Question about Schwinn Wide Ride Pedal

1 Answer

Stepmill 7000 wont regulate speed

I have a stepmill 7000 that I can not regulate speed, it seems to grab momentarily then keeps speeding up until you cant keep up

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 49 Answers

Check the blue wire to the alternator. Check all connections. the blue wire is the tach wire. no tach signal and you cant climb fast enough!

Posted on Sep 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you fit a new belt on everlasting 410 exercise bike we cannot seem to get it inside


Without seeing this model I can tell you that just taking the pedal off wont be enough. You will have to take off whatever is keeping your from looping the belt. This could be popping off the crank or taking the wheel off itself.

Jul 04, 2016 | Exercise & Fitness

1 Answer

How do a Refit the Chain onto a 7 Speed Malvern Star Bike


Ok, I have purchased New Chain for this Malvern Star that I was given and doing it up for the Grand Kids, as it did not come with a Chain and has 7 Gears, on the Main Cassette, and also on the Main Pedal, I am having trouble of how it goes on to the Bike, as it is a bit out of my league at 62.

Feb 24, 2015 | Exercise & Fitness

1 Answer

Where is the serial number on a rand la cruisin bicycle?


you will probably find your serial number on the bottom left or right side of the bottom bracket the place your crank is located on most bikes and on the rare occasion on the rear where your wheel attatches

Aug 01, 2014 | Exercise & Fitness

1 Answer

Panel will not light up.new battery did not help


On C846 version 1 units, set the on/off switch in the "on" position. It will be necessary to start pedaling for the bicycle to "power up".

For any other units, we recommend checking for any loose, crimped, or visually bad wires.

Make sure the speed sensor on your bike is working.
You can run a quick test by using a magnet to swipe in front of the sensor to see if it is sending signal to your console.

For any further troubleshooting please do no hesitate to call our Tech Support Team 888-713-2880

Or check us out online

https://www.sportsmith.net/

Jan 30, 2014 | Precor Exercise & Fitness

1 Answer

Unit pauses workout while riding


The speed senor may need realignment or may be busted. Adjust or replace the speed sensor. You can get parts at treadmilldoctor.com or usedtreadmillrepairparts.com if you looking for used.

Jan 01, 2014 | Schwinn 250 Recumbent Exercise Bike

1 Answer

Schwinn srb 1700 will not read the speed or RPMs and the unit turns off after 5 minutes by itself. I was thinking of replacing the sensor but I can not find the part online. Any help would be great.


please see the video and lube the rollers bearing front+back too
2) Run the software calibration for easy diagnostic with sensor speed.and fix it.
Steps for Newer Style Console Calibration
1. Locate the calibration area on the rear or underside of the console (a hole, near the console's center, that goes through to the electronics board. (This hole should not have a screw in it.)
2. Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).
3. Press the button 2 times (with the pencil eraser). The first click should show CL11 in the console, the second click should show CL21.
4. If the process was done correctly, and CL21 appears in the console, you are in "calibration mode." The next few steps consists of pressing buttons on the console and observing settings. This will not require any other tools.
5. Press ENTER. CL22 should display in the TIME window and (??) in the SPEED window.
6. Press ENTER. CL23 should display in the TIME window and (??) in the SPEED window.
7. Press ENTER. CL24 should display in the TIME window and (??) in the SPEED window.
8. Press ENTER. CL25 should display in the TIME window and (??) in the SPEED window.
9. Press ENTER. CL26 should display in the TIME window. You should then see the letter "E."
10. Press ENTER. You should see "SS" or "55" in the console.
11.Push the STOP/START button. For safety, at this point, you should step off, or be off, the treadmill.
12. Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own.
13. When the belt stops, the incline should self test by raising to its highest incline position, then lowering back down to its lowest position.
14. Once the incline test is complete, push the POWER button 2 times. The unit should shut off and the console should go completely blank. If this happens, the treadmill is done calibrating and is ready for use.
If the letter "F" appears in the SPEED or INCLINE window when the power button is pressed 2 times, the treadmill is indicating a failure somewhere either in the SPEED or INCLINE (depending on the window the "F" appeared in). Troubleshooting the failure would be the next step.
God bless you

Oct 01, 2013 | Exercise & Fitness

1 Answer

Body Sculpture BC1510 Exercise Bike need manual


Hi,
How to use the counter speed mode ?
It is not stoped to scan. Stop is always displayed in the left corner.
Regards
My email: tooyoung laposte.net

Jul 14, 2013 | Exercise & Fitness

1 Answer

Stairmaster 3800 Display screen reads "CONFIG


Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD
Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD

Feb 07, 2011 | Stairmaster 3800RC Recumbent Exercise Bike

1 Answer

Bike reads configuration required


Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD
Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD

Feb 07, 2011 | Stairmaster 3800RC Recumbent Exercise Bike

Not finding what you are looking for?
Schwinn Wide Ride Pedal  Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Schwinn Exercise & Fitness Experts

Steve

Level 3 Expert

3287 Answers

David Payne
David Payne

Level 3 Expert

13781 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

286 Answers

Are you a Schwinn Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...