Question about Canon BubbleJet i560 InkJet Printer

1 Answer

Stripey printing All my cartridges are brand-new but when printing anything it seems to print stripes, some faded or unprinted lines followed by reasonably dark lines. Fine print seems to print OK but anything with graphics, large print, or bold ends up with this striped effect. Is there something inside that needs replaced or cleaned?

Posted by on

  • emanuela529 Feb 07, 2009

    I no longer have the installing disc. So, I have simply deleted the link of the printer, turned the printer off, disconnected it, and restarted the computer. When the computer was back on the printer reconnected and turned on, I tried a test page. It worked. However, when I tried to print, it was not even printing the stripes anymore, the sheet was going through, but no marks on it. HELP!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Posted on Jan 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

~Brother MFC 3220c printing problem-o!~


clean the print head with water on a rag. it could need new cartridges also.

Sep 26, 2012 | Brother MFC 3220C All-In-One InkJet...

1 Answer

Printing part words, fading print quality


there are 2 cartridges in for this printer, have you tried replacing both cartridges with new ones?

If yes then your printer needs some maintenance too

Mar 28, 2010 | HP PSC 1210 All-In-One InkJet Printer

3 Answers

Samsung CLX-2160, keep getting faded toner stripe down page. changed toner numerousof times The same problem occurred for me after only 300 pages. The black color on the all prints is faded out on the...


Everyone will tell you that it's the Imaging Unit - happy to say that's not true. If it was the imaging unit the colors would not come out right either. I bet if you print a test page that all the colors come out fine across the page. It's only the black.

Also - if you replace the black toner cartridge, or reinstall your printer and drivers like some people will tell you - still no results.

The problem is in the black toner cartridge PATH inside the printer. Something has jammed it up a bit. Try taking out the black cartridge and blowing firmly into the small hole at the bottom of the spout that looks to have a sponge inside. Use a straw and make sure your air blown is dry. Then lightly tap the cartridge a few times. Then use the straw and once again blow very firmly inside the receiving path (inside the printer) for the spout on the cartridge. Make sure you are blowing into the spout path at the bottom - not the gear drive path in the middle - as that will not do any good.

Replace the cartridge, warm up and print another black and white page. You should see that the faded out section is gone or diminished in size. If it is not gone, simply repeat the above steps until it is gone. You will see that the faded out strip gets smaller and smaller each time until it's gone. I had to repeat five times, but eventually got it corrected. Now prints like brand new so don't get discouraged.

Loki

May 18, 2009 | Samsung CLX-2160N All-In-One Printer

1 Answer

Canon fax-B840 - Print is "stripey"


No not yet,the problem is the cartridge,sometimes even new cartridges might have a dry printhead
Remove you cartridge,put the printhead side in about 5mm of hot water and keep it there for 5 minutes,take it out and do head cleanning again.

Mar 12, 2009 | Canon FAX-B840 Plain Paper Bubblejet

1 Answer

I have a Xerox Phaser 8400 with image problems. After power up it prints a Startup Page - That page is black text which faded and slightly distorted in some areas and in areas that are in Color only...


What you are describing is a bad print head. You can try running the eliminate light stripes several times, and jet substitution, but most likely the print head will have to be replaced to remedy your problem.
You can try googling. Phaser printer print heads or phaser printheads.
There seems to be a secondary market appearing for those print heads. I can tell you from Xerox, if you have no maintenance agreement, they cost $750 per print head.
Honestly, having worked on about every type of color printer known to man, the new solid ink phaser printers, produce a dry ink image of 2400 x 2400 dpi with ink particles that align end to end. The resolution of those printers are remarkable and can be purchased for less than the price of one of those new print heads.
Now for reliable, albeit somewhat not as sharp a color image, but still exceptional, you really can not beat an HP.
The ink stick technology really no longer has the color vividness advantage it initially had. The inks that align end to end, have ended that advantage and are sure a lot cheaper to operate per page.

Feb 27, 2009 | Xerox Phaser 8400 Laser Printer

1 Answer

Repeating wide smudgy horizintal line across my printed pages


I had the same problem, replaced the PCR in the cartridge, the small black drum that pre charges the drum and erase the old image.
After that print was all back ok.

Regards

Dec 11, 2008 | HP Q2613A OEM Genuine Black Laser Toner...

1 Answer

HP 5610 - printing fades down the page


the printer carriage might be wearing out, it happens on the 5610's, may be time for a new printer. The fading issue sounds like a cartridge issue. Try a oem?

Nov 14, 2008 | HP Officejet 5610 All-In-One InkJet...

2 Answers

Printing problem


The black cartridge printhead needs to be cleaned or replaced. Follow your printer manual instructions.

Mar 18, 2007 | Canon PIXMA MP780 All-In-One InkJet...

Not finding what you are looking for?
Canon BubbleJet i560 InkJet Printer Logo

Related Topics:

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1842 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...