Question about AEG Lavamat W1050 Front Load Washer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I'm not a technician, but I own a AEG Lavamat. As far as the owner manual says, this washing machine doesn't allow more than 5 kg.
Posted on Mar 25, 2007
SOURCE: Lavamat 16820
The reason the machine is coming up with E20 when drying.
is that there is a blockage of fluff in the dryer air duct on the right hand side of the machine just below the fan unit.
the air that goes through this duct is heated and returns back to the tub to dry the clothes. because there is a blockage in this duct the fan pushes air up the pressure switch tubes and fools the machine in to thinking that there is too much water in the drum,
too remove this blockage you have to disconnect the power supply, remove the lid and remove the back panel, 4 screws at the bottom + 4 up top under the lid. plull the water pipe with the valve out of the way and pull back panel away.
you should now see the dryer condensor unit blocked up with fluff. remove this unit and clean with bottle brush.
replace and make sure hoses are done up tight. replace back panel and lid, try again on drying and things should be alot better, drying should be alot quicker as well.
Posted on Oct 03, 2008
Ok, the motor windings are bad. the A.C. hum is a warning that the motor will sound when the windings are separated or shorting. its unable to hold a balanced current.the motor will actually stop soon if it isn't repaired.
Posted on Feb 16, 2009
SOURCE: AEG Lavamat 64810. No error
The fault has been described well by you and it is confirmed that the motor is not running. Now eventhough you have mentioned a clean chit to the control panel I would like you to take a voltage check on the motor when it is in wash cycle.
If the power comes on and there is no motor action then it is confirmed that the motor is fauly. But if there is no output of the voltage to the motor from the controller, the it is possible that the controller is faulty.
If motor is humming and is of single phase type, check the capacitor and replace if motor is humming and not running.
.I am sure you can sort this out having come this far.
Hope my tip helps
Posted on Aug 28, 2010
Tips for a great answer:
Aug 10, 2013 | AEG Lavamat W1050 Front Load Washer
Jan 19, 2011 | AEG Lavamat W1050 Front Load Washer
Mar 23, 2009 | Whirlpool Washing Machines
Dec 20, 2008 | AEG Lavamat W1050 Front Load Washer
Aug 14, 2008 | AEG Lavamat W1050 Front Load Washer
Jun 09, 2007 | AEG Lavamat W1050 Front Load Washer
Jan 12, 2007 | AEG Lavamat W1050 Front Load Washer
Aug 03, 2006 | AEG Lavamat W1050 Front Load Washer
Jul 01, 2006 | AEG Lavamat W1050 Front Load Washer
May 23, 2015 | AEG Lavamat W1050 Front Load Washer
176 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: