Question about Kenmore 24032\24036 Top Load Washer

1 Answer

My kenmore washer will fill up and start the wash cycle but that is it. It will not do anything else, drain or spin or rinse.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

I think your pump may be blocked especially if you washed rugs or blankets recently. Check the pump. Hope that helps.

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kenmore compact washer with dryer on top, will not go from the first wash-rinse-drain-spin cycle to the second rinse-drain-spin-off cycle.


Check and make sure the door is pushed all the way down until you hear a click. If it starts with the next cycle, then your door switch may be bad. It's a pretty easy fix, but I would watch a video at least before doing it yourself.

Oct 09, 2016 | Kenmore Washing Machines

1 Answer

Kenmore model 23832100 washer will not spin in rinse cycle kenmore model 23832100 washer fills, agitates, and drains, but will not spin. Makes noise after draining. BUT if I manually turn off the machine...


Check door switch: If the lid switch is bad it will not drain or spin. Try this test: With lid open let it finish wash cycle. Press lid switch down with screwdriver. Washer should begin draining. Release switch. Motor should stop. Press switch a second time. Washer should start spinning as it continues to drain. If motor doesn't come on while lid switch is pressed, replace the switch. OR
http://www.youtube.com/watch?v=q942xn_2VXY

Mar 30, 2013 | Washing Machines

1 Answer

Kenmore washer stops spinning a few seconds in to the cycle.


Sounds like the brushes are struggling to get enough power to the motor to spin. Renew motor brushes

Apr 21, 2012 | Kenmore Washing Machines

1 Answer

Kenmore washer doesn't drain


This is likely a pressure switch issue.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 27, 2009 | Kenmore Washing Machines

1 Answer

Kenmore front-load washer stops at rinse cycle


When the washer initially fills for the wash, is it only hot water entering the drum? Try switching the water temperature between hot and cold as it fills. If any of them show little or no water getting through, it sounds too easy but check to make sure water supply taps are on, and that the cold/hot fill hoses aren't reversed. Remove the fill hoses and check any of the screen filters for blockage (in the hoses and in the inlet water valve). When the machine stops and waits to fill but all you hear is a hum, it sounds like there is power going to the valve but water is not able to get through it.
Good luck!

Mar 03, 2009 | Kenmore 43142 Front Load Washer

2 Answers

98702 Washer Drain/Spin Dead.


My Kenmore 98702 washer Fills and agitates as expected but stops at the end of cycle failing to drain or spin

Dec 05, 2007 | Kenmore 98702 Stacked Washer/Dryer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...