Question about Canon PIXMA MP130 All-In-One InkJet Printer

2 Answers

CANON PIXMA MP 130 ink absorber

Hi,
I have a problem with the ink absorber - it says it's almost full. I did what you advised here : http://www.fixya.com/support/t230283-waste_ink_absorber
but I can't reset the counter for the absorber. I can't find the Service Menu Counter Access. Either there are no such options in my printer or I'm not looking in the right place? Could you help me, please?

my e-mail: kamilczapiewski@gmail.com

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Canon Master
  • 525 Answers

To reset waste ink counter:
Press Menu-Scan-Copy-Scan to enter service menu.
Use arrow keys to scroll to "Service menu counter access".
Press OK.
Use arrow keys to scroll to "ABS-M DOT COUNT"
Press Copy.
Use arrow keys to reset count to zero.
Press OK.
Press Stop/Reset.

OR

turn on the printer press menu
press scan, copy, scan to enter service mode
use> to get to nvram
set ABS-M level to 0
Set ABS-P level to 0
Press stop to exit......Done.

I hope this help!

Posted on Jan 15, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

Hi There
How To Reset Waste Ink Canon Pixma MP130

The waste ink take is actually just a felt pad that sits under the printer mechanism inside the case and absorbs the ink from your cleanings.
From what I gather, it’s both a time consuming and expensive proposition to take to Canon to fix.
And they won't tell people how to do it themselves.

Remember of course, you've got to cycle the cleaning process a huge amount of times to get this to occur.

But when it does, there is a fix-it-yourself solution that is both safe and effective for the printer, and free.
You have to be slightly mechanical to do this.
If you you've never used a screwdriver and are all thumbs, but give it a shot or give it to someone halfway coordinated to do this for you.

You may RESET the printer code first if you like or do it after you clean the pad

Here this step by step to resetting waste ink counter printer Canon Pixma MP130

1.You will include printer
2. Press button MENU, then SCAN, COPY and again SCAN - they entered
into the service regime
3. Select NVRAM ACCESS and further BY OK.
4. Select SET Abs- m level and advance value equal to zero
5. Select SET Abs- r level (if there is) and also you will establish into zero
6. You will turn off printer by button POWER.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon Pixma MP 130/10 Waste Ink Absorber almost full


  • Printer on, press Additional Functions, Scan, Copy, Scan. Now you should be in service mode.
  • Select Test mode.
  • Select #8 Printer Test, push the + or - button until it says 8-3 then hit the select button.
  • The menu will say EEPRON Clear
  • Select Ink count which is option (0) and press set
  • Then press Stop/Reset Followed by the power button and then wait for it to restart.
If you need further assistance. feel free to ask. If this solves your issue, please rate it. Thanks, Joe

Feb 09, 2011 | Canon PIXMA MP130 All-In-One InkJet...

1 Answer

Pixma MP 130/110 Printer/Copier/Scanner waste ink absorber full, It neither prints nor copies


Cleaning the waste ink pads is easy.

Are your ink tanks empty and have you been using non Canon cartridges?

Regards,
Worldvet

Aug 01, 2008 | Canon Printers & Copiers

1 Answer

Canon 130 printer ink absorber is full. need advice to fix.


Hi, is it canon 130 or canon 1300, if it is canon 1300 you can try to fix it using a manual reset and software reset. You can visit my blog here for free reseter and tutorial:

http://feedproxy.google.com/~r/Inkq-mac/~3/eJkvGfLlL1U/how-to-reset-canon-pixma-ip-series.html

To know why "waste ink absorber is full" message appear, you can visit it here:

http://feedproxy.google.com/~r/Inkq-mac/~3/0DgDreiMUw8/waste-ink-absorber-is-full.html

If the reseter won't help you please let me know. Hope this help.

Dec 22, 2009 | Canon Printers & Copiers

1 Answer

My Canon Pixma MP 170 tells methe waste ink absorber is full...


It is a shop repair since you have to use Canon diagnostics to reset the count and clear the error. The new part is around $10.00 only.

Jul 01, 2009 | Printers & Copiers

2 Answers

Printers Problem Canon MP 145 code E27


Try this fix.....CLICK HERE

It works the same for the Canon MP 150 or MP 160

Jan 25, 2009 | Canon PIXMA MP160 All-In-One InkJet...

7 Answers

CANON PIXMA ERROR 5800


The waste absorber is full ,Replace the pads
then if you still get the error,you can reset it by following the directions below.
(reset without replacing pads can cause damage)

1) Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by pressing <--- or ---> then OK
3)SET ABS-M LEVEL TO 0
4)OK

Jan 20, 2009 | Canon Pixma MP450 All-In-One InkJet...

1 Answer

Ink absorber is full


You would need to take it to a canon service centre..

Or look on ebay, i thinks its just cotton wool type wadding thats in there but i dont know exactly where it would be inside the printer.

Plus for the same of about £15 if anything goes wrong they have to fix it.

Jan 20, 2009 | Canon PIXMA MP150 All-In-One InkJet...

4 Answers

Canon PIXMA MP160 error 27


My canon pixma mp 160 printer/ scanner is showing E 27, ink absorber is full need help please.

Jul 20, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Canon mp 130 printer waste ink


hi
am AJAY FROM INDIA
off the printer and open upside cover,see 'the waste ink absorber if there any spunge pull that
and empty the waste ink from sponge or waste ink absorber
ok

again cloused the upside cover
ok

Jan 03, 2008 | Printers & Copiers

Not finding what you are looking for?
Canon PIXMA MP130 All-In-One InkJet Printer Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...