Question about Desa International GWP20T GLOWARM Wall Mounted Panel Heater
Pilot will lite and heater lights then both just go out
It seems that your heater is not sensing the flame is lit and is shutting gas supply off. There should be what is called a flame sensor, it is a thin pc. of metal that sticks out into where the flame when lit.
This usually gets charred and dirty, if you unscrew it and clean it with a soft cloth then re-insert it, it will get you by. You should get a new sensor when you have a chance.
Good luck and be sure to disconnect from any power source or turn unit completely off when orking on it.
Posted on Jan 28, 2009
Tips for a great answer:
Jan 19, 2016 | Heaters
Nov 12, 2012 | Desa International Blower Glow Warm Wall...
Dec 06, 2009 | Desa International Blower Glow Warm Wall...
Jan 18, 2009 | Dyna-Glo D-E37 Wall Mounted Panel Heater
Nov 19, 2007 | Rinnai Desa Vent-Free Infrared Gas Heater:...
355 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: