Question about GE 25880 Twin Phone

1 Answer

Help! Re-recording message

Help!! We use this at a medical office. Someone inadvertently erased our Answerer message, and we can't find the manual, and don't remember how to re-record a new message. HELP!!! -Denise

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 74 Answers
Re: Help! Re-recording message

Following are instructions for the GE25881 phone which is similar to your 25880. Hopefully this will work for you. -Vish Answering System Set Up This section shows you how to set up your answering system to receive incoming calls. Before you begin the setup, you must turn on the answering system. ? Press the conference/ans on/off button to turn the answering system on and off. NOTE: The display shows ANSWERER OFF when the answering system is off. The default status is on. Voice Instructions If you need additional assistance, press and hold the memo button on the base and follow the voice instructions. 12 Answering System Operation Recording the Outgoing Announcement For best results when recording, you should be about nine inches from the microphone, and eliminate as much background noise as possible. 1. Make sure the answering system is ON. 2 . Press and hold the announce button on the base while you record the announcement. 3. Begin speaking after you hear the beep. 4. Release the button after you finish your announcement. If you choose not to record an outgoing announcement, the default announcement plays. To return to the default announcement after you have recorded your personal announcement, press the delete button on the base while playing the announcement, or press the announce button and release it when you hear the beep.

Posted on Jul 24, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hi-Our GE spacemaker phone will no longer record messages when someone attempts to leave a message. The phone will just ring and never attempt to record. It was working fine for until recently. We have...

Apparently you have the answering machine turned off.
When speakerphone is OFF (not in TALK mode), press flash/program button and CID VOL(+) / CID VOL(-) arrow keys to move the pointer > to point at ANSWER ON/OFF, press flash/program button to show SET ANSWERER ON OFF.
Use the CID VOL(+) / CID VOL(-) arrow keys to select ON.
If you need one, you can download the manual here.

Feb 09, 2011 | GE Spacemaker 26976 Cordless Phone

1 Answer

Need to delete old voice message, can someone help

Erasing Messages

The unit will announce the remaining recording time after playback, if it is less than
5 minutes. New messages cannot be recorded when:
— “Memory full” is heard.
— “ ” is displayed on the base unit.
— ANSWER ON indicator flashes rapidly (only when the Answering System is on).

Erase some, or all, of the messages in a mailbox. We recommend you erase unnecessary messages after each playback.

Erasing a specific message
Press [ERASE] while the message you want to erase is being played.
• A short beep will sound and the unit will continue to play the next message.
Press [ ][4] while the message you want to erase is being played.
• A short beep will sound and the unit will continue to play the next message.

Erasing all messages in the mailbox
1. Press the soft key ( ).
2. Press the soft key ( , or ).
• If Mailbox 2 or 3 has a password, enter it (p. 51).
3. Press [ ][5] to erase all messages in the mailbox.
• A long beep will sound and “Mailbox (No.)” and “No messages” will be heard.
• To end remote operation, press [OFF].

I hope you rate this solution. Thank you and goodluck!

Aug 05, 2009 | Panasonic KX TG5100M Cordless Phone

1 Answer

How do you record a greeting

CLICK HERE for your owners manual in PDF format.

See Recording a greeting pg. 47 (45 actual)

Thanks for using FixYa - a FixYA rating is appreciated for answering your FREE question.

Jun 03, 2009 | Uniden EXAI378I 900MHz Phone w/ Digital...

1 Answer

Message Box is full. How do I erase?

Erase Messages
Single Messages
You can erase a message itself, leaving the Caller ID information.
• While the message is playing, press and release DELETE. The unit erases the current message and announces, "Message erased."
All Messages
You can also erase all the old messages only, leaving the new messages and Caller ID information.
While the unit is in ready-to-answer mode, press and hold DELETE until the unit announces, "Messages erased."
• New messages can not be erased in this way. To erase new messages, play them then press DELETE during play back.

Here is a link for the manual for your phone:

Good luck!

Apr 26, 2009 | GE 29897GE1 Corded Phone

1 Answer

Delete messages

This is from the manual.

Erasing Messages
You may erase messages in the following three ways:
To erase a message while it is playing
1. Press and release PLAY/STOP button.
2. Press the review and skip buttons to select and play the message you want to erase.
3. Press the delete button, the current message is erased, and the next message plays.
To erase all previously played Messages in a mailbox
1. Make sure the phone is OFF (not in talk mode)
2. Press and hold the delete button until "ALL OLD MESSAGES ERASED" is announced.
To erase a message from the handset :
1. Press the flash/answerer button on the handset
2. Press the play/stop (key 2) on the handset.
3. Press the erase (key 0) on the handset to erase a message during playback.
NOTE: Erased messages cannot be restored.

Jan 08, 2009 | GE 28112 Trio Cordless Phone

1 Answer

Help! Re-recording message

1. Answering system ON.
2.Press & hold ANNOUNCE button while you record up to 2 minutes.
3. Release ANNOUNCE button when through recording.
4. Press & release ANNOUNCE button to hear new message

Aug 25, 2008 | Uniden Cordless Phone

1 Answer

Cordless Phone

You did record a message on the answerer, didn't you? Mine displayed that until I recorded the outgoing message for the answerer. You do not need any service from your phone provider. The answerer in the base unit simply records the caller's message when you don't answer after a set number of rings. The manual tells you how to name the handset, which is a nice feature if you don't wish to use "unit 1, unit 2, etc".

Aug 28, 2007 | GE 28112EE2 Cordless Phone

Not finding what you are looking for?
GE 25880 Twin Phone Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts


Level 3 Expert

93861 Answers

Cindy Wells

Level 3 Expert

4720 Answers


Level 3 Expert

56798 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides