Question about Denon AVR-2106 Receiver

1 Answer

Denon avr 3000 speaker B is off ,is theres a code to turn it on

A denon avrI have 3000 an I can"t get speaker B to come on without the remote is there a code so I can reset my unit

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a Denon AVR-3000 and want to turn on the B Speakers. I have hooked up my subwoofer to the B connections on the Denon since there is not a subwoofer connection. How do I turn the B speakers on without a remote

Posted on Oct 06, 2010

  • Glenn Emond
    Glenn Emond Nov 26, 2010

    There is a subwoofer connection. Check your manual. You can download one if you don't have yours. If you connect the subwoofer to the right connector, you shouldn't have a problem connecting your B Speaker.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i run speaker test tone without a remote for a Denon avr 3200


The setup mode can only be entered using the remote on this model of Denon receiver

Mar 10, 2012 | Denon AVR-3200 Receiver

1 Answer

I have a denon avr 2802. the remote powers the


Try doing a factory reset by turning off main power switch.hold down speaker a and b buttons while turning on main power switch ,display will flash 3 time s then release buttons,this then returns unit to factory default settings.

Apr 13, 2010 | Denon AVR-2802

2 Answers

Protection error in denon avr-3000


Hi,

Do you know what caused the protection shut down in the first place? Did you short your speaker wires even briefly?

You could try to Unplug the Unit for Few Minutes, say 30 minutes and then turn it back ON.Usually that would fix the issue.

If you are going into protect mode with no speaker attached,chances are that your output Ic is in need of replacement .This is the most likely cause of a protection error that you are experiencing.I am having a bit of difficulty in locating specific part numbers but feel confident that replacing outputs will remedy your concern.For further info and parts or authorized service locations in your area I suggest to contact mfg at www.usa.denon.com/ .Click on support or call(201)762-6500.I believe that they have a flat rate service and will give you an estimate.

Still, on the remote possibility that it is just a glitch caused by momentary power interruption or fluctuation, try to re-initialize the microprocessor, a hard reset (not unless this is what you were referring to as rebooted). The reset should force the AVR-3300 to revert back to factory defaults removing glitches, errors in settings & configurations, memory & presets as well as user preferences.

* turn OFF the unit using the POWER button;
* press and hold both SPEAKER A and SPEAKER B;
* without releasing the 2 buttons, press the POWER button;
* release the 2 buttons only when the display starts to flash;
* in the event of no display flashing, repeat the process.


Should the above be not corrective, then it would be a hardware fault and not just a glitch.


Let me know, if needed further assistance.

Hoe i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Jan 13, 2010 | Denon AVR-3300 Receiver

1 Answer

I bought a used Denon AVR-1400 without the remote. I am able to control everything from the face except switching to front b speakers. How do I switch to b? I have tried every button on the face and have...


There is no capability to switch to front "B" speakers, the second "front" speaker output allows for bi-wiring a single pair, or running two speakers with identical outputs.

Sep 04, 2009 | Denon AVR-1400 Receiver

1 Answer

Denon avr-1403/483


Denon AVR-1403/483One of the speakers when connected trips the units power off.
Disconnected it and it works OK without that channel. Connected a different speaker and wire to that channel and it does the same, trips power off. It's acting like a when two wires are shorted. This is not the case as I have tried different wires and speaker. Not sure whats going on. Presently running system without that channel. Hope someone has an idea.

Oct 19, 2008 | Denon AVR-1403 Receiver

1 Answer

Denon RC-978 remote... every button shuts receiver off


Drop the front panel of your receiver,there is ZONE 2 ON/OFF switch.
Good day!
solutiondoct

Sep 12, 2008 | Denon AVR-2807 Receiver

2 Answers

Denon AVR 900


you need to put the volume up on those speakers you can only do that with the romete s you kinda stuffed unless you get the remote.

Aug 13, 2007 | Denon AVR-900 Receiver

Not finding what you are looking for?
Denon AVR-2106 Receiver Logo

Related Topics:

2,427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

jonpoint

Level 1 Expert

4 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Denon Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...