Question about Sun 2GB PCI Single FC-AL Host Adapter (p/n X6767A/SG-XPCI1FC-QF2) Storage Controller

1 Answer

Need to find out to what Qlogic model is this SUN OEM HBA =2

HEllo

I have been trying to determine the compatible Qlogic model for this SUn EOM HBA and I can not gfind it. I need to get the drivers to connected to a EMC Clariion array. Any help would be greatly appreciated.

SUn model and pn#:
SUN X6767a (SG-XPCI1FC-QF2)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I don't know what kind of OS you used
but you can find the driver from here
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SunOEM.aspx?oemid=124
just download what you need
search "x6767a"

Posted on May 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers for 375-006 with windows 7


click start control panel administration tools computer management device manager scroll through all of your devices

if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver


if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver

if you computer came with a motherboard disk the drivers could be on it

or you might have to download them

rather doing a driver hunt which can take hours

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

it might take some time being a freeware driver solution

note: it will find all of your outdated drivers

this is a free driver solutions
they will automatically search for and find the correct driver
also at cnet
http://download.cnet.com/2000-20_4.html
on the home page you should see a search tab just type in what you are looking for
IE: motherboard name sound drivers

http://www.innovative-sol.com/drivermax/
free program, paid update available


hope it helps

Jun 06, 2012 | Sun (375-0006) (3750006) SCSI Controller

1 Answer

Sun V60 box cannot be accessed remotely. os is Linux


What method are you using to try to access it? If you are trying to use SSH or Telnet, you will need an SSH or Telnet daemon running on the server. If you are trying to access it from a computer that is not on the same subnet, you will need to forward the Telnet or SSH ports through your router.

Apr 01, 2011 | Sunfire V60 V65 (x5132a)

1 Answer

Getting the following error repeatedly: A parity error was detected on \Device\RaidPort1. Source: adpu320 Event ID: 5 Any help would be greatly appreciated...


Any "Parity Error" is from a communication error on the SCSI bus, and it's bad! Errors are a way of life, and the SCSI transceiver has failsafes to fight them, and one of these is parity. Consider it extra data that the controller sends when you transfer data to your hard disks. Once there, the drives transceiver does a simple ccheck and verifies that the parity is correct. If not, a Parity Error is generated.

99% of the problems surround the SCSI bus itself in the form of a damaged SCSI cable, loose terminator, or a bent pin on a SCSI connector (latter being most common). This error is more apparent after moving the SCSI devices, resulting in unplugging and then replugging the cables back onto the Targets (HDD, CD/DVD ROM, printer, etc.) or back onto the Host Bus Adapter (HBA - the 29320 in your case). Check ALL pins. You can try to straighten the pins, otherwise it's time to replace the cable. REMEMBER that terminators are a must and can also cause Parity Errors if there is no termination present on one end of the bus or the other.
This coming from an ex-Adaptec employee and support person! :)

Best of luck

Mar 02, 2011 | Adaptec 29320 SCSI Controller

1 Answer

Serveraid m5014 is installed. when i ran serveraid manager, it cannot see the m5014 controller. can you help?


Hi,

In order to detect the controller you have install Mega raid manager not the one you installed

Download it from the below link.

http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5077712

Hope this would work.

Please don't forget to vote me if you are satisfied

Thanks

Jan 21, 2011 | IBM SERVERAID M5014 256MB SASSATA LP HBA...

1 Answer

Tekram TR-824: cannot update BIOS


Download from siliconimage.com "UpdFlash" and

Jul 03, 2008 | Tekram /Areca PCI to Serial ATA...

1 Answer

250GB Samsung 7200 rpm SATA300 hard disk, 8MB cache HD250HJ


Disk drives themselves do not require drivers. The storage controller (sata chipset) is what you should be looking at to determine compatibility. Do you know the manufacturer and model? (even just knowing the manufacturer/model of the motherboard would help if the SATA ports are on the motherboard).

Dec 21, 2007 | Storage Controllers

1 Answer

Problem with new array.


Do you see your new disk in the "Disk Management" window? To get there go to "run", type "compmgmt.msc", then click disk management. If you do see the disks there, then you need to format the disk to a "basic" configuration. If your new disk/volume does not show up there, I would suggest a hard reset on your server whenever possible. I see this issue at times with Windows and newly added storage array logical drives.

Aug 31, 2007 | IBM Total Storage DS400 (13n1777) Fibre...

Not finding what you are looking for?
Sun 2GB PCI Single FC-AL Host Adapter (p/n X6767A/SG-XPCI1FC-QF2) Storage Controller Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sun Storage Controllers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Robert Graf

Level 2 Expert

156 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Sun Storage Controller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...