Re: We put new batteries in and still won't work! Help!
Try lightly rubbing the contacts where the batteries go with a scotchbright pad. Sometimes crud on the contacts prevent a good connection with the batteries.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is the fusible link at the positive battery cable not burnt and melted?To check positive battery from battery to starter,get a meter and test positive end at starter and ground other end,should get a reading of 12.6 or near to be good.
remember the motor transfer the power to the front..there no weight on the motor when you take it off..the motor can be going bad/a singnal! most people change the battery without checking the motor for wear..
It sounds like what you fried is the diodes on the alternator. You are probably due for a new alternator. On the bright side, it's much cheaper than the computer.
baterr ywas dead changed it-new battery worked-discharged once air turned on-put in 2nd bateer yseems fimne as long as you don't turn on the air-if you do there is a clicking inside radioconsole and discharges battery
×