Question about Ovens

1 Answer

Zanussi Oven inside glass problem

Hi,the inside glass on my Zanussi oven model ZDF 866W has come loose,can you tell me how i can remove and replace this,and do i require a special sealant or seal?

Many Thanks for any help

Eddie

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Hi , i removed the door, and removed two small screws from the bottom of the door,you can the seperate the door into two pieces by slidng them apart,cleaned up the glass,bought a tube of heat resistant silicone and put some around the edges of the door and glass. I then replaced the glass,i left overnight to set and rebuilt the door.

Regards

Eddie

Posted on Jan 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to change the light bulb in the oven,.Mod.no.ZDQ695A can you help me.


I will assume that the ZDQ695 bulb replacement procedure is the same as that for the ZDQ695A. The ZDQ695 uses a 25 W appliance light bulb (300 C). Unplug the appliance before starting. Open the oven and remove the racks for space to work. Insert a flat blade screwdriver between the side of the oven and the glass cover above the bulb. With your hand support the cover and pry it away from the wall of the oven until it releases. Push the top of the cover towards the oven wall and use your fingers to pry the bottom of the cover away from the housing. Then remove the cover. Unscrew the old bulb (counterclockwise) and then remove the bulb. Then screw in the new bulb. Replace the glass cover (position the flange so that it is pointing to the back of the oven) by pushing it into the hole to cover the bulb assembly. Replace the shelves and close the oven door before plugging the oven back in.

Zanussi manuals are available here: http://www.zanussi.co.uk/en-gb/Support/Manuals/ . Enter the model number in the search box. Alternatively, the manual for the ZDQ695 is available here: http://kitchen.manualsonline.com/manuals/mfg/zanussi/zdq_695.html . Click on the Get This Manual button.

I hope this helps.

Cindy Wells

Jul 24, 2011 | Zanussi ZDQ695 Electric Double Oven

1 Answer

The external glass on the oven door has broken. How easy is the replacement?


Hi,
Here is a tip that I wrote about the oven door glass replacement...
It is not that hard...

Range/Stove/ Oven Door Glass Replacement
heatman101

Sep 16, 2010 | Zanussi ZBF360X Electric Single Oven

1 Answer

I broke the glass outside on the door of my Zanussi oven ZOB 646 QX model. The price of this glass together with the panal costs about 1/2 of the oven price. Can I replace this glass without buying the...


In my experience of repairing ovens, it is usually possible to replace glass without going to the expense of replacing whole panel.
Check with the manufacture.
Hop this helps.

Dec 05, 2009 | Zanussi ZHQ575 Electric Double Oven

1 Answer

Zanussi built-in oven ZDF 866W socket blows when turned on


sounds as if a wire to the fsd is shorting when oven turned on.

Sep 28, 2009 | Ovens

1 Answer

Inside glass fell out , how do i glue it back.


Everflex Heatmate
Temperature Resistant Glue upto 300 degrees c

Apr 24, 2009 | Zanussi ZBF360X Electric Single Oven

2 Answers

How to remove a fan/motor from a Zanussi oven


You are probably trying to undo the nut the wrong way.
It is a left hand thread, so to undo it, you go clockwise, as though you were trying to tighten it, and vice versa to tighten it up again. If you can't unscrew the nut, you will have to grip the fan spindle with something whilst you undo the nut.
Plz rate my solution.
Thanks.

Jan 22, 2009 | Zanussi ZHQ575 Electric Double Oven

1 Answer

Broken glass door


Depends on the model, check the link below to see if the glass alone is available, if it is not , that means that this is sealend inside the door.

In that case replace the whole door, or the oven wont bake evenly anymore.

See : Enter model number here to find assembly diagrams and parts.

Jan 01, 2009 | Zanussi ZBQ365 Electric Single Oven

1 Answer

Zanussi ZBF 660 oven door requires removing to access replacement of inner glass


Hi BisseeCath,

Not sure if you still need to get your oven door off still but I have the same oven and have spent the last several hours trying to remove it and searching the web to discover how to remove it until I have just discovered a wonderful video tutorial on YouTube www.youtube.com/watch?v=hSzc4Uqbbr8
that discribes exactly how to do it (just copy and paste it into your address bar.
It is the fourth and final instruction in the video but it really is easy.
The hinge is a latching over system type that folds back into the glass apparently.
Just get a screwdriver and where the end of the hinge dissappears into the housing of the oven just flick up the hinge with the screwdriver and the locking mechanism folds back towards you and the glass.
Once both are done just jiggle and pull up the door and it will remove easily....godsend!

Regards,

DIYDIM

Oct 10, 2008 | Zanussi ZBF660 Electric Single Oven

1 Answer

Inside glass of zanussi oven


Works on Zanussi ZBF 660 X Built In Oven.

To remove door:

Not sure if you still need to get your oven door off still but I have the same oven and have spent the last several hours trying to remove it and searching the web to discover how to remove it until I have just discovered a wonderful video tutorial on YouTube www.youtube.com/watch?v=hSzc4Uqbbr8
that discribes exactly how to do it (just copy and paste it into your address bar.
It is the fourth and final instruction in the video but it really is easy.
The hinge is a latching over system type that folds back into the glass apparently.
Just get a screwdriver and where the end of the hinge dissappears into the housing of the oven just flick up the hinge with the screwdriver and the locking mechanism folds back towards you and the glass.
Once both are done just jiggle and pull up the door and it will remove easily....godsend!

Regards,

DIYDIM

Jul 11, 2008 | Zanussi ZBF260 Electric Single Oven

2 Answers

Remove Outer Glass Of Oven Door


On my Zanussi ZDF 866 it goes like this:-

Rest the door with its top edge on your work surface. Once the bottom two screws are removed, pull the outer glass away from the bottom edge of the door just enough so that the brackets fixed to the outer glass (into which those two screws went) clear the bottom edge of the door. Then pull the outer glass up towards you parallel to the door (there are now screws hoplding the top edge on this model).

It may need one side to be pulled and then the other to release it from the metal slot at the bottom.

I would recommend great care with this given that a) your door may be different, b) it could be held more tightly and c) you are dealing with glass. Recommend taking all precautions including eye protection and suitable gloves. Proceed slowly and carefully (this did not need much force on my door). If you're not sure at any stage, choose discretion and either give up or pay someone to do the job to avoid paying for a new glass or hurting yourself.
Hope this may help someone.

Jan 25, 2008 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...