Question about Minolta magicolor 2350 Laser Printer

2 Answers

Magicolour 2350 I've replaced the magenta cartridge and the opc drum. Now when prinitng from Indesign/illustrator/pshop the printer doesn't print the magenta in any tiff or eps files but will print magenta from text just tiffs and eps files its not printing. any ideas? thanks

Posted by on

2 Answers

Re: Magicolour 2350

Please send nearst service station (address and phone number) in mumbai.

thanking you!!

Coustome of magicolour 2430 Dl konica minton

our e-mail id is

Posted on Jan 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Minolta Master
  • 691 Answers
Re: Magicolour 2350

Try updating the drivers for the printer from the manufacturers web site. I doubt the issue is related to the printer itself, otherwise it would fail to print magenta all the time.

Posted on Aug 11, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I'm having a problem with the ink magenta on an IP4500 Canon Printer, it's not printing any magenta even with new cartridges and I've done all the maintenance checks!! Help!

there are small metal spring contacts between the cartridge holder and the cartridge itself, these send the signals to the print head via the cartridge holder. Over time, as a print cartridge moves from side to side during printing these flatten out and no longer come into contact with the cartridge. Find the contacts behind your magenta colour cartridge and re-tension the spring metal contacts so they once again contact the metal faces on the cartridge. They maybe hard to find as they will be in the place where the cartridge goes, use the flat copper faces on the cartridge to give you a clue as to the position of the contacts in the holder.

Apr 16, 2012 | Canon iP4500 Photo Printer

1 Answer

When I print using my cannon LBP 5000, I get red and yellow lines down the page. I have used the cleaning option on print but it has not corrected the problem

Hello,If they are vertical lines then the most common reason for this is that containers for the waste toner of the magenta and yellow cartridges are full. This is not a common problem if you use original HP cartridges, but if you use compatible or refilled cartridges it happens. If you get the magenta and yellow cartridge out and look at the the green OPC drum you would see these 2 lines. You can carefully shake the cartridges 5-6 time HORIZONTALLY and the problem will probably disappear for a couple of pages. If this happens then you must replace the magenta and the yellow cartridges. Post back results here. Hope this helps

Sep 14, 2011 | Canon Printers & Copiers

2 Answers

MY HP LaserJet 2840 has a brand new Toner cartridge. Now it won't print at all and we are getting a "OPC at end of life" prompt. What does this mean?

Imaging drum reach 20,000 (black only) or 5,000 (color), replace the image drum.

Supplies life
The life of the imaging drum depends on the number of black-only or color pages that print jobs
require. Imaging-drum life is also affected each time the device calibrates because calibrating causes the imaging drum to rotate. Imaging-drum life is measured in terms of number of rotations rather than number of pages printed.
The type and length of print jobs also affects drum life. A series of short print jobs uses more drum
life than an equivalent number of pages printed in a single large job. To extend drum life, print
multiple copies of a print job at one time rather than sending the same job to the device multiple times.
The life of a print cartridge depends on the amount of toner that print jobs require. When printing text at 5% coverage, black print cartridges last an average of 5,000 pages and cyan, magenta, and
yellow print cartridges last an average of 2,000 pages. High-capacity cyan, magenta, and yellow print cartridges last an average of 4,000 pages. (A typical business letter has 5% coverage.)

Aug 18, 2011 | HP LaserJet 2840 Printer

1 Answer

Dell mfp 1815dn is printing a "shadow" of the words I just printed. It's almost like there is still toner on the roller and then it prints it again. Not sure what is happening. Do I need a...

That effect is called ghosting, and yes, toner is sticking on the drum and is being re-printed. There are two drums it could do this on, one would be the OPC drum (which is part of the print cartridge). and the other possible one is on the fuser. If I were you I would first try a new print cartridge (part# 310-7945) which is most likely. If that doesn't fix it then try replacing the fuser (part# UG297). Also, make sure you use a dell print cartridge becuase a generic one could cause this to happen. has both these genuine items in stock and can ship same day until 7pm est.
If you decide it is the fuser, here is a video to replace that

May 18, 2011 | Dell 1815dn All-In-One Laser Printer

1 Answer

12A cartridge after refilling is printing ghost print repeating ...plz how to rectify problem.. what is the problem....

replace cartriage then you can identify the problem is in printer or cartriage if the problem is in printer the problem creater is teflon sleeve. In other case the problem is of opc drum Change the cartriage opc drum then check

Jan 01, 2011 | HP LaserJet 1010 Printer

3 Answers

Black smudges down left side of page

How do I clean white or black spots on printed documents? Description: First make 10 to 15 copies of a blank, white sheet of paper.
If you still see the spots on printed documents after making multiple copies, clean the drum unit as follows:

  1. Remove the drum unit and toner cartridge assembly, and then remove the toner cartridge from the drum unit.
  2. Position the print sample in front of the drum unit so you will know the exact position on the drum that is causing the poor print.
  3. all-ug-19.gif
  4. Turn the black gear on the drum as you check the surface of the OPC drum.
    The OPC drum is photosensitive so do not touch it with your fingers.
  5. all-ug-20.gif
  6. When you find the substance on the drum surface that matches the print sample, gently dab the surface of the OPC drum with a cotton swab that is lightly dampened with isopropyl alcohol.
  7. Note
      • Do not use a scrubbing or wiping motion because this might damage the drum.
      • Do not try to clean the surface of the OPC drum with a sharp object, such as a ball-point pen, because this might cause permanent damage to the drum unit.
  8. If the print quality still has not improved you need to install a new drum.

Dec 02, 2010 | Samsung ML 2010 Laser Printer

2 Answers

Black lines on printing

Replace the toner cartridge.

Mar 03, 2009 | HP LaserJet 6p Printer

1 Answer

Konica minolta opc drum magicolor 2350 printing problems I have replaced the opc drum on magicolor 2350 and also the black (k) ink cartridge and now can only really print in yellow, sometimes the other...

When you print stop the printer half way through then check the image on the opc drum and transfer belt to see if it's complete or not, also you may want to check the aidc sensor (sometimes the cable comes loose). I can e mail you the 2300 series service manual (4.17mb) if you reply with your e mail address

Jun 15, 2008 | Minolta Printers & Copiers

Not finding what you are looking for?
Minolta magicolor 2350 Laser Printer Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5693 Answers


Level 3 Expert

469 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

Are you a Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides