Question about Office Equipment & Supplies

1 Answer

Canon ir 2220 ERROR CODE E261 - Office Equipment & Supplies

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 128 Answers

U NEED TO INVESTIGATE
the input/output ports of the DC controller PCBs.
COPIER>I/O>DC-CON<DC-CON (5/7)>
P020 xxxxxxxxxxxxxxxx=runs from left to right 15>0
ADDRESS=P020

BIT-
0- zero-cross signal -
1- heater trigger 1 signal 0: ON
2- heater trigger 2 signal 0: ON
3- heater error OFF signal 0: error
4- not used
5- not used
6- M9 registration motor phase A pulse signal -
7- M9 registration motor phase B pulse signal -

E261 0000
The intervals of zero-cross signals deviate from the tolerance range while
the fixing heater is supplied with power.
Main cause The wiring is faulty (short circuit, open circuit). The main power supply
PCB is faulty. The DC controller PCB is faulty.
Making Corrections
1. Connectors
Are the connectors J205 on the main power supply PCB and the connector
J308B on the DC controller PCB securely connected?
(zero-cross signal: J205-7 <-> J308B-1)
NO: Connect the connectors securely.

2. Main power supply PCB, Main controller PCB

Try replacing the main power supply PCB. Is the problem corrected?
YES: End.
NO: Replace the DC controller PCB.

Posted on Jan 22, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IR 2318. What is e261 error?


http://www.copytechnet.com/forums/canon/76193-canon-ir-2318-error-e261-dont-found-manual.html

Apr 05, 2016 | Canon Office Equipment & Supplies

1 Answer

Canon IR 2870 E261 error salved the problem


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/

Feb 26, 2016 | Canon Office Equipment & Supplies

1 Answer

How can i resolve the error code of E002-0000 on IR 2202? when i switch on it mark that error and refuse to operate please help us


I believe that model number is wrong......You must be referring to a Canon IR 2200 or maybe a Canon IR 2220. The Fuser has a problem when warming up. Replace the fuser or the Fixing film assembly and then the error must be reset in service mode.

Dec 03, 2014 | Canon Office Equipment & Supplies

1 Answer

How do I correct problem E261-0000 in ir 2420?


The error code is to do with the power supply, here's a brief flow chart to help you. Canon iR3300 Error Codes

Oct 11, 2014 | Office Equipment & Supplies

1 Answer

Error code e000602


Mounting fault of the HDD.Viring faulty.The main controller PCB faulty.Wiring between connector J1025 of the main controller PCB and the connectorJ 2005 of HDD,or try reinstall the system software,or try to replace HDD and download the system software,or replace the main controller PCB...

Sep 25, 2014 | Canon gpr-6 ir 2200/2800 drum...

2 Answers

E 261


have u changed the fixing unit.if yes then the code is from fusing.otherwise check the main power supply as it might not be providing supply to the fixing.If it is ok then u have replace the main board as it is not providing the control signal for fixing .

May 18, 2011 | Canon iR 2016i Black and White Copier

12 Answers

Cannon ir 3530 all error code and solution


Code Error name/description

E000 fixing overheating

E001 fixing assembly overheating

E002 fixing assembly low temperature

E003 post-standby fixing low temperature

E007 fixing film rotation error

E010 main motor rotation error

E014 fixing motor rotation error

E019 waste toner case full, waste toner case full sensor error

E020 toner clogging between sub hopper and developing assembly

E024 developing assembly connector disconnection

E025 hopper motor, bottle motor error

E032 NE controller counter error

E064 power supply voltage error (high-voltage)

E100 BD interval error

E110 scanner motor error

E191 communication error for high voltage power supply

E202 CIS home position detection error

E225 CIS light intensity error

E227 reader unit power supply error

E248 backup memory error

E261 zero-cross signal error

E315 image data error
E400 feeder communication error

Mar 03, 2011 | Canon ImageRUNNER 3570 Copier/Printer

1 Answer

Canon pc940 error code e261


try turning the machine off and then on...you either had a power surge and it freaked out your machine or the fuser is shot...

Dec 17, 2009 | Canon PC-940 Black and White Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...