Question about HP PSC 1350 All-In-One Thermal Printer

2 Answers

HP 1350 psc all in one have all lights flashing and E flashing on copies nothing works is this some kind of code or unfixable, any idea,s will be much appreciated

Posted by on

  • 5 more comments 
  • Nelson3brats Feb 03, 2009

    I have the same problem - "E" showing on the screen and lights blinking check paper - I have tried everything but can not get the error to go off and it will not take the paper in. HELP please

  • bobsmith1952 Feb 11, 2009

    Same

  • stufffff Feb 19, 2009

    yeah, i have the same problem, and the computer is telling me that i have a printer misfeed.. wtf? i hate this printer

  • maddchess Apr 07, 2009

    i also have the same problem orange light is flashing and there is a E in the copy box , when i run it from the scanner wizard ,it says its in use by an other program ,tried al lot of way to make it work but did not manage and the scanner button also does not work ... and the ink is finnish but doesnt mean i cant scan ,does it ?i use xp home and downloaded the drivers from the internet hp.com please any ideas ... many thx


  • maddchess Apr 07, 2009

    i have the same problem at the moment only when i unplug the machine and replug it flashes lights and looks like its going to work and then it comes back to the same ,orange light and big E in the copy box ,i use xp home and downloaded the drivers from hp.com ... any ideas thx

  • maddchess Apr 07, 2009

    i also found that the on/off button and thcancel gave some effect but didnt seem to fix it hmm any help appriciated
    thx

  • stufffff May 11, 2010

    yuh i did that, it worked once, and then the problem occured again

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Unplug the power and plug it back in. Stupid but it works.

Posted on Feb 20, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Doh!!! That worked (pulling the plug out). I can't believe that I didn't try that by now.

Posted on Feb 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp 1350 does not copy


Hi Steve,

Does the printer give you any error message ? the best you can try on HP PSC 1350 is, Remove the cartridges and clean the electrical contacts ( golden points ) on the cartridge and put the cartridge back in. IT should go thru alignment process. IF it does not go, It should display some error. I hope the cartridges have ink in them.

Regards,
Suhail

May 14, 2012 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

All lights flashing on HP psc 1350 printer


Resetting a Hp printer means switching off the machine, removing the cartridges, disconnecting the usb cable and the power chord, leave it off for few minutes then restarting it again without usb cable connected to it and without cartridges installed. You need to press the power button while it boots up. Leave it one for few minutes and again turn it off. Reinstall the cartridges and plug in the usb cable, again Power On the printer. That's all.
But there's another thing when you say all lights are blinking/flashing, there is chance that there's an internal faulty. Clean the cartridges contact point and the contact points on the printer. If possible, clean the printer thoroughly, including the waste ink tank. This will let you help find out the culprit.
Good luck.
Thanks for using FixYa.

Jun 20, 2010 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

We have a 1350 all in one printer, it will not print on my laptop computer. I downloaded a HP 1350 and it configured to the printer; a.the 1350 does not show up on the control panel b. when I want to print...


did you try re-install the software sir? the dell laptop of your wife has the same driver installed for your printer? may i ask also sir by printer what kind of conenctivity you use? is by local area network or directly conencted to your laptop?.....please verify sir if you have properly install your printer software toyour laptop.

Oct 08, 2009 | HP PSC 1350 All-In-One Thermal Printer

2 Answers

Ink cartridges stuck after replacement


HP PSC 1350.

Very sensitive printer. Due to dust, the catrdges are getting stuck at right side. Please clean the steel roller where the catridges are rested. Clean it with nice cloth and if possible put 3-in-1 oil in that area only for the smooth flow of catridges in that steel stem or roller.

This might happen iif we are not installing the orignal and genuine catridges and there is a chance of ink gettng leaked onto the printer.

Kind advise is if the printer is old, please put an annual maintenace service contract with local authorized hp Printer Dealer which will solve your problem once for all.

have a nice and good working day.

Jul 16, 2009 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

Hp psc 1350-v won't scan


http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00809848&cc=ww&lc=en&dlc=en&product=|pm_support_oid|&dlc=en&lang=en?product=306888&lc=en&cc=us&dlc=en&lang=en&cc=us&os=2093

Mar 31, 2009 | HP PSC 1350v All-In-One InkJet Printer

2 Answers

HP psc 1350 all in one printer


Look on your desktop for HP director ( could be another name but will say HP). If you don't see it on your desk, click start, all programs, HP or Hewlett Packard. Click on this and a box will open letting you choose how to scan, where to save it ect. If you have trouble with it you may need the update, here,
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-46104-1&lc=en&dlc=en&cc=us&os=228&product=77361

If this helps plz rate this 'fixya', if you need more help post a comment & I'll be happy to walk you through it, I know how frustrating it can be. Thank you kindly

Feb 21, 2009 | HP PSC 1350 All-In-One Thermal Printer

2 Answers

Hp psc 1350 -check cartridge


Power off switch for a 5 minute .

It doesn't work try to reinstall the printer driver

Or check whether the printer cartridge is fit well in the printer

May 16, 2008 | HP PSC 1350v All-In-One InkJet Printer

6 Answers

Hp psc 1350 printer


i cannot re-install my hp 1350 all in one scanner. i have uninstall and re-install the printer driver was unknown. how can that be possible even i dont have the cd that comes with it.

Feb 02, 2008 | HP PSC 1350 All-In-One Thermal Printer

2 Answers

HP psc check print cartridge light is flashing


The "E" means a cartridge problem.

Have you recently changed them?

If so, did yo use "refills" or another non-HP cartridges?

Jan 11, 2008 | HP PSC 1350 All-In-One Thermal Printer

Not finding what you are looking for?
HP PSC 1350 All-In-One Thermal Printer Logo

Related Topics:

1,879 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...