Question about Intel 845GE Motherboard

1 Answer

Cerfer, I bought a replacement motherboard for emachines 2095. The replacement part didn't have the fan harness bracket onboard, like the one I'm replacing has. They say you can pop the bracket pins out of hthe motherboard, but I've tried and get nowhere.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

I am assuming that you are talking about the fan for the cpu (computer processing unit)? If yes, and if it is an intel fan it should come out with you twisting the pins (counter clockwise i think, there should be arrows show what way to turn.) After you have twisted them just pull them up and it should come out nicely. If you were not talking about the cpu fan please clarify what fan you are talking about.

Have a great day

Posted on Jan 28, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

When i turned on my emachines w3611 there was three beeps and then the monitor shut off. what do i look at first in order to repair it ?

The problem is in the graphics card. If the monitor connects to the onboard video circuits, them you'll need to replace the motherboard.

Jan 01, 2016 | eMachines Computers & Internet

1 Answer

Ppowers upbutnovideo or beeps?

Space bar faulty as well?

Open the case and remove the video card and reseat it. If that doesn't work, you need a new video card.

The motherboard doesn't beep for standalone video cards. If the motherboard has onboard video you can try and getting into the bios by tapping F2, F10, or Delete at boot up. If the onboard VGA video works, you can select onboard video until you can replace the video card.

Nov 18, 2015 | eMachines T3092 Motherboard Battery

1 Answer

I bought a new case fan to replace an HP Compaq DC5100 Case Fan. The problem is the fan I bought has a 4-pin molex connector which I didn't find in my computer. Is there a converter from the 4-pi

You will find 3-pin to Molex only as the 4th pin is for control which older Molex does not support. You bought the wrong model fan for your motherboard. You might consider rewiring it with the old connector. See e.g. which provides wiring logic.

Jan 09, 2013 | Computers & Internet

1 Answer

880GM-E43. Worked without a problem for around 2 weeks. All of a sudden it will not power on, no indicator light on the motherboard. Replaced the PSU thinking that it was the problem, didn't...

I'd have to agree; bad power regulator on the motherboard.
The board is getting some power (3-5v) since the CPU fans move, but it's not getting the 12v it needs to power the processor, RAM, etc. (No onboard power LED). Sorry for the bad news!

Jun 29, 2011 | MSI 880GME43 Motherboard

1 Answer

Fan Speed 100% on Intel D845GVSR motherboard

see if you plug them in the right spot cpu gose by the cpu case fan will say case on board some take two wire fans some 4 wire some 3 wire jim

Feb 20, 2010 | Intel D845GVSR Motherboard

1 Answer

E210882 is the number on the motherboard on my Emachine computer. i'm trying to disable the onboard video card with a jumpper setting so it will reconize a older but working pci 3dfx monster 3d card I put...

You can disable the onboard by visiting your bios.

On boot it will tell you to press del f8 f2 etc to enter the setup from there you can navigate around to disable the onboard and choose the lane your older pci card is in.

Oct 11, 2009 | Dell (E210882) Motherboard

1 Answer

Onboard VGA port disabled, in Vista

You should try to disable it in the hardware list.

E-machines have an odd bios where not all the functions of the motherboard are available to the user.

If you can find the make and model of your board there is a good chance you can find the PROPER bios for it.

Emachines use motherboards from a variety of regular motherboard suppliers

My older e-machine has a hacked bios so that I can alter ALL the settings.

Aug 24, 2009 | eMachines EL1210-11 PC Desktop

1 Answer

Emachine T3624 NIC Problem

Shut the computer off at the beginning of the bootup process look for the function key or keyboard button to get into the bios setup. Press that button and look in the settings to disable the onboard network adaptor.

Nov 27, 2008 | E-Machines EMA IMPERIAL GV (845GV) TG3...

1 Answer

My pc doesn't boot up

Did you have onboard video before? What is the video card? AGP8x, AGP4x, PCIe? If you had onboard video, you'll need to change the settings in the BIOS and disable the onboard video. You'll have to plug in at the onboard to access the BIOS.

Jul 23, 2007 | EliteGroup P4VMM2 Motherboard

Not finding what you are looking for?
Intel 845GE Motherboard Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts


Level 3 Expert

2600 Answers

Alun Cox

Level 3 Expert

2678 Answers


Level 3 Expert

781 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides