Question about Washing Machines
You can note all the German words which can be easily referred to in the online translation site
Click on : German to English
Now for every corresponding word on the panel you can write on stickers to be stuck to the position.
I am sure this must solve your issue.
Posted on Jan 24, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Does the water flow when you have it on warm or cold settings? If on warm setting and water flow is cold, its probably the mixing valve. This part isnt that expensive, and not that hard to replace. Remove the two front console caps, remove the two console hold down screws then flip the console out and then over the top. You will see two gold cabinet hold down clamps, pop them out, the lift the whole cabinet off the unit. You will see the mixing valve right where the inlet hoses connect to the machine. Let me know if you need further help.
Posted on Oct 17, 2007
Main wash light flashing is a heating fault. You either have a faulty temp sensor (NTC) or the pressure chamber has blocked and the heater element has popped.
Posted on Feb 08, 2008
SOURCE: MAH8700AWW - No Fabric Softener
Not sure if you've ever resolved this issue, but I'm dealing with it myself. I have come across this service manual that gives a very detailed illustration of the systems, how it works and how to test it.
Focus on pages 15 thru 25. Hope this helps you.
Posted on Dec 08, 2009
The I is the pre-wash and the III is the main wash where you put the soap powder. the # star looking symbol is the fabric conditioner.
If you don't have a manual you can download this from the miele website.
Posted on Jan 18, 2010
Testimonial: "Thanx for the help. I managed to get my first wash very successfully. "
Hi there are 3 possible causes.
1. Out of balance load (drum is divide into 3 sections if weight i one section is greater then 1.25kg than another section will not spin)
2.Carbon brushes ( Normally good for at least 10 years)
3. Vent from drain pump blocked.(Vent left front side of soap drawer. Visible when drawer removed)
Posted on Mar 30, 2010
Tips for a great answer:
Jan 02, 2015 | Televison & Video
Jan 03, 2013 | Washing Machines
Aug 10, 2012 | 2006 Toyota Avensis 2.0
Jan 10, 2011 | Siemens Ovens
Dec 20, 2010 | Acer Aspire One Netbook 8.9" Notebook
Jan 06, 2010 | Watches
Dec 23, 2009 | Franklin Office Equipment & Supplies
Sep 21, 2009 | HTC P4350 Smartphone
Apr 12, 2009 | Tomtom Go 700 Portable GPS Receiver
Jan 28, 2008 | Neff H5642 Convection / Microwave Oven
Nov 24, 2017 | Neff Washing Machines
65 people viewed this question
Usually answered in minutes!