Question about Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

KODAK 5100 AIO Printer, won't print.

Printer will not print a photo, paper comes out blank.
Cannot install software.
I get these errors....Microsoft. Net Framework 2.0
(Error Ox80131700)
Application failed to initialize properly.
(OxcOOOO135)
E.S.S. failed to install.
(2753x17x1956089094x).
I hope this is something simple, I am a novice when on the computer.
When you answer this please remember I won't be able to print it.
That might be a problem.
Thanks **** Handrahan

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 59 Answers

I am not an expert with Kodak but you can go to their website and download all the software you need - It will do it for you. They also have a step by step solution and repair. Hope this helps you.

http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=10/7895&pq-locale=en_US

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My calibration page printed on plain white text paper


When you calibrate the 5100 AIO, first, you push in the photo paper drawer until it CLICKS. Next, print an alignment sheet. It will use the photo paper. Pull the drawer out, put the printed sheet in the scanner bed, with the arrow in the right hand corner, closest to you. Press start and it will scan and print a sheet on full sized paper.
If your initial scan doesn't print onto photo paper, you don't have the drawer pushed in the whole way. There is a definite click and the green light will turn on.

May 14, 2011 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

The printer works OK but it prints two lines clearly but every third is feint almost half the writing is ommitted


Set the print quality to normal or best.
Clean the printhead
Run a calibration.
The Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However, you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads and performs a nozzle health check to enable high-quality prints.
1 Load the main tray or photo tray with photo paper.
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly recommended for calibrations.
2 Press and hold Photo and Cancel together to make a calibration print.
3 Follow the instructions on the calibration print to calibrate the printer.

Feb 11, 2011 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Koadak easy share all in one, won't print in bacl


Check the version of AiO software you are using. We had to re-install the Aio Kodak software yesterday because the print que did not register when I changed the ink cartridges. The AiO would scan, but the computer side still thought it was out of ink.

Perhaps the latest software will fix your problem too.

Juliasew

Jan 30, 2010 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

When printing out photos they come with excess ink on them


update the kodak aio home center software on ur computer. open printer accesss door and take out both ink cartridges and then remove printhead. go to www.kodak.com/go/printheadsupport on how to take out and install printhead again. install both ink cartridges . open home center,click on ? @ top right hans side .after clicking on question mark choose maintenance and then choose clean printhead. issue will be resolved. contact kodak@ 1800 421 6699 if u have same problem

Jul 25, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Kodak 5100 AiO When printing emails the borders


Read through some of the solutions on here and eventually removed print heads and cleaned them and printing of borders and words is now fine. Still have probs with photos being discoloured .

Apr 12, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Not printing microsoft office documents, VIsta Software


Try to press the photo and copy at the same time it will print a diagnostic page
look how is the quality of the text.
if it prints very light or if it doesnt print open the access door and try to remove the ink cartridges and put it back again and make sure you hear a click sound after you put the cartridges back in and close the printer access door
try to print again a demo page press photo and copy and check if there is improvement
if no improvement open the kodak aio home center software click on the question mark(?) on the upper right corner and click on maintenance..then select printhead cleaning.After the printhead cleaning print again demo page (press photo and copy at the same time) if still no improvement on the quality of the text call the kodak hotline 1 800 421 6699..you might need a printhead replacement..

Nov 16, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Cannot find a default setting for scanner


by chance, is that printer plugged into a power strip? that can make a scanner NOT work.

http://tinyurl.com/6qcpgy

Jul 21, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Easyshare 5100 not printing on correct side of paper


Load a single 8x10 page and press Copy + Cancel until the printer feeds the paper. It will spit it out blank. Try printing another photo. Make sure Kodak logo faces up when you load it

Jul 12, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

Kodak 5100 only prints half the page


My Kodak Easy Share 500 decided to only print 1/2 the photo today.  For over 1 year it has worked just fine.  Any ideas?

Apr 28, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

9 Answers

Will not scan kodak easyshare 5100


Go to Control Panel
Double Click on Printers and Other Hardware
Double Click on Scanners and Cameras
Double Click on Kodak 5100 AiO
Click Next
Read and follow directions
It ain't rocket science

Feb 08, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5100 All-In-One Printer Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...