Question about Phones

1 Answer

How do I set the time on my Comdial Edge 120 - Phones

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try this:

DX-80 Time Change Instructions

Software Revision F32 and later

From the attendant station or an phone with attendant password:

1. Press Feature #0 from the telephone dialpad. You will be prompted to enter the Tenant Group

number. This is typically 1, however it can be set for Tenant Group 1-3.

2. Press Save and enter in the attendant password (default is 9999), then press Show.

3. Press the Next option until the display prompts you for the System Time. Press Show.

4. The last 2 digits of the year will be displayed. If you do not need to change the year, press Next. If

you need to change this value, press Chg, enter in two digits for the year and press Save then Next.

5. The current month setting will be displayed. If you do not need to change the month, press Next. If

you need to change this value, press Chg to cycle through the 12 months. When you reach the

appropriate setting, press Next.

6. The display will show the currently programmed day of the month. If you do not need to change the

date, press Next. If you need to change this value, press Chg, enter in two digits for the date and

press Save then Next.

7. The day of the week (Sat - Sun) will now be displayed. If you do not need to change the day, press

Next. If you need to change this value, press Chg to cycle through the days of the week. When you

reach the appropriate setting, press Next.

8. The current hour will be displayed. Press Chg and enter in two digits for the hour in military format.

Press Save and Next.

9. The display will now show the programmed minutes. If you do not need to change the minutes,

press Next. If you need to change this value, press Chg and enter in two digits for the minutes (01-

59). Press Save then Next.

10. You will be returned to the top level off System Time. To exit Attendant Administration, pres

On/Off button twice.

Software Revision F2x

From any telephone:

1. Press Feature # * and enter in your password. (Default password ########).

2. Press Show and enter 08 14.

3. Press Save then Show.

4. The option to change the Year will appear. If you do not need to change the year, press Next. If

you need to change this value, press Chg, enter in two digits for the year and press Save then Next.

5. The option to change the Month will appear. If you do not need to change the month, press Next. If

you need to change this value, press Chg, enter in two digits for the month and press Save then

Next.

6. The option to change the Day will appear. If you do not need to change the date, press Next. If you

need to change this value, press Chg, enter in two digits for the date and press Save then Next.

Printed in the USA Page 2 of 2

7. The option to change the Weekday will appear. If you do not need to change the weekday, press

Next. If you need to change this value, press Chg, to select the weekday, and press Next.

8. The option to change the Hour will appear. Press Chg and enter in two digits for the hour in

military format. Press Save then Next.

9. The option to change the Minutes will appear. Press Chg and enter in two digits for the minutes and

press Save.
10. Press the On/Off button to take the phone out of programming mode.

Posted on Jan 12, 2011

  • Holistica Mar 25, 2011

    THANK YOU SO MUCH....THIS IS THE GREATEST I WOULD HAVE NEVER FIGURED IT OUT WITHOUT U!!!!!!!!!!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My calls go directly to voicemail on edge 120


Normally when calls go directly go to voicemail, there are a couple things why this happens:

- Extension are unavailable/busy
- Call forwarding/Do Not Disturb are on.

If you do have call forwarding/Do Not Disturb on, please consult your user's manual for detail instructions since there are several options for call forwarding (Forward All Calls, Forward Busy, Forward N/A, etc.).

Jul 10, 2014 | Comdial Impact SCS 8212S Corded Phone

1 Answer

How do you check voicemail on the comdial 7260 edge 120?


There should be a voicemail/Vmail button on the phone. From there, you dial in the extension and password.

Jul 02, 2014 | Comdial 8324S-PT Corded Phone

1 Answer

I have a Comdial Edge 120. When a call is transferred to an extension and is not picked up at that extension within a certain period of time, it goes to that extensions voicemail instead of bouncing back...


I'm not familiar wiht Edge terminology, but the idea is you set the transfer recall time to something less than the call forward to voicemail. It means that any calls to voicemail have to be direct transfers and there may be some auto attendant issues.

HTH

Carl

Oct 22, 2010 | Phones

1 Answer

Need to know how to change time on Comdial GCA70-281


  1. Programming the time and date for a Comdial Impact digital phone system must be done from the attendant's station, usually the phone located closest to the Comdial controller. Go to this station before attempting to change the time.
  2. Step 2 set-clock_thumb.jpg Now the phone system's clock is ready to be reset. Without picking up the handset, press the "Intercom" button on the phone. Dial * # 0 1. The digital display2.gif should read "Set Clock"
  3. Step 3 Set the year by dialing two digits (00-99)
  4. Step 4 Set the month by dialing two digits (01-12)
  5. Step 5 Set the day by dialing two digits (01-31)
  6. Step 6 Set the hour by dialing two digits (01-23)
  7. Step 7 Set the minutes by dialing two digits (00-59)
  8. Step 8 set-clock2_thumb.jpg Comdial Impact phone with updated day and time. Pick up the handset and set it back down to set the programming changes. The new date and time should display immediately on all phones connected to the Comdial system

Nov 04, 2009 | Comdial Impact 8124S Corded Phone

1 Answer

HOW DO I GET VOICE MAIL OFF MY COMDIAL 120 PHONES


Hello,

Methinks the welcome message is stored in you telephone set. Try another set, or enter a new welcome messsage. Could it be that the telephone line carries two different lines. Check with you telephone company. Older service may have not been deactivated.

Just a few (possibly farfetched) leads for you to investigate.

Sep 04, 2009 | Comdial Avaya Partner ACS with Voice Mail...

1 Answer

How do i record the main greeting on a comdial edge 120


I just went thru this.
Push the Voicemail button, hit # until it asks for mailbox #, then hit 70 for password. Wait for main menu, then hit 3 for options. Then hit 2 to record your greeting. Now the tricky part,,, I don't know if these are all programmed the same way, but it will ask for the number of the box you wish to change, ours is 800, then follow along.
good luck!

What I'm trying to find out is how you can import a prerecorded message (mp3) as your greeting.

Jan 07, 2009 | Comdial Phones

2 Answers

Setting time/date on Comdial 7260-00


Go to this website and it will give you the instructions on how to change the date and time on your comdial 7260. http://www.vertical.com/media/pdf/comdial_SAB007_DX80.pdf

Dec 22, 2008 | Comdial 8324S-PT Corded Phone

2 Answers

Setting the clock on a Comdial DX-80 Digital phone


To change Comdial phone read out time

feature
#
*
######## (8 pounds)
show
0814
save (System time)
show (Year)
next (Month)
next (Day)
next (Weekday)
change enter what you want to change

Mar 25, 2008 | Phones

Not finding what you are looking for?
Phones Logo

Related Topics:

732 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...