Question about HP LaserJet 2840 All-In-One Printer

2 Answers

Replaced HP LaserJet 2840 catridges and now [?][?][?][?] ! error

The cartridges were not oem cartridges and now printer keeps stating
Install Supplies with the orange exclimation point flashing and the following error [?] [?] [?] [?] [ ] displayed.

put the original cartridges back in (basically empty) and same error message.

Currently waiting on new OED cartridges from supplier.

Posted by on

  • Anonymous Mar 14, 2014

    hp 4250 states "non oem cartridge installed"

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have the same problem, i have replaced all cartridges and it is still stating that i need to replace them all despite showing on the display that they are full. these cartridges are official and infact provided by HP, so the chip thing doesnt make sense in this instance.
I have even replaced a couple of each colour to see if that works but to no avail. it seems to me that there is aproblem with somethign in the printer trying to read the cartridges.
Any suggestions out there?! Thankyou

Posted on Jan 31, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

The OEM cartridges have a chip on them. If the aftermarket supplies do not have the right chip, missing a chip, etc., the machine will not recognize. Placing the old cartridge back in without any toner can give off the same message.

Try rebooting the printer without a cartridge in. Then install the cartridge, either one, and see if that helps. If not, wait for the OEM to arrive.

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed an original Q3971A toner into the HP 2840 laser printer, However there is still a notice to install cyan catridge. Can you help please


PDF]HP Color LaserJet 2840 and 2820 All-in-One for small and ...

h10010.www1.hp.com/wwpc/.../clj2820_clj2840_bro.p...

Hewlett?PackardColour laser printing. HP Color LaserJet ... •Convert hardcopy documents into digital format for easy ... Color LaserJet 2820 All-in-One gives you high quality, ... Oth ring. Why HP. Save time. Printing a file. Printing a paper fax. Receiving a .... Install, configure and manage multiple networked ... Replace toner cartridges easily.

HP Environment: Product Safety Information - LaserJet ...


Dec 18, 2015 | HP LaserJet 2840 All-In-One Printer

1 Answer

How to reset supplies on HP 2840 laserjet?


"Would like report of supplies from 2840 laserjet. How to get it to show report"

Select 'Menu" button, then select "Reports", then select "Supplies Report".

This will print the status of the four toner cartridges and the drum.

It doesn't make sense to reset toner cartridges UNLESS you refill them
first. On the HP 2840 each cartridge/drum contains a chip that measures
the life of the unit.

You can purchase toner/chip combinations online cheaper than new
cartridges. I also purchase drum chips to extend the use of my drum
until print quality actually starts to deteriorate.

I use both of these methods to save money on supplies - buy toner and
toner chips, buy drum chip to get full use of drum unit.

Hope this helps.

Mar 19, 2012 | HP LaserJet 2840 Printer

1 Answer

I have HP laserjet all in one 2840. got massage replace supplies. replace black ink. massage still there. printer does not work. please help tell me what to do thanks, Troy


Did you purchase a new cartridge or refill? These supplies have a non-resetable chip on them that must be replaced when a cartridge is refilled. If it is an new HP original cartridge, contact HP and have them replace it. If it is a refill, contact whoever you bought it from and get them to replace it.

Apr 14, 2011 | HP LaserJet 2840 All-In-One Printer

1 Answer

My printer won't print---I just had the black ink cartridege refilled but it keeps saying replace supplies


Return the cartridge and use only genuine supplies with HP. HP cartridges have chips on them that dictate if they are OEM or not. Typically, if you use a refiller , these chips won't get reset.

Oct 20, 2010 | HP LaserJet 2840 Printer

1 Answer

The error reads "Install Supplies" and won't print. Just placed a new cartridge in printer


Go to the printer panel and make sure the drum and toner carts don't show empty. Try removing and reseating the drum and the toner carts. Also, see if it will print a supplies status page from the printer interface. You can also try to hold the cancel button for 5 seconds to bypass the error. Let me know if you need further instructions.

Sep 29, 2010 | HP LaserJet 2840 Printer

1 Answer

HP 2840 *(Error Message) = replace supply using black only Will only print in black All color and black toner are 75% or more full The drum was low so I replaced it just in case but error message remains.


By repalce supplies, it means that you have to replace the other toner cartridges and that it is only going to print black only

Al
Eliteprintersolutions@gmail.com

Apr 14, 2009 | HP LaserJet 2840 Printer

2 Answers

Re-installing yellow cartridge in HP 2840


There is a gray button right of the LCD display that has a black arrow circling clockwise and four color dots (magenta/black/cyan/yellow). Push it until you see the "Rotating to Yellow" in the LCD display, then open up the top of the printer by pushing the big gray latch next to the picture card reader at the right front of the printer. You now have access to the cartridge. pull it out and examine it. If it is a new cartridge, check to see if you pulled the plastic dam strip out (which keeps the toner in place in shipment etc).

Sep 07, 2008 | HP LaserJet 2840 Printer

1 Answer

Hp 2840 "Replace supplies"


If one of the color cartridges runs out the machine will switch to black only mode. However, I have found no way to force it to continue printing in color mode when any one of the cartridges runs out.

Apr 26, 2008 | HP LaserJet 2840 Printer

3 Answers

REPLACE SUPPLIES


Make sure all cartridge are install and secured into place...(take all the cartridge out and back in ) close front door cover and it will go into cartridge calibration...If not, press the "menu" key and with the arrow go to print quality and confirm with the enter key. Go to calibration and confirm...

Let me know....

Mar 26, 2008 | HP LaserJet 2840 Printer

Not finding what you are looking for?
HP LaserJet 2840 All-In-One Printer Logo

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...