Question about Hotpoint Ultima WF860 Front Load Washer
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Hotpoint ultima wf860
hi, i have the same machine..i have a feeling it does this annually to make you call an engineer. to reset it do this; hold the 'start' button until all lights display, then press 'start' again. hold the 'start' and 'on/off' button together until it reads d-end or d-off. it doesnt always work 1st time so keep trying, good luck x
Posted on Nov 14, 2006
The belt goes around the drum and onto the motor pulley. No need to loosen anything. Put tension on the belt and fit it onto the motor pulley by gently turning the motor and pushing the belt onto the pulley at the same time.
Posted on Nov 01, 2007
SOURCE: Hotpoint WF860
Hi , F07 fault is the heater circuit so it can be one of two things 1/ the heater is open circuit and neads replacing or 2/ the main pcb heater relay is faulty and that would require a new pcb
so first check the heater
Posted on Jun 12, 2009
try this - press start, press start again. Now press the on/off button and the start button at the same time and hold them down for 5-10 seconds until the display shows d-end or d-off.
Posted on Oct 31, 2009
/* Style Definitions */
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
font-family:"Times New Roman";
is under the rear of the machine inside the sump hose. Remove the lower rear
inspection panel and tilt the machine forward, keep it tilted by placing a tin
of peas or something under it at the rear. Now put a shallow bowl or dish under
the sump to catch any water that may still be it the drum and remove the
retaining clip. Pull the hose free from the tub and the filter is inside. (Work safe and remove the power plug from the wall before commencing
any repair) For more tips on repairs use this link selfix-uk
Posted on Mar 11, 2010
Tips for a great answer:
Dec 19, 2010 | Hotpoint Ultima WF860 Front Load Washer
Aug 13, 2010 | Hotpoint Ultima WF860 Front Load Washer
Mar 05, 2010 | Hotpoint Ultima WF860 Front Load Washer
Dec 31, 2009 | Hotpoint Ultima WF860 Front Load Washer
Jun 14, 2009 | Hotpoint Ultima WF860 Front Load Washer
Mar 27, 2009 | Hotpoint Ultima WF860 Front Load Washer
Feb 16, 2008 | Hotpoint Ultima WF860 Front Load Washer
May 16, 2015 | Hotpoint Ultima WF860 Front Load Washer
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: