Question about Thomson Lands Phones

Open Question

The GE dect 6.0 model#27909EE1-A receives in-coming calls but the caller can not hear my response. I have re-placed the battery problem still exists

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 193 Answers

SOURCE: Callers can't hear me but I can hear them

change the channels on the phone and reboot it

Posted on Oct 09, 2007

  • 1 Answer

SOURCE: GE MODEL 28112 DECT 6.0 CORDLESS PHONE

I contacted GE today and they told me how to get the caller ID to work on the additional handsets. You must follow these steps in the exact order given.

#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes.

reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in. It takes about another 10 minutes after that before all phones start recognizing caller ID but it now works fine.

Posted on May 30, 2008

  • 1 Answer

SOURCE: GE DECT 6.0 GHZ cordless fone (model 28111) don't ring

There is a Do Not Disturb button on the base unit. Press it to turn the feature on and off.

Posted on Jul 09, 2008

  • 218 Answers

SOURCE: I have a GE 27909EE1

Here's a link to the manual for the GE 27909EE1 Dect 6.0 phone on the manufacturer's website. You can download it free and print it if you wish.

http://www.home-electronics.net/ge/pc/IB/27909EE1_IB.pdf

Posted on Dec 02, 2008

  • 1 Answer

SOURCE: new ge dect 6.0 phone receives calls but won't ring out loud

I had the same problem and it persisted for a few days. Once i sat down and found the manual at ge's home electronics website, the problem was resolved. This is a little embarasing because it's quite an easy fix. my phone handset was displaying a musical note with a line through it. This is to show that the "Do Not Disturb" function is enabled. There is an illuminated button on the base that says do not disturbe.... i hit the button and the ringer works again. If you had the same problem, you are not alone my friend. Time to double our ginko intake for the day. *laugh*

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We cant hear the person calling in


does it have speaker phone option .

Apr 08, 2016 | Uniden DECT 6.0 Cordless Phone

2 Answers

Wish to stop unwanted calls


That can be difficult, since even if the phone itself or your carrier has call blocking capabilities, most of the nuisance callers have many different numbers that they can use to call from, and will simply change to another one if you block one. The best solution is to have Caller ID, and any call that blocks their number, or any number that you don't recognize or expect a call from, simply don't answer it. That is the most effective way to stop the calls from coming, since they will usually move on if they receive no response.

Dec 18, 2015 | Uniden D1680-2 Expandable DECT 6.0...

1 Answer

My panasonic KX-TG5000 phone headsets cannot make or recieve outgoing calls and the intercom function is gargly.


You need to reset the menu once again as it is possible that the phone had hung up as there was LINE PROBLEMS . Once this was reset the CLIP facility came back. So if you can once again remove power battery and keep aside to reset , then start all over to set up the base and slave units to MESH , the intercom and line facility must work.
You can remove the battery from the slave remote units to reset.

Oct 20, 2011 | Panasonic KX-TG4500 Phone

1 Answer

Not receiving incoming calls was talking to my


I used to have this exact model. More than likely, your battery has become "unrechargable". I used to buy replacement handset batteries from ebay every 6 or 7 months. After 3 years, I finally got rid of the phone and purchased a nice Panasonic (just cheaper these days!)

The replacement batteries usually sell for $3 or $4 on ebay. Here's a link of one that's one now: http://cgi.ebay.com/Battery-V-TECH-IP8300-DECT-6-0-89-1326-Cordless-Pho-/330486596555?pt=LH_DefaultDomain_0&hash=item4cf28943cb

Thank you and good luck!

Mar 21, 2011 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

Hello i have a ge 28118 series slim dect


My phone is making a lot of noise and static on in coming call so bad I can't talk. out going I can't make. I put in the number to dial call does not go through ,but I can hear the dial tone. do I need a new battery or is there something wrong with the phone itself.

Jun 27, 2010 | Thomson GE-28115FE1 Cordless Phone

1 Answer

One ring - noise like fax to caller, phantom call to receiver


Try unplugging all sets and call in. Do you still have a faxlike tone, like from an ALARM system or something else down the street?

Aug 21, 2009 | Uniden DECT 6.0 Cordless Telephone...

2 Answers

Heavy Static on phones. Can't hear caller. No caller ID


Room monitoring mode is basically a type of Intercom.


Press the *TONE/exit button on the handset to exit room monitor mode.

I will provide you with link to the user manual of the phone. Have a check at it. Might be useful.

http://www.home-electronics.net/ge/pc/IB/28112EE1_IB.pdf

May 30, 2009 | GE 28112 Trio Cordless Phone

1 Answer

Rotary tone on GE 6.0 cordless phone won't turn off


From the Handset Setup Menu:
1. Press the caller ID-volume ( 5 or 6) button to scroll to the TONE PULSE sub-menu.
2. Press mute/program button to enter the menu. TONE/PULSE 41TONE 2PULSE shows in the display. The default setting is “1 TONE”.
3. Use the touch-tone pad or caller ID-volume ( 5 or 6) to enter 1 TONE or 2 PULSE.
4. Press the mute/program button to confirm. You will hear a confirmation tone and your selection shows in the display.

Feb 06, 2009 | Uniden Cordless Phone

2 Answers

I have a GE 27909EE1 Dect 6.0 phone and cannot find the manual. I need instructions in order to program it.


Here's a link to the manual for the GE 27909EE1 Dect 6.0 phone on the manufacturer's website. You can download it free and print it if you wish.

http://www.home-electronics.net/ge/pc/IB/27909EE1_IB.pdf

Dec 02, 2008 | Lands Phones

3 Answers

Vtech cordless phone appears to be mute


Try the "hard reboot". /1/ Unplug power from base station. /2/ Disconnect battery in each handset. /3/ Wait a few minutes. /4/ Reconnect battery. /5/ Re-plug-in power to base station. /6/ Place handset in base station, and wait a few minutes for it to recover.
You may have to reset time/date and/or the handset ##.

Aug 24, 2008 | Vtech 9009111 Cordless Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Thomson Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Are you a Thomson Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...