Question about ZTE Warp
Phone turns on but wont go passed the android logo screen
1.Power off the phone.
2.Press and hold "Vol+", "Menu", and "Power" key until the phone goes to recovery mode.
3.Use "Vol+" and "Vol-" to move the cursor up and down.
4.Move cursor to "wipe data/factory reset", press "Back" key to select it.
5.Now move cursor down to "Yes - delete all user data" and press "Back" to select it.
6.The data will be erased.
7.The cursor will be on "reboot system now" at the end, so just press "Back" key to reboot the phone normally.
WARNING: All user data will be completely cleared; the phone will be in a factory reset status.
Posted on Jan 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your phone runs android, then you don't have to worry. Do not enter any patterns for the next 5 or 10 minutes. Then carefully enter the correct unlock pattern and voila! you should be able to unlock your phone.
Posted on Oct 19, 2012
SOURCE: zte warp got wet
When this happens, immediately remove the battery. Let the phone dry (it may take several hours) before you put the battery back in and try to turn it on. If it is only water, and you act quickly enough, your phone may be okay.
Posted on Oct 22, 2012
Tips for a great answer:
Oct 06, 2016 | Boost Mobile ZTE Warp Sequent Touchscreen...
Feb 04, 2016 | ZTE Cell Phones
Jan 11, 2016 | Tablets & eReaders
Jan 01, 2016 | Cell Phones
May 03, 2014 | ZTE Cell Phones
Aug 08, 2013 | Cell Phones
Mar 30, 2013 | ZTE Warp
Jan 21, 2013 | ZTE Warp
927 people viewed this question
Usually answered in minutes!