Question about Samsung LN-S4692D 46 in. LCD HDTV

1 Answer

Samsung LNR408DX/XAA Powers on with sound but no picture

The TV powers on, can hear the relays clicking, The led on power button blinks 4 times. There is sound but no picture, the Screen backlighting is on but there is no picture and no on-screen display... is the same power board problem others are having ??

Posted by on

  • David Friedel Feb 25, 2009

    I have the same problem with the same Model #. This is the second one I have seen like this. On the first one, the main board was replaced but the problem still exsists. It's hard for me to believe the power board would be bad because all the voltages seem to be present. Is there a timing control board on this that could cause the problem? If so, does someone have the part #. This problem has to have been solved by now, the first one I spoke of was seen about 6 months ago, now I have another one, and I see multiple threads containing the same failure mode but no confirmed fixes that I can find. HELP!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 98 Answers

I think you need to exchange the Main Board.

Posted on Feb 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture, when powering up the light will turn yellow, them the t.v powers up and can hear sound but no picture, and then hear a click and light flashes green.


First turn on,do the power LED light stable?Few sec.Power LED and LED OPC flashes?This very common on Sharp tv,tries power off/on at 4 or 5 each time it flashes,well power up have backlight on and it work.After this doesn't work than ur Tuner Signal board it dead.

Feb 03, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Samsung model LNS4051DX/XAA won't turn on, just clicks


THE PROBLEM IS Faulty parts on PS board , bad press for Samsung

Because the Samsung LNS4051D would not turn on and the power LED would blink 4 times and the relay would click and this would repeat again and again. I replaced power supply board parts CM806, 811, 812 & 817, all 1000 uf 10v capacitors, three had their tops bulged up slightly that I missed on initial visual inspection. After seeing the reports of problems with these caps on http://www.fixya.com/support/t1336881-will_not_turn_or_off , I replaced them with Radio Shack part 272-1032, 1000 uf, 35v. They are slightly bigger, but fit OK. TV is working fine now. Cost was 4 x $1.59 = $6.36 plus the time. I saved between $100 to 300 in the process of either replacing the board or getting the unit serviced.

Nov 06, 2008 | Samsung LN-S4051D 40 in. LCD Television

7 Answers

Samsung LNR408DX/XAA Wont power up


I had the same problem with a 52" Samsung LCD. I found 2 electrolytic caps with bulging tops on the power supply board. (see pic). I looked to be the 5v section but I'm not sure. I got replacement at Fry's for $1.90 each. All is well!
Ahwatukee Al

ff0cf58.jpg

Mar 07, 2008 | Samsung LN-S4692D 46 in. LCD HDTV

1 Answer

No picture


Self test: Turn on and Press the input and menu buttons on front panel together and hold for 5 sec. after 5 sec the power LED will blink a 2 digit seq. This will let you know what error code. Count the first blinks then a short pause then the second blinks. Example 2-3, 3-4, 4-1. Let us know what it is.

Dec 05, 2007 | Mitsubishi WS-55807 TV

Not finding what you are looking for?
Samsung LN-S4692D 46 in. LCD HDTV Logo

1,244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71608 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1646 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...