Question about Nortel T7316E 2-Line Corded Phone

Open Question

Nortel Networks phone has flashing red light that will not turn off

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 52 Answers

SOURCE: Change Time

THe older norstar systems you had to go into programming to change time and on the newer systems press feature * time on your phone and follow the prompts. On the older systems go in to programming press feature ** 266344 (config) then pswd 23646 (admin) on your key pad this gets you into programming press next until you get to change time. You need an overlay which can with your phone system manual. If need more info please ask agian hope this helps.

Posted on Jan 04, 2010

consultel1
  • 860 Answers

SOURCE: Why wont red Message light on my Nortel Phone

more than likely someone in your office left the message rather than the voice mail. to clear it press the call soft key below the screen. the screen should display who left the message with two of the soft keys labeled call and erase. press the erase soft key. it's possible the the person/s that left the message left multiple messages. in that case repeat the procedure til all messages are canceled

Posted on Jan 14, 2010

consultel1
  • 860 Answers

SOURCE: how to change the time one hour ahead

Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.

1.- To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
2.- Enter password (default = 266344) - display should read "Terminals & Sets"
3.- Press "NEXT"(bottom right arrow) 5 times - display should read "Time and Date"
4.- Press "SHOW" (top right arrow)- display should read "Hour:___"
5.- Press soft key "CHANGE"
6.- Enter hour - display should read "AM OK or Change"
7.- Select AM or PM
8.- Press "NEXT"(bottom right arrow) - display should read "Minutes:___"
9.- Press soft key "CHANGE"
10.- Enter minutes
11.- Press "NEXT"(bottom right arrow) - display should read "Year:___" 12.- Press soft key "CHANGE"
13.- Enter year
14.- Press "NEXT"(bottom right arrow) - display should read "Month:___"
15.- Press soft key "CHANGE"
16.- Enter month
17.- Press "NEXT" (bottom right arrow)- display should read "Day:___"
18.- Press soft key "CHANGE"
19.- Enter day
20.- Press "NEXT" (bottom right arrow)
21.- Press the Rls key

Posted on Mar 19, 2010

consultel1
  • 860 Answers

SOURCE: How do we change the phone numbers on the speed dial

Feb 27, 2010- Speed dial numbers 001 -255 (256-279 are personal speed dial entries) are system wide speed dial numbers and are changed in system programming. System programming is done on M7310,M7324 and T7316 set only.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say Terminals&Sets.
The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the next key 3 times(bottom right arrow).
The display should say Sys speed dial.
Press the show key (top right arrow)
The display should say speed dial#:--
enter in the speed dial number you wish to program.
Press the show key (top right arrow) .
The display should show the existing speed dial number
Press the chg key
Enter in new telephone number
press ok when finished
repeat for remaining speed dials
Press the release key when finished

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All buttons are flashing


Unplug it and plug it back in, for a reset, hope a power surge didn't fry it if so call the electric co they may reimburse you.

Feb 19, 2014 | Nortel Networks T7316E Telephone Platinum...

1 Answer

Flashing lights on nortel t7316e phone


ld 20
req:prt
Type:phone Type
Dn:Particular DN
enter
enter


Req:enlu Tn
req:stat tn

Mar 31, 2013 | Nortel Norstar 16-Line PBX Speakerphone

1 Answer

I2007 keeps rebooting no chance to configure


mine do the samething.
stock on the startup,

copyright (c) 2004 Nortel Networks
I2007 IP telephone


Nortel Networks

i tried to reset, hard resert and still stuck there

Feb 23, 2012 | Nortel i2007 IP Phone

2 Answers

I have a used Nortel Networks T7316E and for some reason when I plug it in to the phone line at home I get no dial tone and the light at the top and the three buttons on the bottom (headset)(Mute) etc......


The Nortel 7316 set is propriatary which requires the nortel system in qrder to work., The pulsing lights are the set reacting to the standard line voltage.In order for it to work in your house you'll have to install the nortel phone cabinetand then attach the set(s) to it.

Jan 19, 2010 | Lands Phones

1 Answer

Why wont red Message light on my Nortel Phone


more than likely someone in your office left the message rather than the voice mail. to clear it press the call soft key below the screen. the screen should display who left the message with two of the soft keys labeled call and erase. press the erase soft key. it's possible the the person/s that left the message left multiple messages. in that case repeat the procedure til all messages are canceled

Jan 13, 2010 | Nortel T7316E 2-Line Corded Phone

1 Answer

No red light


try FEATURE 6 5 -or- FEATURE # 8 0 6

Jun 08, 2009 | Nortel T7316E 2-Line Corded Phone

3 Answers

Changing name in nortel T7316E handset


We would like to change the name displays on our phones

Mar 05, 2008 | Nortel Norstar 16-Line PBX Speakerphone

Not finding what you are looking for?
Nortel T7316E 2-Line Corded Phone Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

dan4261

Level 1 Expert

14 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Nortel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...