Thinking the C & T International Model #740 Vick Crib might be the one you have, I tried to find the company's website to determine if the missing parts could be ordered and purchased from the company.

I found this information about a 2010 recall of many cribs manufactured by C & T International/Sorelle:
https://www.cpsc.gov/Recalls/2010/ct-internationalsorelle-recalls-cribs-due-to-strangulation-and-suffocation-hazards
The #740 Vick (Vicki ?) model crib is not listed.

However, if you believe the crib you have was one manufactured by C & T International/Sorelle, I recommend you call the company and ask if it was included in the crib recall. This is the link to the Sorelle Furniture Contact Us page, where you can find the phone number to call (weekday, office hours) and a form which you can complete to send an email:
http://www.sorellefurniture.com/contact-us/

Personal opinion: The fact that there is no hardware with the crib parts makes be think it was a recalled crib model and should not be used as a crib, even if the hardware can be replaced. Instead, a crafty/handy person could use most of the crib parts to create a clever settee, with no moving parts (like a drop down side for a crib.)

Note: If it turns out that your model crib was recalled, the person who gave it to you may not have known about the recall either and thought it was a bargain found at a yard sale.

Best wishes.

Please do not assemble and use this crib. It has been recalled by the manufacturer due to "risk of death by suffocation." Even without the screws or receipt, you should be able to take the crib to a department store or children's store that sells Simplicity brand cribs and exchange it for a similar model.

The US Consumer Products Safety Commission lists this remedy in the recall notice:
"Consumers should immediately stop using the recalled cribs and find an alternative, safe sleeping environment for their baby. Consumers should immediately return the crib to the place of purchase for a refund, replacement or store credit."

Please read this recall notice by the US Consumer Products Safety Commission for details:
http://www.cpsc.gov/cpscpub/prerel/prhtml09/09260.html

The good news is that when you exchange it, the new crib will have all the screws and instructions you need!

Million Dollar Baby (MDB) is the manufacturer of DaVinci cribs. Contact them for instructions. Please use them for putting the crib together. If this is a drop sided crib, please note that it has been recalled and you should not use it without the immobilizer kit installed on it. MDB can help you with that as well. The drop side can very easily be mis-installed which can lead to deadly consequeses, so it is important that you check your crib now, make sure all the parts are there and nothing is damaged, then follow the instructions carefully when assemblying it and then using the immobilizer kit that MDB should provide you with regard to the recall.
http://www.cpsc.gov/cpscpub/prerel/prhtml10/10277.html

To get assembly instructions go to;
http://www.childcraftindustries.com/childcraft/assistance/

and enter your crib model number. The number you gave does not look correct.



Information from Child Craft Industries

MODEL NUMBER VERIFICATION:
Crib model numbers are stamped directly on the crib in black ink on the underneath bottom edge of one of the crib sides, headboard, footboard or stamped on the label attached to the inside face of footboard bottom rail.

On other Child Craft and/or Legacy furniture the model number will be stamped in black ink on the back panel.

Often "47167" and "01700291" are mistaken for model numbers. These numbers are NOT valid model numbers.

You can email them - they emailed me the instructions and parts list in a 16 page pdf.
[email protected]


Here are the instructions for your crib. Please review them and see which parts you will need. We accept Visa or Master Card. Parts are non returnable. Delivery is normally 7-10 business days. We do have replacement parts for this crib. Please review the instructions and see what you will need. J Thank you, Cindy Customer Service Rep Simmons Juvenile Furniture ':Phone: 1-800-218-2741 ':Phone: 1-920-779-4004 7:Fax: 1-920-779-4216

You could go at:

www.evenflo.com

Have you tried this website: http://www.simmonskids.com/consumer_service.cfm

simply screw the metal hinges facing up and snap them into place

I have some basic instructions for cribs in general, I hope it helps.
http://www.babeetenda.com/cribinst.htm
Of coarse there may be slight differences. If you listed the brand, I could see if there are proper instructions for it.