Question about Hotpoint WMA54 Front Load Washer
Switch off. Try some WD40 on the machine lock (not on door) and open & close door many times, to ease out the lock.
Posted on Mar 25, 2009
sound like the contact points on the timer are probebly dirty or arched to where they are not making good contact. you can take and clean them with a piece of emery cloth if you are mechanically inclined and can take the timer apart. Also there's a set of contacts down by the motor ti check too.
Posted on Jan 06, 2009
If you spin the drum by hand, and it is niosy and rumbling then the main drum bearings have failed.
If under 5 years old, then you should be able to get it repaired under Hotpoint 5 year guarantee, You just pay for labour and call out, cheapest option, it is not really a D.I.Y job, as it is quite involved, and entails a lot of work.
Please rate my advice.
Posted on May 27, 2009
Remove lower rear cover of washer, locate and remove large black hose fastened to drum, inside you will find the filter.
Please rate my solution.
Posted on Sep 22, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 05, 2016 | Washing Machines
Feb 03, 2011 | GE WSXH208A Front Load Washer
Dec 05, 2010 | Washing Machines
Oct 26, 2009 | Hotpoint WMA31 Front Load Washer
Oct 25, 2009 | Whirlpool Washing Machines
Aug 03, 2009 | Washing Machines
Feb 01, 2009 | Whirlpool AWZ410 Front Load Washer/Dryer
561 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: