Question about Ryobi 351009000 Blade 1/4 x 6T x 59 1/4"L

1 Answer

Ryobi band saw blade does not cut straight

Have adjusted guides, tension and even a new blade regardless of efforts will not or can not achieve a stright cut.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 84 Answers

The side guides should be just off touching the blade (top and bottom) The thrust bearing behind the blade should be just off th blade while it is free running (T & B). The amount of blade exposed to the timber needs to kept to a minimum - like top guide abou 1/4" above timber. Then, correct tension for blade size :)

Posted on Oct 20, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: Ryobi Bandsaw model EBW4023L will not cut straight

I do a lot of resawing with mine and I have found that a 3/8" wide blade gives me nice straight cuts.

Posted on Jun 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ryobi 9" Band saw blade


The problem might be blade drift, feed & speed rates. Are you using a fence? Do you have a good blade? I had pretty good luck with my Haltbar blades of www.sawblade.com . Does your blade track properly? Check this blog site . This might help too.

Jan 23, 2013 | Ryobi Saws

1 Answer

Blade will not stay on cutting mark, even a straight line. My blade looks like a quarter inch on a nine inch band saw.


clean dust off the wheels, center the blade get it tracking and tension it so it has a medium high to (wide blade) high pitch (narrow blade) twang like a guitar sting when plucked with the saw turned off

Feb 19, 2011 | Ryobi 9 in. Benchtop Band Saw

1 Answer

Not cutting straight


All band saws do this to some extent, but here are some things to consider
1. The tension may be too low, so that it deflects excessively when you put a little pressure on it.
2. You may be using a blade with too fine teeth for the thickness of material you are cutting. The more teeth that are cutting at the same time, the harder you have to push to get them to cut.
3. You may have a dull or poor quality blade.

Apr 06, 2010 | Ryobi 9 in. Benchtop Band Saw

1 Answer

My blade on my Delta BS100 Shopmaster 9 inch bench top band saw wanders. It is impossible for me to cut a straight line even with a fence. I have adjusted the blade guides several times as well as the...


Check and see if one of the guides is out of alignment or if the blade is worn. Either one can cause the problem since you already checked the tension and guides. If the guides are worn they won't hold the blade true.

Dec 30, 2009 | Delta BS100 Shopmaster 9 Inch Bench Top...

3 Answers

Cut is always crooked. From the top to the bottom of the cut is always crooked. Can not get the saw to cut a 90 degree ( or even close to 90) angle. Even of I adjust the table to be out of square to the...


Hi,
It sounds as though you may be cutting too quickly. Try decreasing the pressure you are applying to the wood.
You could also try tightening the blade more, until it PINGS when you flick it with your finger.(When it's stationary of course)
I'm assuming your guides are adjusted correctly.
JR

Sep 27, 2009 | Ryobi 9 in. Benchtop Band Saw

2 Answers

Cutting straight


this is usually caused by a dull blade or you need to carefully re-adjust the blade guides

Aug 12, 2009 | Ryobi 9 in. Benchtop Band Saw

1 Answer

Band saw blade wanders.


cut freehand. A bandsaw blade will always run off to one side or the other, even using a fence.

The rip fence is intended for re-sawing only, and very thin strips

Jun 28, 2009 | Ryobi 9 in. Benchtop Band Saw

2 Answers

Ryobi Bandsaw model EBW4023L will not cut straight


I do a lot of resawing with mine and I have found that a 3/8" wide blade gives me nice straight cuts.

Jun 19, 2009 | Ryobi 9 in. Benchtop Band Saw

1 Answer

Cutting straight


The tension on the blade. the position of the guide rollers, and the condition of the blade are all important to get a straight cut. You might want to try lowering the guide rollers down close to the wood being cut. good luck.

Apr 26, 2009 | Ryobi 9 in. Benchtop Band Saw

Not finding what you are looking for?
Ryobi 351009000 Blade 1/4 x 6T x 59 1/4"L Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ryobi Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

JOHN LAPIER

Level 3 Expert

2422 Answers

Jim Thurston

Level 3 Expert

670 Answers

Are you a Ryobi Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...