Question about Kyocera Copystar CS-5035 Copier

2 Answers

Touch screen on kyocera 5035 isnt working

The copier and print portion work but when i try to scan i cant select anything on the screen or when i try to fax i cant enter any numbers.

Posted by on

  • jpd8 May 11, 2010

    do you have the scan and fax options on the machine? Not just the buttons.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 513 Answers

Well if you see the scan and fax button on the operation panel this doesnot mean you have the scanner and fax card inserted inside the machine, those cards are options, in order to check if you have the cards. look to the right side of the machine, next to print cable should be another network port for the scanning card, and also you should be able to see fax ports below that. if you donot see any of this! this means you donot have those options available in the machine.

Posted on Nov 12, 2011

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

Look for a stuck key on the operation panel. Usually is the least used key, a grain of salt will do it!

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kyocera mita 5035 eror code c6000


i have kyocera mita this machine toch screen is working but numbers manual is not working please give me solution immediately

May 26, 2012 | Kyocera Mita KM-5035 Printer

1 Answer

Kyocera CS-C2525 won't scan


Do you have the option installed on you copier??? Also, there is another ether connector for scanning. If it is installed it is right above the print PCB.

May 22, 2012 | Kyocera Copystar CS-5035 Copier

1 Answer

Download printer driver for cs 5035


go to www.copystar.co,
look under download, choose legacy black and white copiers MFP
the under the subcategory select print driver, choose the KX driver thats support your windows version, then run it and you good to go. let me know!

Nov 23, 2011 | Kyocera Copystar CS-5035 Copier

3 Answers

My Kyocera KM-5035 receive error code 4200 in PC printing and in photocopy


Hello, This error C4200 indicates a problem with the main Laser Scanner Unit. The laser scanner functions to image onto the drum in the copier. It scans at a high rate of spped, the error indicates it is in trouble.

The Laser scanner would need to be changed.

It is also possible the main PCB is failing (remote chance)

Find a Kyocera Repair Facilty.

Dec 10, 2010 | Kyocera Mita KM-3035 All-In-One Laser...

1 Answer

I am just trying to find the driver for a Copystart CS-5035. I cannot find anything on the Kyocera web site.


www.copystar.com go to downloads. select legacy/mfp copiers. then select your model then under technical resources select drivers

Aug 03, 2010 | Kyocera Copystar CS-5035 Copier

1 Answer

Kyocera KM-5035 - I try to change the Developer Assy. I guess i have to make a reset in the service mode or something but i dont have the code. Can someone help me? Thanks!


After replacing developer unit
press

10871087

scroll up to u130
press print button
let machine run till it stops.
clear
u001
press print button

READY

Jul 10, 2009 | Kyocera Mita KM-5035 Printer

1 Answer

Copystar 5035 - drawer 2 - we had not been using drawer 2; tried to load it with 8.5x14 paper, however, now that we are trying to use the drawer, we are getting an error message "paper drawer is out of...


You have to reset the drawer by; 10871087 and run SIM 906

You should be able to just key in the Code you wish, then hit the print key to activate.

Then use the touch screen to reset then print key again.

Jan 26, 2009 | Kyocera Copystar CS-5035 Copier

2 Answers

We have a Kyocera 5035 Copier and getting a message "Page tray is out of order"?? Any ideas on what to do?


if you go into copy mode punch in 1087 1087 
press the green start button
punch in 906
press the green button 
select the option on the touch screen
press the green button
and wait until the machine reboots
this should fix any minor problems

Jan 24, 2009 | Kyocera Mita KM-5035 Printer

1 Answer

Kyocera km 2050


The 2050 uses 2 network connections, one for the printer and one for the scanner.
Before I go into any great detail,
Do you have a home network? Are you using a switch?
Are you printing through the network connection or the USB/parallel port?
Are you trying to twain scan? Do you have the software CD for scanning.
If not, you will need to download the drivers from the Kyocera web site.

Mar 08, 2008 | Kyocera Mita KM-5035 Printer

Not finding what you are looking for?
Kyocera Copystar CS-5035 Copier Logo

420 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Printers & Copiers Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

NewYork kyocera HP...

Level 3 Expert

513 Answers

pkwc

Level 2 Expert

254 Answers

Are you a Kyocera Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...