Question about Kenwood VR-305

Open Question

Kenwood vr305 I have a Kenwood vr-305 will not work .that blinks in standby mode

Posted by on

4 Suggested Answers

  • 4 Answers

SOURCE: I have a kenwood vr

Kenwood receivers recently have a commonly known problem with its receiving IR diode within the receiver, to fix this you will have to re-solder the connection on the receiver panel within the faceplate of your kenwood receiver.

Instructions to fix it are at the following link if you are willing to open up your receiver and repair it. lots of people have reported this fix as successful so it is widely believed to be a design flaw in the VR line-up of receivers as it has occured in all the VR families so far.

good luck.

Posted on Jan 22, 2009

  • 118 Answers

SOURCE: subwoofer doesn't work in stereo mode on kenwood

such is the case with sony receivers when stereo mode is used

Posted on Nov 03, 2009

  • 129 Answers

SOURCE: kenwood vr 357 surround system stand ny light

This means there is a problem with the system it is in the protect mode it will not come out of that mode untill repairs are made. More than likley the power amp is blown.

Posted on Nov 06, 2009

  • 1 Answer

SOURCE: Can I Get a Kenwood RC-R0608 Remote to work with a Kenwood VR-206 A/V Reciever

i WILL BUY YOUR Kenwood RC-R0608 Remote
rlupton@atral.com

Posted on Jul 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood vr 357 surround system stand ny light keeps blinking when turned on but no sound no nothing when turned on just powers up for 7 seconds then shuts off with light blinking


This means there is a problem with the system it is in the protect mode it will not come out of that mode untill repairs are made. More than likley the power amp is blown.

Nov 06, 2009 | Kenwood VR-357

1 Answer

Kenwood VR-509 Receiver won't power up...


Check all your speaker wires for shorts, especially behind the amp, doesn't take much for something to throw a spanner in the works, like when cleaning house and moving stuff around.

Oct 03, 2009 | Kenwood VR-509 Receiver

1 Answer

My kenwood VR 305 will not work with the remote what is the problem.


Hi..

Here's the link for the manual.
Also, try brand-new batteries and make sure they're in right.
Even I do that wrong sometimes

http://inform3.kenwoodusa.com/manuals%5CVR306.pdf

Nov 27, 2008 | Kenwood VR-305

1 Answer

Kenwood vr-305


Hi...

manual link here

Check the Problem pages

http://inform3.kenwoodusa.com/manuals%5CVR306.pdf

VR305 is included

the memory in the speaker setup might need to be reset

Nov 04, 2008 | Kenwood VR-305

1 Answer

Hooking up my sub woofer


Hi ..
According to the manual there's a pre-out (phono style RCA) connector for the sub but it needs to be a powered subwoofer..Has its' own internal amp

Jul 26, 2008 | Kenwood VR-305

1 Answer

Kenwood VR 208


It works sometimes, mostly the volume bottem

Nov 26, 2007 | Kenwood VR-506 Receiver

1 Answer

Kenwood VR-307 Receiver standby light blinking


Hello, sorry to say this, but there is a hardware error. Possibbly something is wrong at the output stage. Please send it to tech for a repair. But first disconnect the speakers and then try to turn it on. If there is no change the error is still present. Best regards. Arpi

Jul 17, 2007 | Kenwood VR-307 Receiver

Not finding what you are looking for?
Kenwood VR-305 Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

ask_not

Level 1 Expert

28 Answers

Fbcgilly

Level 1 Expert

13 Answers

Are you a Kenwood Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...