Question about Phones

1 Answer

Can not get phone to ring. The screen lights up and can see a call coming just now ring

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Go to manual and check out how to set ring volume

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I inhrited this system and have nothing on it. all of a sudden it wont ring at either of the two phones. It shows a flashing green light that a call is coming in and you can answer it but if your noy...


To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down, enter #20 the screen should say MMC DISABLED
enter in 1 2 3 4 1 # (that enables programming)
enter in #62 the screen should say day ring assn
press the line you wish to program
press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
press # when finished with the line
repeat steps 2 through 5 for the remainder of the lines you wish to change
press # when finished.

Jul 30, 2010 | Samsung Prostar 816 Phone

1 Answer

I work for a small non-profit organization and we have a Lucent phone system - the problem is that when ANY call comes in on the mail line - it rings on everyone's phone. How can I fix this so that it...


Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming2_bing.gif.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Dec 18, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

Hi, When the phone rings into the office my phone is th eonly phone that doesnt show on what line the call is coming in to. One of the other phones is fed directly from mine and it shows it perfectly


This is probably something that requires a technician unless you're familiar with ICD groups. The lines appear on buttons and your phone probably lights with a solid red light to show the line is busy, but you can't pick it up. By default, ICD code 600 is ring group 1, but you have to get access into SYSTEM programming to add your extension to it. The ring condition, immediate, no ring, or ring delay x rings is also part of the programming.

Carl

Sep 30, 2009 | Panasonic KX-T7630 Corded Phone

1 Answer

I have Comdial 7260-00 that has stopped ringing all of a suden. It stiil shows that I have an "Incoming Call" on the screen and the red light lights up. How can I get phone to ring again??


if u never droped it then go through the instruction book about ringing on or silent, if u do not have try to download it via google help

Jun 19, 2009 | Comdial 8324S-PT Corded Phone

1 Answer

The phones won't ring when calls are coming in. The lights on the phone light up but there is no sound


Uh oh, I just saw this. Is it in the main board 101-108 exts, or one of the expansion boards?

Ringing is set 3 ways, by the switch on the side of the phone, by programming, by features. First, make sure the switch is in the ring position and have someone call you on the intercom. If it rings, have someone transfer an outside call to you. If it rings, try dialing 790 on the intercom to reset station features. If none of this works, It's time to look at ring programming. It's done from the system programming mode at the main phone or from a PC. It's program codes 408-410 or section 3.2 from the Maintenance console.

The last ugly thing is it's a hardware failure.

Carl



Apr 29, 2009 | Phones

1 Answer

Samsung prostar 816 plus system ringing problem


sounds like your having a couple of problems at the same time. the lines only ringing at station 1 is the default setting of the system my guess is that the time and date are also way off if thats the case.
To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished.

next, the problem with the cordless not working has to do with the port programming, in default it assigns all ports as multiline sets.
To assign a SLT(single line telephone) port to the system while still in program mode dial #38 the screen should say slt dial type and then 16 0's.
0 = keyset 1=slt set
enter in all 16 digits followed by the # i.e.if your cordless is on port 7 it would look like 0000001000000000 #
lastly the phone that can no lnger recieve calls sounds like the do not disturb or DND has been pressed to stop the alarm from ringing. press the mute/dnd button (light should be off). to cancel an alarm press the ALM/SD button twice and then the hold button.
hope that helps out.

Mar 05, 2009 | Samsung Prostar 816 Phone

1 Answer

Some phones light up but there is no ringing...


is the ringging assignment setting
means downstair phone been set for incoming ring, so u can see the indicator ligh on and ringging
up stair dint assign a incoming ring so that u only can see the indicator light always blinking w/o ring...
contact yr phone provider to set the ringging assignment

Feb 24, 2009 | Toshiba DKT-2020 Corded Phone

1 Answer

Stop ringing at certian phones when outside calls come in.


http://dstech1.com/programming-line-ringing/


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist's extension to Immediate Ring and the lines at the users' extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users' extensions -with the receptionist providing backup -set the line at the users' extensions to Immediate Ring. Then set the line (or lines) at the receptionist's extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist's extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Jan 09, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

LINE 3 RINGS ON ONE PHONE- AND DOES NOT RING ON THE OTHER 3...


You will have to get into the programming mode and change Memory Block 4-01 for the port of each phone you want to ring. The corresponding light for the button is OFF for no ring, GREEN for ringing, and RED for delayed ringing.

Jan 28, 2008 | NEC Electra Professional ETW-16DC-2

Not finding what you are looking for?
Phones Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...