Hi - just bought a Tivo series 2 dual tuner and want to have the Tivo remote learn the Polaroid LCD tv functions. Tivo lists kust about every manufacturer EXCEPT Polaroid. Any ide where I can find the remote code to add it manually for Tivo?
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: Polaroid TV remote control codes for Tivo
As I understand it, Polaroid TV's sometimes work with the Mitsubishi codes. You may give this a try. You may also e-mail Polaroid direct at www.polaroidelectronics.com contact page to find out what codes should be used (may match a different manufacturer)
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I bought the same TV yesterday and I've used code 1065 to program my sky remote, which worked fine. It's thanks to the answer relating to Mitsubishi and TiVo cos I used a Mitsubishi code!! Hope it works for you.
For some reason your Tivo is tripping the internal breaker of your TV. Check the cables and see that they are not damaged and are connected properly (all the cables that hook up to the Tivo). If you have a spare set of cables, try them to see if the TV still turns off.
I have used a Tivo model 1 for years and love it. But when it cametime for HDTV, I decided to try a "build your own" PVR using SageTV orBeyond TV. I have done so and, to make a long story short, I justbought a Tivo Series 3. Problems with the Beyond TV and Sage TV approaches? 1) Tuner cards with drivers not compatible with running two cardstogether (Dvico). 2) Tuner cards that cannot accept cable cards and so limit you to OTAHDTV and analog cable channels. I now consider this THE major unresoled limitation in trying to build a PC version PVR to compete with a Tivo Series 3) Don't buy Tuner cards without a hardware encoder on analog channels. Thiscauses excessive CPU utilization and can result in stuttering video when recording twoanalog channels and watching a HDTV channel. This with a dual core4200+ghz cpu and this was better than two other MBs I tried. Note: Recently, ATI has introduced the ATI Theater 650 chipset based tuners which ARE reported to have a hardware encoder for analog TV channels. I would recommend this tuner as a starting point for any future PVR build efforts. 4) SageTv has lots of features for "geeks" but is missing lots offeatures.. Such as an easy way to tell the software to pick HDTVchannels instead of non-HDTV channels that are presenting the same program. 5) BTV has a pretty good GUI and good remote controls. Still, itsuffers from stuttering and pixelation when recording two analogprograms while watching an HDTV program. This is really a hardwareproblem (3 above) but I was not able to overcome it at the time. I needed a PCI or PCIe HDTV+analog TV tuner which included a hardware encoder for the analog capture mode. BTV has about the worst technical support of any software company I have ever worked with. But the software works pretty good. Their refusal to give me a "baseline hardware configuration" that they KNEW would work with Beyond TV software and two HDTV tuners should have been a red flag that I was going to have problems. 6) I had to go through three video cards before I found one that would give me dual displays while playing back HDTV. Even so, none of the ATI or Nvida based video cards would allow operation of the TV set as the secondary display. This was a result of the huge CPU load generated when making the HDTV display the secondary display and the computer display the primary. I finally settled for a configuration where I used ONLY the TV display and made it the primary display. So.. After spending three months of elapsed time and about two thousand dollars buying hardware and software to experiment with, I decided to give up and buy the $800 Tivo series 3 PVR withthe $199 lifetime subscription transfer price. Expensive, but I spent considerablymore (and a LOT of time!) trying to get a dual tuner HDTV alternativeto work and .. I failed to come close to Tivo Series 3 features andperformance. Until December 31, Tivo series 1 and 2 owners who have a "lifetime" update deal can transfer this deal to a series 3 for $199. This seems excessive considering that BeyondTV and SageTV give "free" TV Guide service "forever" as a part of their software purchase.. That was one of the attractions to these two software packages. In summary.. A lot of people appear to get BTV and SageTV to operate acceptably in specific applications. A lot of other people have a multitude of problems with their configurations. I simply could not find a combination of hardware and software that would work "without video stuttering under some conditions" with dual HDTV/Analog tuners. The failure of both SnapStream (Beyond TV) and Sage TV to publish even ONE "baseline hardware configuration" that is guaranteed to work under all circumstances with dual tuners makes me very suspicious that such a configuration is unknown at this moment in time. Let
Try this first...Press the TiVo button at the top center of the Remote, then > Messages & Settings > Restart or Reset System > Repeat Guided Setup and then follow the onscreen instructions from there.
This should load your new channel lineup into your TiVo.
If all the channels are still not recognized... Press the TiVo button at the top center of the remote, then > Messages & Settings > Settings > Channels > Channel List and then make sure all of the channels you receive are checked.
Try this: On the Tivo remote press and hold the TV Power button and the Directv/TIVO button at the same time. Hold both buttons down for about 4 seconds or until remote light stays red. Then press the channel up button until the tv turns off. You may press the button over 100 times. You need to go slow. When the TV turns off press the enter button (or select button).