Question about Conair Weight Watchers Glass Digital Body Fat Analysis Scale - 1 ea

1 Answer

My scale came up with an error message of ErrL

I have a Weight Watchers WW42 model scale that was made by Conair. I tapped my scale like I normally do, it went to the 888.88 like it was going to register to "0" and the error message came up. Assuming it was the batteries, I bought two new batteries and proceeded to tap it like normal; the 888.88 came up and then the error message.

Is my scale defective?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 59 Answers

Here is the contact information for conair
http://www.conair.com/-cn-18.html

Posted on Mar 21, 2009

1 Suggested Answer

  • 1 Answer

SOURCE: Error message ErrL

My scale had the same problem.  I replaced the battery, but still got the same message.  My wife noticed that one of the feet on the bottom of the scale was loose.  The feet are twisted on to the scale and held by two small flanges.  When I gently pulled the loose foot away I noticed that a small black wire had broke.  I used my fingernails to remove a small bit of the wiring cover and twisted the ends back together.  I then hide the wires back in a recessed area on the foot and placed it back on the scale.  Worked just like the day I got it.   Hope this helps!

Posted on Feb 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset my Conair WW37BFX Weight Watchers scale


Whenever I try to add weight to my user it says error. Any help?

Aug 26, 2013 | Scales & Body Fat Analyzers

1 Answer

Instuction manual for weight watchers by conair glass memory precision scale-model ww43d


Why ask me ?
I aint no fitness guru LOL

They dont have one on the conair site ?

Nov 29, 2011 | Weight Watchers Glass Electronic Scale

1 Answer

My bathroom scales ww35cha stopped working, i replaced the battery and now the scales turn on, but do not display a weight when u step on. Instead the weight shows '0'


you have 4 button on this model
1 tap the scale to start, it show 0.0
2 tap set to set person and height, age ...( use set, up, down buttons )
done
when start use
1 tap scale to start , show 0.0 again
2 tap user again and again to choose your user
3 wait after it show your height, age, then it show 0.0 step on the scale and you're done.
i've been through becuase my friend lost his instruction manual.
Now it wook
Have Fun
duccotam@yahoo.com.au

Nov 16, 2009 | Conair Weight Watchers WW35 Body Fat Glass...

2 Answers

Where can I get a manual, after moving I can't find mine!


Troubleshooting Conair WW81 Weight Watchers Body Fat/Hydration ... Solve Your "Conair WW81 Weight Watchers Body Fat/Hydration Scale" Problem Now! ... Tanita Ultimate Scale 2001 - no user manual -how to set. ...
www.fixya.com/support/...conair_ww81...body.../solutions

Oct 05, 2009 | Conair WW81 Weight Watchers Body...

1 Answer

Lost instructions for bmi and special feature settings


Conair Support – Online Tech Help to Troubleshoot Problems
by: Guest1223497 in Conair Weight Watchers WW-87 Body Fat Glass Scale | 9 months , 28 day(s) ago | 10 ... Manual or Instructions for Conair CID502 Phone ...
livesupport.maybenow.com/Conair

Oct 04, 2009 | Conair Weight Watchers WW-87 Body Fat...

1 Answer

Weight Watchers bathroom scale, Model WW60X


I got it! Press "set". You should see "start goal" in the bottom right. Press the user # you want to save as and press "set" again. The display will blink then display "0.0". Step on the scale to get your current weight. Once it's read you current weight, press "set". A goal weight will display. Press "User 1" to make your goal weight go up and "User 2" to make it go down. Press "set" when the display shows your goal weight. That's it. Now all you have to do is press your user # and wait for "0.0" to display before stepping on the scale.

Apr 24, 2009 | Conair WW60 Weightwatchers Scale

1 Answer

Error message ErrL


My scale had the same problem.  I replaced the battery, but still got the same message.  My wife noticed that one of the feet on the bottom of the scale was loose.  The feet are twisted on to the scale and held by two small flanges.  When I gently pulled the loose foot away I noticed that a small black wire had broke.  I used my fingernails to remove a small bit of the wiring cover and twisted the ends back together.  I then hide the wires back in a recessed area on the foot and placed it back on the scale.  Worked just like the day I got it.   Hope this helps!

Jan 28, 2009 | Conair Weight Watchers Glass Digital Body...

Not finding what you are looking for?
Conair Weight Watchers Glass Digital Body Fat Analysis Scale - 1 ea Logo

4,129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Conair Scales & Body Fat Analyzers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Danny Kuhlmann

Level 3 Expert

1442 Answers

Are you a Conair Scale and Body Fat Analyzer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...