Question about Samsung RM255LASH Side by Side Refrigerator

1 Answer

How do you reset the change filter light , have replaced filter

I have replaced filter but how do you reset change filter light?

Thank you

Posted by on

  • bmbradshaw Mar 08, 2009

    Have replaced the filter. The light is still red.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Question:
I have replaced filter but how do you reset change filter light?
Have replaced the filter. The light is still red. Answer: After changing the water filter, press Cubed and Crushed buttons simultaneously and hold 3 seconds.

Posted on Apr 09, 2009

  • shugster6 Oct 23, 2010

    been trying to find manual for ages this info was spot on thanks very much red light was like rag to bull top man thanks again hugh

  • linda Jul 27, 2013

    press cubed/crushed AND the filter rest button simultaneously. goes to good/green.

×

2 Suggested Answers

  • 53 Answers

SOURCE: reset change filter light

Push the button in, that you will see, when you open your refrigerator door, hold it for about 10 sec. then let it go, it will turn green, If the light comes on, an says you need a new filter. That is not always true. do the same thing befor buying a new filter, to make sure you need a new filter.

Posted on Jul 03, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After replacing filter, how long before filter light goes off?


Filter indicator : The filter Indicator will be Red when you have used your water filter for 6 months, Reset the indicator (it will be Blue) after replacing the filter by holding the "Alarm/Hold 3 sec for Filter Reset" button for 3 seconds.

The above is how to reset the indicator

Jan 22, 2016 | Samsung RF4267HARS 27 cu.ft. French Door...

1 Answer

How do I reset the water filter ?


You must reset the filter's timer/counter for the "Change Filter" indicator. This varies by brand and model, but involves pressing one (or more) buttons to reset the indicator. The owner's manual should provide this detail.

Sep 12, 2014 | Refrigerators

1 Answer

SRS580DW Water filter indicator red light is on. Where in the fridge do I find it to take it out to replace pleace?


Resetting the water filter indicator light can also be found in the user manual for your SRS580DW Refrigerator User Manual page 8 The water filter indicator initially lights up green. Press the ICE TIMER and ICE MODE buttons at the same time for about three seconds to reset the water filter installation date. • The green light changes to orange after five months to indicate that you should soon change the water filter. It changes to red after an additional one month (six months after the water filter was changed or installed) to indicate that you must change the water filter. • If you wish to turn off the filter indicator lamp or the filter is not connected, press the ice timer & ice mode button simultaneously for 5 seconds. If you wish to turn on the filter indicator lamp again, press the ice timer & ice mode button simultaneously for 3 seconds. Click Here for the SRS580DW User Manual I am here should you have questions Thanks Sea Breeze

Jun 03, 2013 | Refrigerators

1 Answer

How do i reset the water filter alarm light after replacing the filter?


Hello, Thank You for using FixYa. I will be helping you today.Hold the light and lock buttons together untill light resets;
Thank You and please ACCEPT my answer and Rate my answer if it was helpful..

Jul 02, 2011 | Maytag Refrigerators

1 Answer

The control panel does not seem to work on the door. None of the switches work, ice,water, options, alarm. The change filter sign on the main display is highlighted. I tried turning the refrigerator...


Yes the filter needs to be changed after the change filter light is indicated.After changing the filter the unit has to be reseted.The reset procedure is as follows:--- press and hold the Water Filter Reset button for 5 seconds. Newer models: press the Options button until "filter change" is selected, press selection buttons +/- until the "filter change" display goes out.-------------------- Thank you.

Jan 31, 2011 | Siemens KA62DV50GB Side by Side...

1 Answer

I have a refrigerator of Whirpool type 20RU-Dsybol and the symbol of the antibactreial filter (green) flashing what does this mean


Hi!!
The filter status light will help you know when to change your water filter. The light will flash and change from green to yellow. This tells you that it is almost time to change the filter. It is recommended that you replace the filter when the status light changes to red OR water flow to your water dispenser or ice maker decreases noticeably. After changing the filter, reset the filter status light by pressing the button. The status light will change from red to green when the system is reset.
1. Press the eject button to release the filter from the base grille. 2. Pull the filter straight out. 3. Turn the cap counterclockwise to remove it from the filter. IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter. 4. Align the ridge on the cap with the arrow on the new filter and turn the cap until it snaps into place. NOTE: You can run the dispenser without a filter. Your water will not be filtered. Simply insert the cap all of the way into the base grille and rotate the cap until it is firmly in place. 5. Remove the protective covers from the O-rings. Be sure the O-rings are still in place after the covers are removed. 6. Push the filter into the base grille. The eject button will pop back out when the filter is fully engaged.
Good Luck!!
A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Nov 03, 2010 | Whirlpool GC5SHEXNS Side by Side...

1 Answer

V5 filter replace - how to reset red flashing light?


Hello,

So after you have replaced the V5 Cell Filter in the IQ Air, here are the steps you'll need to follow in order to reset the filter indicators:

  • At the main menu on the control panel, push the menu button 7 times until you get to the screen that says Replace Filter.
  • At the Replace Filter screen, press and hold the Enter Key until the cursor appears, and is flashing.
  • Press the UP arrow button on the keypad until you get to the V5 Cell Filter.
  • At the V5 Cell Filter screen press the Enter Key to confirm your filter reset selection. This will turn the corresponding filter LED to a flashing red light. IQAir requires that your reconfirm the filter selection to prevent inadvertently resetting the wrong filter. If you chose the wrong filter, press the menu key after pressing the enter the first time to disregard the filter change command.
  • To confirm the filter reset selection, press enter a second time, which will reset the filter life, and reset the filter hours.
You can repeat these instructions for the other two filters on your machine when it's time. Here's a link to the product manual for your IQ Air Health Pro Plus which will give you the same instructions, as well as other maintenance instructions.

http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/IQAir-healthpro-plus-owners-manual.pdf

I hope that this information was helpful to you. If you were able to reset your filter, please be kind and rate the repair as helpful by clicking the thumbs up icons in the top of my repair. This is what really keeps Fixya experts continue leaving free repair solutions. Thank you very much,

Chris J.
GoVacuum

Apr 08, 2010 | IQAir HealthPro Plus Air Purifier

1 Answer

Change filter light


Water Filter Status Indicator
Light (select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.
Sea Breeze

Nov 25, 2009 | Maytag MSD2650H Side by Side Refrigerator

1 Answer

Need to reset filter change indicator


Hello joe ducks
Welcome to fixya,

After changing the filter reset the status light by pressing and holding the FILTER button for three seconds. The status light will change from replace to good when the system is reset!
Let me know the model number and age of your appliance if you have any more questions.
Happy to help !

Please remember to enter a solved rating before you leave us!



Thank You, Huuum

Sep 30, 2008 | Maytag Refrigerators

1 Answer

Resetting the change filter indicator


Turn off the unit
Open the filter cover
On the top right corner, there is a small hole
Push a paper clip into this and the change filter light will stop blinking.

Hope this helps!

Nov 04, 2007 | Neoair Plus Air Purifier

Not finding what you are looking for?
Samsung RM255LASH Side by Side Refrigerator Logo

2,421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Samsung Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...