Question about Audio Players & Recorders
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: standby button stuck
Hello. Check all of the buttons on your unit to make sure that they are not stuck...you can feel the click they make as you push it then they pop back out as your finger pulls off. Any stuck button will lock up your microprocessor and keep the unit from turning on. All other problems will require a consumer electronics technician to trouble-shoot the turn on circuit. If you know how to use a meter and know how to solder\unsolder and require further assistance you can contact me. Good luck.
Posted on Oct 19, 2008
SOURCE: No Sound - LCD Volume says 99
Found a solution that works. Power down the receiver. Unplug it from the wall. Wait 10 minutes. Plug it back in and power it back up. Worked like a champ to fix this exact problem with my TX-SR601.
Posted on Nov 01, 2008
Are you referring to a system shutdown on the part of the Onkyo or a circuit breaker in your houses fuse panel / breaker box?
Posted on Aug 02, 2009
SOURCE: I need to find out
Your Instruction Manual is available here:
Beginning on page 63 there is extensive information on the use of remote controllers.
It was not clear; are you using your TX-SR601 remote or are you using another remote?
If your remote is unable to 'learn' your receiver and your code is not included in the Manual , recommend you contact Onkyo Customer Support:
Posted on Feb 28, 2011
Tips for a great answer:
Feb 22, 2016 | Denon Audio Players & Recorders
"Not available in Zone 2 mode" Setting not allowed because the Zone 2 mode is turned on.
"Zone 2 is not On" Will not work because the Zone 2 has not been turned on.
TURN ZONE 2 ON.
Register and download the manual for free at retrevo.com
Page 55 shows the prerequisite settings for using the surround back terminals for Zone 2.
Page 60 describes USING Zone 2 and points out that only analog sources can be used with Zone 2. Are you trying to use digital sources? Read the notes regarding REC OUT.
Jul 07, 2011 | Onkyo TX-SR601 Receiver
Jan 07, 2010 | Audio Players & Recorders
Dec 07, 2009 | Onkyo TX-SR601 Receiver
Aug 02, 2009 | Onkyo TX-SR601 Receiver
Sep 09, 2008 | Televison & Video
Aug 29, 2008 | Onkyo TX-SR601 Receiver
31 people viewed this question
Usually answered in minutes!