Question about Emerson MW8775W Microwave Oven
Test the high voltage capacitor,
the rectifier diode.or the magnetron. If all this are fine, test the control board.
If it additionally does not spin and no light, then check also the door switch and fuse.
The diode and capacitors can br tested. The capacitor must be allowed discharge before testing, or you risk to get electrocuted, even if power is off. Capacitors can get discharged by shorting their two contacts.
Replace the magnetron if the checks and all of the high voltage component tests are good, but the unit still does not heat.
All locations, and description of this parts can be located using the diagram here: Counter top.
Parts must be tested to find out what is wrong.
Remember that microwaves are potentially dangerous devices if not repaired properly, the job must be done by a competent person.
A microwave energy leakage test must always be performed when the oven is serviced for any reason.
Regarding parts, contact the seller here to purchase parts. (here in UK).
Posted on Apr 27, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 29, 2014 | Sharp Microwave Ovens
Apr 15, 2012 | Sharp Microwave Ovens
Oct 07, 2009 | Sharp R-1870 Convection/Microwave Oven
Jan 08, 2009 | Sharp Microwave Ovens
Jan 02, 2009 | Amana ACO1520A Microwave Oven
Sep 22, 2008 | Sharp R-1610 Microwave Oven
Sep 22, 2008 | Microwave Ovens
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: