Question about Computers & Internet

1 Answer

My computer only has pci slots whay kind of video graphices card i install

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 32,281 Answers
  • Sam Miller Jan 23, 2013

    Thank you very much.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
HeXx13505
  • 65 Answers

SOURCE: PCI Express slot not working

go into the bios and change the video settings from onboard video to pcie video

Posted on Mar 27, 2009

Joed911
  • 4338 Answers

SOURCE: mercury n1996.......AGP slot or PCI????

n1996 is NOT the model number. ALL MSI boards are labeled n1996 - it's their C-Tick number. You need to find the actual model number which should be listed on a sticker near the main CPU socket. Search for that on msi's website.
Let me know what the model # is..

If I could be of further assistance, let me know.
If this solves your issue, please be kind to rate it.
Thanks, Joe

Posted on Apr 27, 2009

Geekman
  • 32281 Answers

SOURCE: upgrading graphics card

Connect the monitor to the onboard video connector first. then
you need to disable the on-board graphics in the BIOS save the setting and shutdown. Then connect the monitor to the GeForce video connector and boot up then you will get a video signal on the GeForce video card.

Posted on Apr 29, 2009

brownleopard
  • 15 Answers

SOURCE: Need to upgrade video graphics card for HP a305w.

That computer has 3 PCI slots. (I got the specs here: http://www4.dealtime.com/xPF-HP-Compaq-A305W-Intel-Celeron-2-7GHz-256MB-DDR-40GB-HDD-CD-RW-10-100Mbps-LAN-Support-Wind ).

The 6200 is compatible, just make sure it's the PCI version and not PCI-E.

Posted on Jul 19, 2009

bob_computer
  • 3153 Answers

SOURCE: Onboard VGA port disabled, in Vista

You should try to disable it in the hardware list.

E-machines have an odd bios where not all the functions of the motherboard are available to the user.

If you can find the make and model of your board there is a good chance you can find the PROPER bios for it.

Emachines use motherboards from a variety of regular motherboard suppliers

My older e-machine has a hacked bios so that I can alter ALL the settings.

Posted on Aug 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does INTEL D915GLVG Motherboard supports Graphics/Video Card? OR Can I add Graphics/Video Card to INTEL D915GLVG Motherboard? - Kindly suggest me.


gaming is limited by the os that you have
gaming is limited by the speed of the cpu ( intel chip)you may even be limited by the graphic card that you can use in the mother board slot
when faced with all of these decisions and obvious lack of knowledge of what works best, find your self a computer repair shop and talk about upgrading to what you want
you say that cost is no object but to get what you want it will be a new mother board and fast chip ( probably a duel core or quad core) and a suitable graphic card for gaming
you can build a computer up from parts off the shelf and the cost will be around 1/2 the price of a computer from a retail shop and you will get exactly what you want

Mar 04, 2017 | Intel Computers & Internet

2 Answers

Where is the video card?


The video card is either on a riser card from your motherboard or integrated into your motherboard.
you can easily find out as it is the place your monitor plugs into your computer usualy with a blue 15pin D shaped plug.
or a larger white plug.

Aug 09, 2011 | Computers & Internet

2 Answers

I want to install a graphics card since I updated to windows 7 (which won't allow me to use some programs because it requires a video card). Right now it has a standard VGA graphics adapter but I wanted to...


that's easy, but you never said what "some programs" are
(infinite possibles and high end games worse)
or CAD/CAM or other 3D engineering and rendering progs.?
or top flight, Video Editing? omg.
but if you open said PC and see that mother board
you will see slots, the largest slot is the one
called PCI-e (express)
this PC came with ONBOARD
  • integrated
  • Graphics Processor Intel Extreme Graphics shared video memory (UMA)
the PC is a very old and low performance model.
this old PC has no express slots.
most cards sold now do not use PCI now, only PCI-E
express x16
your computer so old , it does not have AGP slot.
so is a relic.
but there are a few remaining companies that still make them.
even used PCI only VGA cards are hard to find, '
those slots are very slow as is all things there.
and will not ever run fast like a modern MOBO would do !
here is one, but I cant promise your unstated Prog will like it.

https://www.newegg.com/Product/Product.aspx?Item=9SIACUE5MM1048


No AGP , NO PCI-Express slots at all. just old PCI (x 3)
It runs 32 times slower that slot than any modern PC (express)
1220-q3ynongdx4nnghasmode251e-1-0.jpg do not expect something this old to run modern bloated apps well.
it wont. nor will it ever.

Nov 03, 2017 | HP Compaq Presario SR1220NX (PJ517AAR) PC...

1 Answer

What video card are compatable with SR1620NX ? The graphics card is not working right anymore and I need a compatable video card.


A PCI Express graphics card.

Doesn't matter if the PCI Express graphics card uses the PCI Express 2.0 technology, or the PCI Express 2.1 technology.

The PCI Express graphics card, will insert into the PCI Express x16 expansion slot on the motherboard.


Supporting data;

1) View of the motherboard in an illustration,

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00378480&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&lang=en&product=1127351

Scroll down the page to view the motherboard illustration.

A) Looking at the illustration, view the BATT. (CMOS Battery)

To the left of the CMOS Battery (BATT) are three white PCI slots.
Above them is a longer expansion slot. This is the PCI Express x16 slot.

Above it is marked > PCIX16X1 (PCI x16 times 1 slot)


NOTE* When installing the PCI Express graphics card, lift up gently on the Lock 'handle'.
It looks as though you should push down on it, but you need to lift up on it instead.


Also go above the motherboard illustration, and read to the right of the heading > Internal Connectors

In the list you will see > One PCI Express x16 graphics slot.


WHEN installing a graphics card, ALWAYS install the software from the CD disk provided, First!

Computer on, and Windows running, insert the graphics card's Installation disk, (CD) into the optical drive tray.
Install the software by following the directions.

THEN shut the computer down normally, and unplug the computer from power.
OBSERVE Anti-Static Precautions.
Install the graphics card.
Close the computer case, and plug the monitor into the graphics card.

Turn the computer on.

When you install a device (Such as a graphics card for example), Windows will try to find compatible drivers.
IF, THE driver is not installed First, Windows will match up one of it's thousands of generic drivers.

This = No.

You want THE driver installed first, so that Windows will find it, and Not try to match on of it's generic drivers.

NOTE 2*
It DOESN'T MATTER what graphics ram memory the graphics card has.
The graphics card's Processor and Ram Memory operates independent of the system resources.

Example:
The computer uses DDR Sdram ram memory.
The graphics card uses GDDR5 graphics ram memory.

It will work just fine.

NOTE 3*
It does NOT matter if your computer uses the PCI Express 1.1 technology, and the graphics card uses the PCI Express 2.0, or 2.1 technology.

PCI Express 2.0, and 2.1 technology is Backward Compatible with PCI Express 1.1 technology.

Will you get the full capability of the PCI Express 2.0, or 2.1 graphics card?
NO

Will you notice?
NO


What you need to look at it, is how much power will the graphics card use. Look at the system requirements for the graphics card, and be sure your Power Supply has enough power for that graphics card.

Also, IF, the graphics card requires additional power cables from the Power Supply, make sure your Power Supply has the required power cable, or power cables.
IF the Power Supply does not, use a power adapter cable.


NOTE 4*
Graphics card manufacturer's base the power needed for the graphics card, Not just on the graphics card itself, but on an entire computer system, AND the graphics card.

The graphics card manufacturers use a test computer system, that is a powerful computer system.
Gamer motherboard, Dual Core, or Quad Core processor, 4GB of ram memory, and at least two harddrives, and two optical drives, PLUS the graphics card in question.

This complete computer system uses a LOT more power than just the graphics card by itself.

There isn't a single graphics card out there, that uses more than 150 Watts by itself.

Recommendations for a graphics card that is compatible, with a Compaq Presario SR1620nx desktop computer?

Budget to medium:
Good enough to watch videos, older games, and some newer games.

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4675217&CatId=3670

Medium:
Higher level games, and large screen monitors,

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6642574&CatId=3669

For questions post in a Comment.

Regards,
joecoolvette

Dec 18, 2010 | HP Compaq Presario SR1620NX...

2 Answers

Hp a705w pavilion how to properly installed the video display adaptor


Since the HP a705w desktop computer comes with Integrated Graphics, I'm going to assume you are installing a graphics card.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00255589&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&lang=en&product=435558

The above is HP Support > HP 705w desktop computer > Specifications.

(Graphics Card, Video Card, Graphics Adapter Card, and Video Adapter Card, all refer to the same thing)

The expansion slot used for a graphics card is a PCI slot.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00063244&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&lang=en&product=435558

The above is HP Support > HP 705w desktop computer > Motherboard Specifications.

Scroll down the page to the motherboard illustration shown in Figure 1, and the motherboard photo shown in Figure 2.

In the illustration the PCI slots are at the bottom of the motherboard, and are named, PCI Slot 1, PCI Slot 2, and PCI Slot 3.

In the photo the PCI Slots are shown, and are White in color.

You can use any available (Open) PCI slot.
You can use a PCI graphics card. (PCI Video Adapter Card. Same thing)

Suggest you install the software (Drivers) from the CD disk that comes with the graphics card, First.

Turn your computer on, when Windows has fully loaded, install the disk into your optical drive. (CD/DVD drive)
Follow the simple instructions, install the software.

When the software is fully loaded restart your computer. Don't be alarmed as your computer won't use this software yet.

After Windows has fully loaded again, shut your computer down normally.
(Start > Turn Off Computer > Turn Off)

Unplug your computer from power.
Open the computer case.
Follow Anti-Static Precautions.

Anti-Static Precautions:

Your body carries Static electricity.
Static will fry out (Short Circuit) the hardware components inside a computer.
(Processor, Ram Memory, Graphics Card, motherboard chipset, Harddrive, and so on)

With the computer unplugged from power, working on a table, computer case open, TOUCH the metal frame of the oprn computer case.
This action will relieve your body of Static.

Should you leave your computer in the middle of working on it, upon your return be SURE to Touch the metal frame again.

There will be a metal slot cover, installed on the outside frame of your computer case. (Expansion Slot Cover)

This flat piece of metal will cover where you want the PCI graphics card to be.
It has to be removed.

There are several methods that this metal cover will be attached, to the metal frame of the computer case.

[ NOTE*
The metal expansion slot cover you have to remove, will Not be inline with the PCI slot.
It will be over one slot

Once you attempt to physically install the PCI graphics card, you'll see what I am referring to ]

1) To remove this metal cover look for an + in it. A flat tipped screwdriver is installed in the +, and the screwdriver is tipped down.
(The handle of the screwdriver is tipped down)

Looking at the back of the computer the expansion slot metal cover is horizontal.
The cover is twisted in an up, and down fashion to remove.
(Twisting from the bottom of the computer, towards the top, and then back down again)

There are small metal tabs that hold the metal cover in place. You are twisting the cover to break these metal tabs.

2) The metal cover is held in place by a single Philips head screw.
Remove the screw, remove the metal expansion slot cover.

3) I don't believe the a705w had a cover plate. A cover plate is hinged on one side. Usually a single screw is removed, and this allows the cover plate to swing to one side.
This action allows removal of all expansion cards installed.

Once the metal expansion slot cover is removed, line up the contact pins of the Video Adapter Card with the PCI slot.

Insert the video adapter card straight down in the PCI slot.
Install the screw that holds the video adapter card in place, to the metal frame of the computer case.

Close the computer case.
Plug your monitor into the video adapter card.
Plug the computer back into power.
WAIT 1 minute, turn the computer on.

For questions please post in a Comment.

Sep 28, 2010 | HP Pavilion a705w PC Desktop

3 Answers

Type of video card


The Compaq Presario SR1630NX desktop computer, has a PCI-Express x16 slot on the motherboard, for a PCI-Express graphics card.

The Presario SR1630NX came out in 2005.
PCI-Express 2.0 technology came out January 15, 2007.

The Presario SR1630NX uses the PCI-Express 1.1 technology.

You can use a graphics card based on the PCI Express 2.0 technology, however.

PCI Express 2.0 is Backward Compatible with PCI Express 1.1

You just won't get the full capability, of a graphics card based on the PCI Express 2.0 technology.

Will you notice?

NO


May 24, 2010 | HP Compaq Presario SR1630NX PC Desktop

1 Answer

Installing an mic geforce fx5200 128mb pci-e card on my emachines t3408, and it seems that the pci slots on my computer are reversed from the pins on the card. please help!


It seems to me that your computer has an AGP slot which is a much older type of interface. AGP is much older and they no longer use them.

From the model you posted, you have 1 AGP video card slot and 2 PCI expansion slots. there are some but very few companies that do make cards for PCI that will be much better than an emachine onboard video.

But your computer will not support PIC-E

Mar 01, 2010 | Palit Microsystems GeForce FX5200 Graphic...

1 Answer

Onboard video card is not working..What kind of External video card should I get


It depends on the age of the computer and on what type of slots your motherboard has. If it has a PCI-EX16 slot then PCI-e graphics card would be your best bet. Its possible that it has an AGP slot though. If its the AGP your graphics card selection will be small.

Aug 21, 2009 | Compaq Computers & Internet

2 Answers

Graphics card for my computer


Hi

I am afraid Dimension 3000 has no support for PCI-e or AGP Video cards. You can however install a PCI Video card in one of the three PCI slots. Just ensure that the PCI Video Card you get is universal (i.e. supports both 3.3 and 5 volts).

When you have your new PCI Video card, check here for guide to install the hardware.

Mike

Jul 12, 2008 | Dell Dimension 3000 PC Desktop

1 Answer

Reply to my motherboard


It looks like your trying to install a PCI Graphics Adapter. If that is the case, I would try the PCI Graphics Adapter any Slot other than Slot 1 or Slot 2. That is unless, your PCI Graphics Adapter Card is a PCI Express, then that must be installed in Slot 1, if the Board supports it. If the PCI Graphics Adapter is a PCI-I Card then it must be installed in Slot 2.

Check AMD's site, they have or already implemented standards on their support chips. The standard, as I understand it, is Slot 1 - PCI Express, Slot 2 - PCI-I, if you're using those Slot for PCI Graphics Adapter.

It should be possible to use those Slots (1 & 2) for any PCI Cards that is not a PCI Graphics Adapter, be careful, I have not checked that out. Those do not handshake as Video Adapter, so the PCI card should not be thrown or overdriven, the PCI-Express and PCI-I, to my knowledge is only for Grahpics Adapters, should that be different, then Slot 1 for only PCI Express Cards and Slot 2 for only PCI-I Cards.

Me, for now, Slot 1 for Express, Slot 2 for PCI-I, and the rest of the Slot for all else. If your PCI Graphics Adapter is not an Express or PCI-I, install in any Slot other than Slot 1 or Slot 2.

Dec 14, 2007 | EliteGroup (ECS 915PL-A2) Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...