Cannot set my VHF & UHF stations on my 9 in Panasonic tv set from
The regular stations are set I do not know how to use the menu action button to set my other stations from VHF & UHF picked up set at resale shop shows great color picture but I can't get all my stations, will the new digital box help stations come in automatically. Help. Thanks I know they work because I had it in my brothers re-hab facility and they set it there. Thanks again, awaiting your help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is oftimes a little door/hatch that has levers and a thumb wheel start with 1 and roll the wheel till you get a channel. remember what channel it is as it is associated with a number say channel 10 so you would select 1 on your remote to view that channel Move on to the next channel 2 and again roll the wheel till you get another channel say 7 and so on so eventually channels 1234 have 10 7 9 and 2 you can even use the same wheels up to 99 If you exhaust position 1 select II and iii and iv as some are VHF and UHF. Some of the old ones also had a button for auto tune which did all the hard work for you. but a lot did not and were a pain to set up. look on top or on the front for the little hatch. Good luck
Your VCR has input to record video-audio signal. Here is 2 options to record program in vcr.
1= You need to hook up video-audio cable at Monitor Out in TV and video-audio in at VCR. select Line-1 or Line-2 (where you hook up cable) in vcr and insert cassette with Record Tab intact, VCR is ready to record TV program. select desired channel on tv and hit record button of vcr, recording will start.
2= Plug RF antenna / cable wire in RF In of vcr and tune desired channel in vcr (get help of vcr's user manual for that) and push record button to start record directly in vcr.
Have further query, let me know please.
There are probably a couple of different ways to hook things up. One is you hook the VCR "in between" the indoor antenna & the set. Hook antenna to VCR RF/Ant In, then VCR RF/Ant out to the Antenna input on TV. Your VCR will then be able to record one channel, while you watch another on TV. To play back the VCR, or do any VCR setup, TV channel must be set to either channel 3 or 4.
The other way is to use the Video & audio input/outputs on the VCR & TV. You will need the appropriate cable(s). Match the VCR video/audio outs with the set of inputs on TV. Video and audio out on the TV go back to the video/audio inputs on VCR. In order to view VCR playback, menu setup, you will need to select that input (line, aux, video 1 etc.) on the TV. This hookup probably won't allow the recording of a second channel while watching one.
As regards the hft channels, I assume you live in an area where such is being broadcast. The TV can probably be put into a programming mode where it will scan for all available channels, and put them into memory, or they can be programmed manually.
If you can get some of the stations without the box (often the case
for those who subscribe to digital cable or movie channels), then one setup is to split the raw cable and feed the box and the TV, then have the box feed the VCR and hook up the VCR composite video and line level audio outputs to the TV.
The VCR tuner would always be set to the VHF frequency your cable box RF output is on, usually ch. 2, 3 or 4.
This setup allows PIP to work, with the TV tuner limited to
unscrambled analog stations, and it also allows you to tape anything
coming through the box, while watching unscrambled analog stations on the TV.
However, it requires the VCR to be on and the TV set to the
external video input to simply watch what is coming through the cable box.
There are other ways to set this up with more flexibility using
splitters and A/B switches, or you can look for a special switch box
that handles the job.
The above assumes your TV has composite video and line level audio
The only way to have full flexibility to watch any scrambled or
unscrambled station at the same time as taping a scrambled station is to have 2 cable boxes. The only way to have your VCR control the
cable box and record different programs by switching the box by itself is to have a VCR with a cable box controller, also known as a cable "mouse".
Hope this helps