Taking picture how come my camera does not take picture

hi,
you may re-set the camera to default position, use a new memory stick.

you need to replace the lcd, has a look here.

cameras : My Camera Freezes When I Turn It On Or Take A Picture

P, td, li {font-family: arial, u; font-size:9pt; margin-top:0px;margin-bottom:0px; word-spacing:1px;} If you camera freezes when you power it on or when you try to take a picture, you may have a defective memory card. To test your camera and the memory card, follow these steps:

1. Power off your camera.
2. Remove the battery from your camera. If you have a memory card inside the camera, remove that as well.
3. Clean out any dust or debris inside the battery compartment, and then re-insert the battery into your camera.
4. Power your camera on without the memory card installed.
5. Take a picture.
• If your camera takes a picture, re-install the memory card, and then go to Step 6.
• If it does not take a picture, your camera requires service. To set up service, click the Create Online Service Request button below.

1. Format the memory card in the camera, and then take another picture.
Important: Formatting erases all pictures and other data from the card. If you have pictures on the memory card you want to keep, download those pictures to your computer before you format the memory card.

• If your camera does not take a picture with the formatted memory card installed, replace the memory card.
• If the issue still persists after you’ve installed a new memory card, your camera requires service. To set up service, click the Create Online Service Request button below

Ok you need to buy a DS memory card and insert it in camera ( this camera has very little bultt in memory( a $14.00 card will get you hundreds of pictures!) Please rate! this keeps this site free
thank you!

Try reformatting the camera. Take the memory card out first or else you might lose all your pictures.

you need to download the pictures off the camera. Once they are downloaded and erased from the camera, you'll be able to take pictures again.

some camera's are like that. but i found out when taking the picture click once fast then click twice and hold it down. try that let me now how you went

You may still be able to take pictures with your black screened Kodak camera. This problem occurs in the line of Kodak EasyShare digital camera models.

When you turn on your Kodak EasyShare digital camera, turn off the LiveView function. Take a picture using the small-windowed viewfinder (this is not the LCD screen). Also, try zooming in and out.

After taking a picture, review the picture to see if the picture has been taken. Then turn on LiveView and occasionally the LCD screen should no longer be showing a black screen.

cannot take a picture the lcd is on blank screen

This could be due to a jammed lens element preventing the camera from focusing properly. When you push the button the camera attempts to focus the image before it takes the picture. If the focus component in the lens is not moving properly it cannot focus and thus will not take the picture. Do you see the camera attempt to focus the image when you press down the button? If it does not make any noises when you push the button, and the camera does not attempt to focus the image then it is most likely a jammed or malfunctioning focus motor. This would require professional repair.