New filter for sanyo aero air cleaner model ABC-E1SH

products.sanyodenki.com/en/contents/hp0138/list.php?CNo=138

According to the Owners Manual, here's what you need to do,

1.Turn the air cleaner OFF and unplug it from the power outlet.

2. Carefully lay the unit down on a flat surface with the Front Grille facing up.

3. Gently push in on Release Buttons on both sides of the unit, pull Front Grille out and away.

4. Remove and discard used HEPA filter.

5. Remove any plastic protective wrapping and from the new HEPA filter.

6. Set new HEPA filter into the air cleaner.

7. Install the Front Grille by engaging its tabs into the bottom slots on the unit. Then swing grille up and gently push in top to snap into place.

8.Turn the Air Cleaner upright and plug it into an outlet for
operation.

Hope this helped you. Please let me know. Thanks

not likely the electrostatic air cleaners are discontinued for the most part because the really didnt do all they claimed. you can achieve much better air quality from a standard media air filter with a merv rating of 10 or better.

buy a new machine on a super sale deal

fyi

Holmes offers its Holmes Odor Grabber HEPA-Type Air Purifier, model no. HAP223-UC2, together with three Holmes HAPF22 Hepa Filters for $29.97 via the directions below. With free shipping, that's $30 off and the lowest total price we could find for this bundle by $33. Recommended for use in room up to 20-square feet, it features air purification and deodorizing. To get this deal:

1. Add three Holmes HAPF22 Hepa Filters to your cart for $29.97
2. apply coupon code "H0PVGRAB3" to add the Holmes Odor Grabber for free

Try: airfilters.net

I have an kenmore air purifier and cannot locate where to find a replacement filter or manual for it? Can you help. It is Model # D42M32957

I just bought the same model and also have the smell. My previous one did not so I returned the first unit and the second units smells the same. I called Sears Customer Support and they told me that it is probably due to the factory smoke test they do on each unit. He said let it run for a few days and it should dissapate. I went a step further and am trying a new filter and if this works he said call the store and they will get me a new filter.

http://www.totalvac.com/HAPF600.html?zmam=6843742&zmas=1&zmac=6&zmap=HAPF600

You can actually use the size B....made by Holmes...Also C for the carbon filters

http://www.filterqueen.com/pdf/defender.pdf hope this helps :)