Question about ZTE Warp

1 Answer

My zte warp phone was in the middle of a software update wen i removed the battery now it will only show the black screen with the green android logo on it

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Contributor
  • 43 Answers

Please try resetting the phone and check if would works.Power off the phone.2.Press and hold Vol+ key and Power key simultaneously until several blue sentences appear on the screen which are reboot system now; apply update from sdcard; wipe data/factory reset; wipe cache partition.3.Use Vol+ key and Vol- key to move the cursor to "wipe data/factory reset" and press camera key to confirm it.4.There are many words "No" and one sentence "Yes -- delete all user data". Use Vol+ key and Vol- key to move the cursor to "Yes -- delete all user data". Press camera key to confim it.5.The phone will finish the reseting by itselft after about 10 seconds later and then the cursor will be on "reboot system now" and press camera key to confirm it. The phone will reboot automatically.There is no unlock and password any more after the phone is on.

Posted on Jan 24, 2013

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 13 Answers

SOURCE: Its for ZTE SKATE. When i switch on the phone, the

sounds like a boot look put it in bootloader moded and do a factory reset

Posted on Nov 19, 2011

  • 10 Answers

SOURCE: zte warp got wet

When this happens, immediately remove the battery. Let the phone dry (it may take several hours) before you put the battery back in and try to turn it on. If it is only water, and you act quickly enough, your phone may be okay.

Posted on Oct 22, 2012

SOURCE: I dropped my ZTE Warp phone and my screen went blank and wont come back on what can I do to fix this problem

what can i do?

Posted on Dec 31, 2012

jerry_kramer
  • 3904 Answers

SOURCE: my phone has a black screen and a green robot on it when i turn it on

That is the boot up screen for the android. You can change the back ground in the settings menu under personalize I believe it is.

Posted on Jan 21, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My phonedoes not start after udate fromboost 4g enhancement. It stucks on 4g lte logo.


enovo Lemon K3 Note 5.5 inch IPS Screen 4G ... - Fixya

www.fixya.com/support/p20874808-lenovo...k3_note_5.../page-6
Recent Lenovo Lemon K3 Note 5.5 inch IPS Screen 4G Android OS 5.0 Smart Phone ...My phonedoes not start after udate fromboost 4g enhancement. It stucks ...

Crosley CR5503A-BK... Repair Questions - Fixya

www.fixya.com/.../p5755469-crosley_cr5503a_bk_pictograph_black
Jul 16, 2014 - My phonedoes not start after udate fromboost 4g enhancement. It stucks on 4g lte ... How do I transfer a photo from my phone to my laptop?

My bluetooth will not work on my hua y301 4g phone - Fixya

www.fixya.com/.../t23663603-bluetooth_will_not_work_hua_y301_4g
Feb 26, 2014 - my bluetooth will not work on my hua y301 4g phone - Cell Phones question. ... My phonedoes not start after udate fromboost 4g enhancement.

ZTE WARP 4g N9510 keeps FREEZE & Glitching ' Android Forums

androidforums.com > Android Phones > ZTE Warp 4G

Jan 01, 2016 | Cell Phones

1 Answer

My brand new zte merit z990g phone keeps reseting itself over and over again. Even after a hard reset (battery out for a few minutes, back in and power on) it just shows ZTE logo then the TracFone...


sounds like the system image is corrupt.
you are gonna have to locate another image from the internet, plug the phone into PC via USB tether cable, and perform system update using either official software or perhaps a hacker app.

Nov 20, 2013 | ZTE Cell Phones

2 Answers

How do i factory reset my zte concord v768?


Just try with the below steps to hardreset your phone:-
1.Switch off the handset, and press the power-key and volume-down key at the same time until get recovery mode;
2.Press home key get into next interface;
3.There will be four choices:reboot system now;apply update from sdcard;wipe data/factory reset;wipe cache partition;
4.Use "Vol+" and "Vol-" to move the cursor up and down;
5.Move cursor to "wipe data/factory reset," press "menu" key to select it.
6.Then use vol- key to move the cursor to " yes-delete all user data" , press menu key to select it.
7.Then choose reboot system now ,you phone will reboot itself.

Mar 24, 2013 | ZTE Cell Phones

1 Answer

Zte warp phone stuck on android logo


1.Power off the phone.
2.Press and hold "Vol+", "Menu", and "Power" key until the phone goes to recovery mode.
3.Use "Vol+" and "Vol-" to move the cursor up and down.
4.Move cursor to "wipe data/factory reset", press "Back" key to select it.
5.Now move cursor down to "Yes - delete all user data" and press "Back" to select it.
6.The data will be erased.
7.The cursor will be on "reboot system now" at the end, so just press "Back" key to reboot the phone normally.
WARNING: All user data will be completely cleared; the phone will be in a factory reset status.

Jan 23, 2013 | ZTE Warp

2 Answers

My phone has a black screen and a green robot on it when i turn it on


That is the boot up screen for the android. You can change the back ground in the settings menu under personalize I believe it is.

Jan 21, 2013 | ZTE Warp

1 Answer

My phone just has a android man on it


This might be a software issue on the phone. So, reset your phone by following instructions:-
1.Power off the phone.
2.Press and hold Vol+ key and Power key simultaneously for about 10 seconds until the some option appear on the screen which are reboot system now; apply update from sdcard; wipe data/factory reset; wipe cache partition.
3.Use Vol+ key and Vol- key to move the cursor to "wipe data/factory reset" and press camera key to confirm it.
4.After 5 seconds, the cursor will be on "reboot system now" again and press camera key to confirm it. The phone will reboot automatically.

Jan 21, 2013 | ZTE Warp

2 Answers

Zte-warp n860 droid frozen on greendroid pic and indicator light shows that device is charging even if it isnt,when i plugged the phone back up to computer after it developed this problem the computer


Hi even i am using the same ZTE warp phone, even i was not able to receive calls are make calls , my phone was getting freezed, even i visited the ZTE warp boost store, they failed to fix the repair, they informed to to contact customer care, when i called customer care regading this information , they took my e-mail address and my information and they informed me that to upgarde the software, so the software link has benn sent to my mail, then later i upgarded my phone , my problem was solved, so i would suggest u to contact customer care

Mar 17, 2012 | ZTE Warp

Not finding what you are looking for?
ZTE Warp Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top ZTE Cell Phones Experts

Audrey Messer
Audrey Messer

Level 2 Expert

176 Answers

john smith

Level 2 Expert

388 Answers

Nyte_Ryder

Level 2 Expert

101 Answers

Are you a ZTE Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...