Question about Viper 791XV The 791XV is a 2-way Security and Remote Start system. Th

2 Answers

Car is completely locked down

I have a viper 791 XV in a 99 dodge intrepid and the alarm has locked the car down and it will not start or unlock with the remotes....It is unreal i looked for the valet button and the guy i baught the car from must not have had one installed so what do i do.....

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 116 Answers

Let's hopethat the installer actually put in the valet switch for the Viper! Lcate the valet switch. ALWAYS put mine down by the e-brake lever under dash. (I assume that the alarm is going off? If not, go to next step.

Find the alarm/start brain under dash. Unplug main 6 pin 12 gauge wire harness. Wait 5 minutes, then re-appy the power plug. Alarm "may" go off, then try again.

Hit me back if you need further assstance. TTYL

Larry T
Winona Lake, IN

Posted on Jan 28, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to replace the battery on my 99 dodge intrepid and i have a alarm system now im unable to drive because the alarm has locked down the car what can i do?

Posted on Jul 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hornet alarm doesn't chirp, activate, or go off anymore. I've tried to check the valet mode, but it doesn't do anything. The remote still locks and unlocks door's and it cranks.


My car alarm doesn't chirp all the time, but it still unlocks the ...

forums.anandtech.com > Social > Off Topic

AnandTech
Feb 3, 2003 - 11 posts - ‎7 authors
My car alarm doesn't chirp all the time, but it still unlocks the doors. ... Distributed Computing. ·, Security. ·, Social. ·, Off Topic ... The rest of the electrical systemseems fine. ... Just read the owners manual and find out to to re-enable the ... but like when I arm my alarm it arms but then it'll go off for no reason.

Alarm Troubleshooting Help Tips - Dr.Detail

www.drdetailshop.com/TROUBLE.html
When you try to start the car the alarm goes off.. It could be your battery. 3. Try to start no sound, nothing lights up, alarm doesn't work. It could be a loose battery ...

Viper Alarm won't chirp help!! - 12 Volt Forum : Car security ...

www.tintdude.com > ... > 12 Volt Forum : Car security / Convenience

Sep 11, 2006 - 7 posts
posted in 12 Volt Forum : Car security / Convenience: Hi I am new to this site ... Myproblem is when I lock it it won't chirp or roll my windows up ... If I hold the lock button the siren will go off,and if I press and hold the AUX my windows will go down. ... It won't chirp when activated or when I hold the arm button.Missing: hornet

How To program DEI Viper Python Avital Sidewinder Valet ...

? 3:34
https://www.youtube.com/watch?v=r01ntAXGxBw
Mar 10, 2011 - Uploaded by Lessco Electronics
hi I have the viper 7142v alarm system,tge problem is I only had one remote,I ordered a spare but ... My alarm only chirps when i am programming lock and unlock functions. it does not ... As soon as I connect car battery my alarm goes off. ... I obviously don't have a remote, and it doesn't have a valet switch.

Jan 06, 2016 | Vehicle Security Systems

1 Answer

I have a viper 791 vx installed in a 99 bonneville. The key will turn the engine over but won't start. The remote start will start the car but I put the key in and push the brake and the car dies. I had...


Get rid of the junky viper and get a bulldog rs82b and you will never have a problem...I have installed over 40 of these since November and NEVER had any problems....

Feb 03, 2015 | Viper Vehicle Security Systems

1 Answer

The viper 350 system locks and unlock no chirping sound and the car does not start


when this happens it is because it has a valet function. this function is used to turn off the alarm but the lock and unlock will still work. to reactivate the alarm open the door, turn the key on, then off and then press valet switch once and this will reset the alarm.

May 29, 2014 | Viper Vehicle Security Systems

1 Answer

I have a Viper 5301. Just recently the blue light on the valet stopped blinking when the car is locked with the remote. It just stays on all of the time, no blink. At the same time, the remote started...


The blue light on solid means that your alarm is in the valet mode. Open any door, press lock, unlock, lock. This should put the alarm back into an active mode. Afterwards, check the system for normal operation.

Apr 14, 2011 | Viper 5301 LE 2 Way Car Remote Starter...

1 Answer

My viper 5002 alarm i don't know witch wire's to use off the viper alarm's for the power lock's


The door lock wires for the Viper alarm are green (-)lock and blue (-) unlock. The Viper system only provides a negative lock/unlock pulse for the door locks. So, if you are working on a vehicle that has positive door locks you will have to install relays to change the polarity.

Nov 08, 2010 | Viper 5002 2 Way Car Alarm with Keyless...

2 Answers

Disable viper alarm


Yes the best way is disarm the alarm and put in a Valet Mode
To activate the Valet Mode do the following:

There is a push button or toggle switch to disable the alarm (to engage the valet mode). Without knowing where this
switch is you won't be able to disconnect the alarm.

1. Put the key in the ignition and turn it to the "on" position.
2. Flip the toggle or hold the push button for at least 5 seconds.
3. The LED. light will stay solid on.
4. Turn the ignition off
5. Release the push button. If you have a toggle leave it alone in step 2

Jan 07, 2010 | Viper 5701 VIPER 5701 2-WAY ALARM w/REMOTE...

3 Answers

The alarm doesn't chirp and no flash of my headlights anymore. Also the blue light stays on the little receiver/antenna on the windshield wheather it is locked or not. What is the problem?


sounds like the alarm went into valet mode. that's usually what a solid blue light means on most viper alarms. check your owners manual on how to take the alarm out of valet mode. with the 5701 alarm its usually done with the remote. hope this helps

Aug 04, 2009 | Viper 5701 VIPER 5701 2-WAY ALARM w/REMOTE...

1 Answer

Keyless Entry doesn't unlock my doors anymore


Did you get help? My problem is similar but not as bad. My viper550ESP no longer remotely unlocks the doors (well very, very occasionally it does). That is the only problem.

Jul 21, 2009 | Viper 5701 VIPER 5701 2-WAY ALARM w/REMOTE...

Not finding what you are looking for?
Viper 791XV The  791XV is a 2-way Security and Remote Start system. Th Logo

607 people viewed this question

Ask a Question

Usually answered in minutes!

Top Viper Vehicle Security Systems Experts

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Kirk Augustin
Kirk Augustin

Level 3 Expert

2019 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Viper Vehicle Security System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...