Question about Samsung DMR78AHS Builtin Dishwasher

1 Answer

What does mean error code 9e

It stop working 2 minute and error code comes up.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 245 Answers

THIS CODE INDICATES THAT THE WATER LEVEL SENSOR LOCATED ON THE SIDE OF THE D/W IS FULL OF GUNK AND DEBRES (I/E MOLD AND DEPOSITS) YOU HAVE TO UNINSTALL THE DISHWASHER, AND TAKE THE LEFT SIDE OF THE PANEL OFF ON THIS UNIT AND CLEAN THAT BOX OUT BY UNSCREWING THE WATER INLET HOUSING INSIDE THE DISHWASHER. (THAT GRAY SCREEN) UNSCREW THIS INLET ON THE LEFT INSIDE THE DISHWASHER. NOTE: THERE IS A SEAL ON THE OTHER SIDE OF THIS. DISCONNECT THE WIRE HARNESS AND THE CLAMP ON THE REAR RIGHT SIDE OF THE FLOAT BOX. BE SURE NOT TO GET ANY WATER INSIDE OF THE DISHWASHER OR YOU WILL HAVE TO DRY IT UP OR WAIT FOR IT TO EVAPORATE. I WOULD SUGGEST USING PAPER TOWEL WHEN REMOVING THIS PART. NOW YOU HAVE THE OPTION OF EITHER CLEANING IT OUT BY DISASSEMBLING THE BOX AND GETTING THE BACTERIA OUT, OR SIMPLY ORDERING A NEW ONE AND JUST INSTALLING IT. ONCE THE BOX IS CLEANED OUT, THE FLOAT MECHANISM IN THE UNIT CAN FLOAT FREELY TELLING THE WATER WHEN TO SHUT OFF. ONLY PERFORM THIS REPAIR ON A DISHWASHER THAT HAS THE POWER OFF TO IT.

Posted on Jan 25, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mc1bean
  • 3053 Answers

SOURCE: samsung dishwasher model dmr77 runs for 3 mins

Hello, kurt

I was trying to help you out here. I was going back to some customers that asked questions in the past and it appeared that no one answered them, so I thought I would take some of my personal time to see if I can help. Even though this site may not have your exact model or brand, This link will help you tons. Here is a link to about everything you want to know about your dishwasher, from repair to trouble shooting it,pictures, video's. Just scroll around and you will see tons of information to almost any question you might have on your dishwasher. If you go to this link and click around, I am sure you will find out so much about your dishwasher, you will know more that the company that made it. Here Is the link for you to click on>>

http://home.howstuffworks.com/dishwasher.htm


Please if this helped you at all, if you can find the time to rate my help and some kind words written would be appreciated for my free help , I would appreciate it. Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive,Appliance, and Electronics. Drop In anytime for my help. Thanks,Mike

http://beta.fixya.com/users/mc1bean

Posted on Oct 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AVH P3100. What does error code 02-9e indicate?


Error 02-9E Means there is a scratched or otherwise unreadable disc. The problem could be the laser as well. This error can mean any of the following:
Scratched disc
Improper media Bad burn/copy of disc
Improperly adjusted laser - requires an alignment
Dirty Laser Lens (smokers will experience this more often)
Laser failure etc.
Try changing the CD/DVD you are using and if you are still getting the same error, then try to visit you nearest Pioneer Service center and get your headunit's laser tested for allignment. How much you'd invest for repair must be below the cost of a new one or it's not worth it.

Nov 30, 2015 | Televison & Video

1 Answer

Samsung dishwasher code 9E


Internet search "Samsung dishwasher 9e error code". Many videos to watch to show you how to fix the problem yourself.

Sep 05, 2015 | Samsung DMT800RHS Dishwasher

1 Answer

ERROR CODE 9E


What is your model number?

