An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: Brother Printer DCP150c
Driver could be corrupt. Disconnect the printer or at least be sure it is turned off.
I'd do both and reinstall the CD software program that came with
the printer. When the software program asks you to connect the
printer to the USB port, do so and it should again work properly.
Hope this helps. Bud
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Error "unable to clean" on Brother MFCHi there Solution: ·Machine off ·Switch on the machine while holding down the “menu”button until all the leds are flashing on/off. Now you are in “maintenance” mode. ·Press 80 ·Press the “mono start” button several times until you see “purge: xxxx” ·Press “2783” in order to reset the purge counter. You will see: “purge:0000” ·Press the "stop" button. ·Press “99” to exit the maintenance mode. Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
You need to isolate the problem. You tried using multiple cables and reinstalled the printer driver several times, but you never mentioned that you tried connecting the printer into another computer. What if the problem is the USB port of the computer and not the printer cable?
Try connecting and installing the problem printer into different computer for testing purpose only. If it work, then the problem is the USB port of the computer. To fix this, try updating the USB driver of your computer.
If same problem occurs using another computer, then you need to contact the manufacturer of your printer. I've heard this problem before and I don't have an update if there's a fix with it.
Unable to clean means that the waste-ink "sponge" is full. If you've already checked for small paper part (which is very unlikely, yet possible, to cause this error message), the error is mechanical. Unfortunately, that's not something us users can change, but the machine would require to be sent to service. So if your machine is not within warranty, I'd doubt it'll be worth the service cost.
Actually, there is a possability to order new parts, changed them yourself and enter service mode to reset counters.. But if it's worth it, good question.
try to turning on your printer then after that press ink management find the cleaning press ok. then press the arrow down to find color then press ok.wait a moment after finish cleaning make this 3 times...