Question about i-mate JAMin Smartphone

1 Answer

No sound, no outgoing call jamin imate

No incoming ring tone.all possible activation done. outgoing call is received but no voice. no sound on screen tap or any other setting. was working ok till now uses 2gb memory storage card virus?

Posted by on

  • yatrikwines Apr 17, 2009

    exactly the same problem all the sudden speaker has stopped working, but works through headphone piece?, so new speaker perhaps?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I dissambled my iMate JAMin and found that one of the wires for the speaker had been broken, they seem to be pretty weak - resoldered the wire now speaker works fine.

Posted on Apr 25, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A180 just showing base and no response


Is the ringer turned off? Or is the volume on the ring tone set too low? Another possibility is that the phone isn't set to receive incoming calls - the Siemens phones I've owned allowed one to specify which handsets could handle incoming calls and outgoing calls on each line.

Jun 01, 2014 | Siemens Lands Phones

3 Answers

PHONE DOES NOT RING


Hi,

This might be due to the settings....

Ringer settings
To change the ring type and ring tone
1.
On the Phone screen, tap Menu > Options > Phone tab.
2. In the Ring type list, choose whether to be notified of incoming calls by a ring, a vibration, or a combination of both.
3. In the Ring tone list, tap the sound you want to use

You can find more information at the manual located at the below location.

http://www.htc.com/support/pdf/htctouchdual/NIKE_HTC_English_Manual_16-KEY.pdf

Refer the pages 33 & 83

I hope it will resolve your problem...

With Regards,

TPV

Feb 03, 2008 | HTC TYTN GSM Phone

1 Answer

What is answer mode?


The answer mode determines whether the HP Fax answers incoming calls or not.

Different answer modes are :

* Fax

The HP Fax will automatically answer all incoming calls using the Rings to Answer setting. This is the default setting.

* FaxTel (unit with handset model only)

The HP Fax automatically answers all incoming calls using the Rings to Answer setting. If the call is a fax call, the HP Fax will receive the fax. If the call is a voice call, the HP Fax will create a special ring to indicate it is a voice call. The incoming voice call will need to be answered using the attached handset.

NOTE: If the HP Fax determines the call is a voice call, only the HP Fax will ring with the special ring tone. The other phones on the same phone line will not ring at all. You will not be able to pick up the voice call using the other phones.

* Tel

The HP Fax will not automatically answer calls. Faxes will need to be received manually.

* AnswerMachine

The HP Fax will monitor the line when an incoming call is answered by a person or by the answering machine. If the HP Fax detects fax tones on the line, it will receive the fax.

Jun 07, 2010 | HP Officejet 4315v All-In-One InkJet...

1 Answer

I9+ phone will not receive incoming calls


check and make sure you ringer is set to something but silent.

Jun 04, 2009 | Cell Phones

1 Answer

RIM Blackberry Pearl Can't hear incoming/outgoing calls


After receiving a message with sound, push the button on the side that activates voice dialing. It sometimes takes activating it twice, but it will turn the sound back on.

Mar 05, 2009 | RIM BlackBerry Pearl 8100

1 Answer

Imate- jama


just go to connections-beam- & click on recieve all incomming beams. thats it

Feb 27, 2009 | i-mate JAM Pocket PC

1 Answer

Not responding in Incoming & outgoing


MY HTC PHONE NOT RECEIVING INCOMING CALLS SOME TIMES I HAVE AIR-TEL SIM CARD FROM (ANDHRAPRADESH)

Jul 07, 2008 | HTC Touch P3450 Smartphone

2 Answers

Samsung E900


Sound settings Use this menu to customise various sound settings.
Incoming call
Use this menu to select a volume level and alert type
for incoming calls.
Alert type: specify how you are to be informed of
incoming calls.
Ring tone: select a ringtone for the call ringer.
Volume: select a ringer volume.
Keypad tone
Use this menu to select the tone that the phone
sounds when you press a key.
Message tone
Use this menu to set up the ringtone for incoming
messages.
Menu functions
Tone: select one of several message tones.
Alert type: specify how you are informed when a
message comes in.
Repetition: specify how often the phone informs
you of a new message.
Power-on/off tone
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Slide tone
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Silent mode
Use this menu to set how the phone acts to alert you
to a specific event in Silent mode.
Extra tones
Use this menu to customise additional tones for the
phone.
Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
Connection tone: set the phone to beep when an
outgoing call is connected to the system.
Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
Indicative tone: set the phone to beep when a
pop-up window displays.

Apr 28, 2008 | Samsung SGH-E900 Cellular Phone

2 Answers

No voice during calls both incoming and outgoing


Have the audio jack repaired it's not making contact on the connecting plates properly. You ould have a go at this if you are very good with fine electronics

Nov 26, 2006 | i-mate PDA2k Pocket PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top i-mate Computers & Internet Experts

Bilal Ahmed Qureshi

Level 2 Expert

195 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18354 Answers

castletech
castletech

Level 3 Expert

364 Answers

Are you an i-mate Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...