Mar 13, 2013 | Maytag Refrigerators

2 Answers

9E error code on dmt800rhs dishwasher


I also had the 9E error code on my Samsung dishwasher DMT800RHS mmodel. I had to call Samsung and the nearest authorized Samsung service representative came to my house last Tuesday, January 29, 2013. The cost of the call is $100 which really annoyed me off considering the dishwasher is only 1 1/2 years old. Two South Korean guys showed up and to fix the problem just press down on the Heavy, Delicate and Power button at the same time for a few seconds and a menu will appear on the top left hand corner of the panel. Scroll down the menu by pressing the Normal button until you reach "FT" and the dishwasher will automatically fill up and then autimatically drain. If it does not drain then scroll down to "S" and the dishwasher will drain. Thsi should get rid of the 9E error message and your dishwasher will work fine but if not you have to repeat the procedure maybe 2 or 3 times until the 9E error message disappears. If you constantly get the 9E error message then you may need to replace the part which is about $60. The part is extremely sensitive to either hard water or food particles which is why the 9E error message appears. Therefore, scrape your dishes thoroughly so the food particles are minimized and the sensor does not go off which causes the 9E error message.

Nov 21, 2012 | Samsung DMT800RHS Semi-Integrated...

3 Answers

Box-t codes for Chorus MMDS anyone


00 is CE 19 2E 87 80 61 74 90

01 is AA 26 9E F2 E9 14 D1 AE

Apr 02, 2009 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Error code 9E What does that mean? Cannot find tech sheet


9E code is a door switch circuit problem.
You can check the wiring and connections and the door switch.
If the problem is not isolated to one or more of these parts then the control board is malfunctioning and must be replaced.
The manual states "unplug the dryer for 1 minute" "reconnect and if the problem re-occurs to check the components.
Maytag has a special circuit board that can be plugged in to evaluate the existing circuit board. Only Maytag certified techs have these test boards, and not all of them have it.
Check your door switch and wires.
The door switch is a inexpensive part compared to the cost of the circuit board. If in doubt, replace the door switch before proceeding.
Door switch part # y305753 and cost about $20.00

Mar 20, 2009 | Maytag Dryers

1 Answer

Frigidaire dryer feq1442e error code 9e, what does it mean?


The error code 9E indicates that low voltage is being detected at the control board of the dryer. This could be caused by the following factors:
  • The electrical power supply to the dryer is bad. Check the dryer outlet for proper voltage (120 volts AC).
  • Unplug the dryer and check the wiring of the dryer outlet plug. A loose wire on the terminal block could cause this problem.
  • If you are able to safely access the control board in the console, check the red wire that connects to the heater relay on the board. (NOTE: The dryer should always be unplugged when accessing internal components.) A loose wire or burned connection in this area could result in this error code.
  • A failed control board could cause this problem.
If you are unable to determine and repair the cause of this problem, I recommend calling a service technician to diagnose and repair your dryer.

Good Luck

Please rate FixYa!

Dec 19, 2008 | Frigidaire Dryers

1 Answer

What does the code 9E mean, I don't have my owners manual


9e means - Door switch failure
try this - Check door switch wiring or door switch or control board

Oct 04, 2008 | Maytag Dryers

1 Answer

Avh-p5900dvd... I keep getting error -02-9e and it wont play cd,s or dvd,s can you help.


Owner's manual doesn't really say what the -02-9e error code means other than a disc error. They do recommend resetting the unit as a possible solution:
  1. Turn the ignition off.
  2. Remove the faceplate.
  3. On the right side of the front of the head unit (with the faceplate removed), press the reset button with a ball point pen.
You may have to call Pioneer directly to find out what the -02-9e code means specifically. 1-800-421-1404

Apr 03, 2008 | Car Audio & Video

1 Answer

Avh-p5900dvd when trying to play dvd or cd comes up with...error-02-9e can you please help.


Here is the Pioneer error code table:

First Second Error
Digit Digit Description

0 No major error
1 Antenna not connected
2 Shorted antenna cable
3 RF circuit failure - PLL not synchronized
4 Undefined/Reserved
5 NVM Error
6 Defective CAP or not connected
7 Unknown DSP SW version

0 No minor error
1 CDEC Communication Error
2 SSDEC Communication Error
3 SSDEC No Response (DSP core freeze)
4 No signal/100% BER
5 Not activated
6 Not authorized

Your error indicates an
SSDEC Communication Error.

You should try resetting the unit to clear this error.

Apr 02, 2008 | Televison & Video

Not finding what you are looking for?
Samsung DMR78AHS Builtin Dishwasher Logo

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Dishwashers Experts

Dale Copeland
Dale Copeland

Level 2 Expert

102 Answers

Cindy Wells

Level 3 Expert

5165 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Are you a Samsung Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...