Question about Samsung DLP HL-P4663W 46" Rear Projection HDTV-Ready Television

1 Answer

Samsung tv turns of by itself

My TV runs for 10 minutes and turn off by itself. I than turn it on again and it will turn of again in couple of minutes and it goes on and on like that. Please advice, how I can fix it. Some on suggested that may be the lamp needs to be replaced. Please let me know, how shall I proceed about fixing the problem.

Thank you, Manny Desai

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 42 Answers

The lamp can cause this but also a faulty lamp door switch will cause the same thing

Make shure that when you replace the lamp
the lamp door switch is in the up position before the door is put back on

Posted on Feb 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV will not turn on. Lamp indicator light blinks


Replace Lamp (L3) # BP96-00826A (L6 )BP96-01073A Call Mats Electronics $99.95
1-800-628-1118

Dec 30, 2009 | Samsung HL-R4266W 42" HDTV-Ready...

1 Answer

Samsung HLS4226 DLP television turns off periodically


It is the lamp, go to bestbuy.com and at the bottom look for orderparts. this is a third part vendor that has many aftermarket parts to replace manufacturers. They might have a replacement bulb in there for you. They usually run $250 or so but vary per manufacturer

Jul 26, 2009 | Samsung Televison & Video

1 Answer

When turning on the TV, I hear a banging/grinding sound.


Hi,

If you hear a grinding,whirling,spining or buzzing sound, that sounds to me like the COLOR WHEEL,the reason for that is because your color wheel spins at 5,000 rpms(revolution per minute) and something that modifies the balance of the disc can cause different things,Unfortionatelly the only way to check that the color wheel is working properlyis you need to check it out physically

I did some research and I found the color wheel at DM;http://www.discount-merchant.com/Samsung-Replacement-Color-Wheel-HLS-HLT-Series-p/samsungcolor_wheel_bp96-01579a.htm?CLICK=52978

Please keep us posted.

Jun 14, 2009 | Samsung HL-S5087W DLP TV

1 Answer

TV shuts itself off after a couple minutes of being on.


One must be very careful of the quality of the replacement lamp. Many of the cheap 'deals' on the web for replacement lamps are substandard. I always recommend that replacement bulbs be the original manufacturers bulb.

Apr 30, 2009 | Mitsubishi WD-73827 73" HDTV DLP TV

2 Answers

Samsung DLP 62 inch turns off by itself after being switched on


take off the lamp access door on the back and find the safety switch that the door pushes on. unplug the connector from the switch and put staple into the connector to short out the cable. Switch is probably bad. worked for me. same problem.

Apr 07, 2009 | Samsung 61" Slim-Depth DLP HDTV

1 Answer

T.V. TURNING OFF AFTER ABOUT 5 MINUTES.


Go to Samsung.com for solution. There is a switch that just needs to be repositioned behind access door on rear. Fixed my HL-S5086W ok.

Feb 13, 2008 | Samsung HL-S5086W 50" HDTV

1 Answer

Shutting off and on...


the problem may be due to dry soldering in the power supply stage if it was with the lamp there would be red or green light showing the presence of the power to the tv after making it own some of the components get hot and it will make the the soldering point conectionless and after some time the heat sink get cooled and the soldering point gets connected and u will see the picture again it is a simple problem if u have a soldering iron u make it hot and re solder all the components in the first part of the circuit board and the problem if rectified

Jul 03, 2007 | LG RU52SZ30 52" Television

Not finding what you are looking for?
Samsung DLP HL-P4663W 46" Rear Projection HDTV-Ready Television Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69807 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...