Question about Weslo Cadence G40 Treadmill
This treadmill stops after using it for awhile. It starts right back up and we don't lose the display. I changed the reset switch and it didn't help.
You must LUBE THE deck belt by aprox 150 miles. In according with the schedule maintenance,
Please LUBE the deck belt+rollers bearing.
see the video
If the problem persist time to replalce the OLD board deck belt.
God bless you
Posted on Jan 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this types of problem occurred due to reason given below:-
1) if your motor belt too jammed. motor need more power to rotate it.
2) motor internal coil insulation problem.
3) semi short circuit in the internal control circuit.
how to check :-
at first look the label on motor try to find out the motor Ampere then measure with a ammeter if it drawing current is high from label mentioned ampere
then motor is faulty.
for check the circuit if u don't have any previous idea plz contact with qualified technical person.
hope that u get the answer.
Posted on Oct 22, 2009
SOURCE: My weslo cadence 845
There are Allen bolts on the bottom front of the treadmill as you face to console before getting on. Turning one one way and the other the other way will center the belt
Posted on Jun 15, 2011
Tips for a great answer:
Dec 26, 2016 | Weslo Exercise & Fitness
Nov 24, 2015 | Weslo Cadence G40 Treadmill
Jan 11, 2013 | Weslo Exercise & Fitness
Mar 09, 2011 | Cadence Exercise & Fitness
Nov 12, 2010 | Cadence Exercise & Fitness
295 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: